LCD, extented and Labview controls

Similar Questions

• Qosmio F55 - LCD replaced and brightness controls are reversed back

  Hello

  the LCD for my Qosmio F55-Q502 cracked and I ordered the same room and when I installed it, everything works fine and everything but the brightness up and down are reversed. As Fn + F6 makes more brilliant while Fn + F7 makes it more dark? The first that comes with it is a lp154wp1 (tl) (e1) but I had is a lp154wp1 (tl) d1).

  Does anyone think that the bit of a variation of the model can do reverse controls? Even on Windows when you cursor to the right BRIGHTNESS, it darkens and to the left, it illuminates. For anyone else who needs information on their Qosmio F55, the original is also a lp154wp1 (tl) (e1) and also known under the name of lp154wp1 (tl) (a3) which is written on the Board of the lcd screen. The replacement lp154wp1 (tl) (d1) is also known as a lp154wp1 (tl) (a2) also wrote on the lcd dashboard

  Any suggestion or help would be appreciated!

  Hi hulkster,.

  Where you have ordered the new view and it are a Toshiba original spare part?

  If yes I would contact an authorised service dealer or the store where you bought it. In my opinion the screen is not 100% compatible for your model. This would also explain the different reference numbers you posted

• Space required on target RT for LabVIEW Control design and Simulation

  Hello

  I want to run a DLL file on an RT target using LabVIEW Control design and Simulation, but I'm not sure of the required amount of RAM on the RT-target. My RT-target options are respectively cRIO 9002 and cRIO-9004 with 32 and 64 MB of RAM. Is this a sufficient amount of RAM to run the simulation? ¨¨

  Thanks in advance

  This will depend on the size of your dll, the size of the rest of the code, you can create other necessary drivers/modules, memory use when your application runs, etc.

  9002 and 9004 have not a lot of RAM on them and the minimum software installation to run a control application Design & Simulation (CD & Sim) will take around 22Mo of it (the majority of RAM available to the 9002). It would be possible to run your application on these two controllers if you keep it small but it will depend on what you want to do.

• mouse control, LCD Brightness and sound volume

  Hi, I am designing a VI that allows people with disabilities (with no hands) to use the PC-control with the mouse, the brightness of the LCD screen and the sound volume through several sensors. I found how to do to control the mouse but still cannot find how to control the brightness (using setdevicegammaramp) or volume (using waveoutsetvolume). can someone help me with these two functions please?

  Try the attached VI. I don't know if it will work for your configuration, since other factors are involved in the brightness setting, such as the controls of the monitor and video card settings.

• Implement and control 'meter' in S7 - 300 by the OPC and LabVIEW

  Hello world

  I use a S7-300 PLC and OPC Server for my projects. I have a problem: S7 - 300 has a meter module which digital signal of County. I only can implemented using SIMATIC STEP 7. Can I set up the meter module using only the server OPC and LabVIEW

  does anyone have a solution or an idea for my problem?

  could you please help me...

  Thank you

  Hi Echion,

  NOR-DAQ (MX) is used only for material OR: no you can not use it.

  To program the controller you must use the right programming environment. For Siemens S7, you need to use Simatic (or perhaps some other 3rd party software supporting IEC61131). Point.

  The OPC server is used only for the exchange of data. This is no interface programming!

• How to sit interface with matlab 2010A and labview 2010

  I use tools of simulation interface 5.0 with matlab 2010A and labview 2010, I want to take my cue from matlab, labview but signal transfer, I am facing a problem. I want to know is there any compatibility issue in sit 5.0 or I do something wrong?
  photos of errors are attached.

  natasftw wrote:

  http://digital.NI.com/public.nsf/allkb/02F5FA55FC28BDE1862578A30071F975
  While it is for 2011, I doubt that they decided to remove 64-bit compatibility as they went forward as 64-bit has become more rather than less demand.  In this document,notes LabVIEW Simulation Interface Toolkit does