LC digital signature does not work in drive

Similar Questions

• Yoga 15 500 MICI - Dolby digital app does not work

  I improve my SDS HARD drive and reinstall Windows 10 and install it manually download Lenovo driver Realtek but Dolby digital plus app does not work? Model 500 15 DCI Yoga

  Comment to Moderator: The model is added to the object for clarity.

  I found a solution, if someone face same issue:
  Downloads of the latest drivers updates catalogs Microsoft

• spool server says error signature does not work, can't restart, can't reload printers, missing icon

  Personal computer running Windows XP with two printers, HP Laser jet 1020 and Lexmark X 2250 works very well yesterday. Today, print jobs are back with the error signature telling me that my spool server does not work.  I went and tried to restart my spooler, no go.  Icons for missing print/fax printers program and I can not reinstall the printers.  Same message arrives, spool server does not.  How can I fix it.  I ran the difficulty it program, produced works and still nothing.  Help please!

  Hi Wendy,.

  It comes down at the end of the previous instructoins, so it of nothing to do but to remove and reinstall the printer, then follow these instructions to do this:

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Let us know.

  Best regards

  Matthew_Ha

• my memory card for my digital camera does not work when I put it in the memory card slot

  I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

  Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
  then
  Device Manager
  Expand portable devices
  the type of memory card slots should be listed if your type is a yellow triangle in it,
  Right-click on it and choose uninstall.
  It should reinstall it automatically or when you put the memory card in the slot.
  This type of fault is often caused by not using material on the taskbar does not safely remove request.

• Satellite A300-1BZ - microphone does not work - need driver

  My microphone does not work & I can't find what kind it is to locate the pilot, can assits anybosy please?

  Hello

  The internal MIC is part of the webcam.
  Next to the sound driver, you will need to install the Chicony webcam software.

  You could test the microphone using the webcam software there is an option that allows you to record the audio stream

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.

• Fingerprint reader software Digital Persona does not work in my hp Pavilion Dv4-1235ee

  After the upgrade from vista home premium to Windows 8 32-bit. the Digital Persona fingerprint reader software does not work please help me

  Please use 'HP SimplePass Identity Protection 2011 software' which can be downloaded from the following link:
  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58540.exe

  Here is the link that explains how "install and use the 2011 SimplePass fingerprint reader:
  http://support.HP.com/us-en/document/c02946451

• Epson v500 Scanner does not work after driver update!

  I recently bought a V500 photo and scanned my first 35mm using Epson Scan v3.7.4 negatives. The colors seemed off so I download and installed the latest v3.7.7 of support to Epson.ca hoping that it might help.

  Following the upgrade of the driver, the scanner has stopped working! Loads of Epson Scan, but after 5-10 seconds, I get the message: "no response from the scanner. Make sure the scanner is turned on and connected properly. If you use the transparency feature, remove the reflective document mat. »

  Then I restored the latest install w / restoring Windows but still could not get the job to scan. I drove back to the pre - Epson scan install date and tried to reinstall the earlier version but still no luck to get scanner work.

  I then followed the steps of uninstall on the Epson.ca support site removed all the drivers and the software with the scanner turned off and unplugged. Then I reinstalled the old version of Epson Scan of the CD because he had worked at the start. I reconnected it the scanner it plug it in and turn it on. But it still does not work! Ditto for uninstall and reinstall with the latest drivers.

  Notebook P7350 using Windows 7 32 bit SP1. Scanner is connected directly on the laptop, not through a hub. I tried all 3 ports USB in the hope one would work, but no luck. All connections between the pc and the scanner seem robust.

  Any suggestions to get scanner work?

  Thanks for the reply of adeline. In the meantime, Epson come back to me when I contacted them again but only after I have disabled cookie blockers in Firefox when visiting their support site. The first time I've done this, and the support form has not sent correctly.

  It turns out that the scanner must be completely turned off and unplugged then reconnected after that driver installed. I discovered one of the records was not too tight that it should have been :-0 if I was sure I had checked it earlier.

  Thanks again.

• Formulas does not work in drive

  I have a simple formula I created in Acrobat that adds an entry for user 3 cells and displays the result in even a 4th cell. The formula does not work once I open the PDF in Reader. I used "extend features in Adobe Reader ' but this does not seem to make this function of formulas in Reader. Any suggestions?

  Is JavaScript and/or automatic calculations enabled for the drive? If Yes, can you put the documents online somewhere (for example, Acrobat.com) so we can check? If this isn't the case, I would be interested to look at if you are free to send an email. My address is in my profile.

• the plugin does not work in drive

  I compiled the project successfully, and I got the DdeServer.api file.

  He now works in the observer, but it does not work in the drive.  Why?

  What are the differences between support Viewer and reader support?

  OK - our samples in the SDK are for Acrobat NOT to the reader.  No attempt

  has made to build them for the reader.  If an API is not available for the reader,

  You can not use it there.

  You can do what you want - but I always recommend to people that they

  try to acquire the license FIRST because if Adobe does not give you the

  License (this is NOT a given that we do!) then all of your work has been

  wasted.  Better to know in advance if you will approve.

  No, a plugin with IKLA will be completely ignored by player - it won't be the same

  See or try to load it.

• The digital signature does not not after 11.0.09 update.

  Hello

  I use Adobe Acrobat Pro XI at the office and was able to use the digital certificate provided by my company and stored in the Windows certificate store to digitally sign PDF documents. After the update (11.0.09) that has stopped working; When I try to sign a document, I'm invited to create a digital ID or choose an existing one from a file; A digital ID for roaming, accessible through the server; A device connected to this computer. However, I can't use existing ID which is always available in the Windows certificate store and used to work before.

  (The same thing happens with the digital signature in Adobe Reader after the update).

  Has changed nothing about how certificates are used for digital signatures with this last update?

  Thank you.

  Kind regards
  Cornel.

  Take a look at my question. Possibly related: can use GoDaddy certificate to sign into Microsoft Office Word 2010, but not in Adobe Acrobat XI 10.0.09

• XPS 8900 Dell digital delivery does not work.

  I have this new computer and I'm trying to download the essencial Cyberlink software, but I can´t get the digital delivery to work. After some time of saw the logo of the tool, I received the message that he couldn t connect to the Internet and the tool stops.

  I tried with this suggestions, but it did not work:

  https://www.Dell.com/support/article/us/en/04/SLN85610/es

  https://www.Dell.com/support/article/us/en/04/SLN130099/en

  FRPORRAS

  Click on the link below to register and download the software to your computer. The site only works with Internet Explorer.

  My Dell downloads

• Created in Adobe Acrobat Java script does not work in drive

  Hello

  This is my first post, so I hope that I have chosen the correct path for her

  Let's get to the point:

  I created a java script in Adobe Acrobat according to your tutorial page:

  search.matchCase = false;

  search.wordMatching = "BooleanQuery."

  Search.Bookmarks = false;

  Search.Query (Mytxt ","Folder",".. /My directory');

  I found work as a call a relative link, because, after copying my file in another folder it would continue to operate. But when I open the same file in Adobe Reader I got a message on the Console:

  The built-in functions of EScript Acrobat Version 10.0

  Acrobat SOAP 10.0

  GeneralError: Operation failed.

  Undefined Search.Query:4:Link: mouse upwards

  Folder does not exist

  As I mentioned earlier the same file returns the results of the search.query in this folder in Acrobat. Any ideas? Suggestions? What could be the problem?

  And if you want only "under", you can use something like this:

  var fileNameParts = this.path.split("/"); "

  var ParentFolder = fileNameParts [fileNameParts.length - 2];

• PCIe-7842R (series R FPGA) digital output does not work properly

  Greetings,

  I'm having some problem show TTL the correct voltage with my PCIe-7842R FPGA board.

  The block diagram of my code FPGA LV Moose appears in "analog - digital .png '. The idea was to convert an analog input (decimal value) to a binary code and 16-bit output by 16 DIO ports. I use the connection block SCB-68 has as the terminal and trendy on the FPGA 1 connector RDIO with SHC68-68-RDIO shielded cable.

  The compiled code ok. But during the test, I noticed that some ports has no output TTL levels correctly. For example, for input 1000 decimal, I would expect binary code 0000001111101000. However, some ports (DIO #6, #7, #9, etc.), which are supposed to ~3.3V (1 digital) high TTL output, output actually 0.8V. I have attached the result measured in 'exit digital test.png '.

  To ensure that the question was not because of the code of the LV, I did some more tests on DIO #6 with a simple example (simple digital output.png). The output was ~ 1V this time at the digital 1.

  It's really confusing because of the digital Edition is supposed to be simple. I used the same FPGA card for controlling roller shutters with TTL signals before and it worked fine.

  Does anyone have similar problems? Any suggestions are greatly appreciated.

  iron_curtain wrote:

  DIOs are connected to a controller digital galvo Cambridge Tech. But I measured the voltage at the terminals of the connector block.

  If you unplug the controller galvo DIOs, do they look good (have the right voltages).  Do you know how many of these entries to the need for controller?  I think you hit the limit the total current available for EID within the Council.

• P0R94EA #ABU: brightness and HDMI does not work after driver update

  Hello

  I get a notification to update my drivers for HP Support Assistant that I took and I installed all the drivers involved and since that I can't not change the brightness of my screen or use the HDMI for display on my TV. I don't have the updates has been "Intel high definition (HD) Graphics Driver.

  Can someone help me with this please have tried different things from other sites, but nothing has worked.

  Hello

  Is there an improvement if you install the earlier version at the following link?

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72107.exe

  Kind regards

  DP - K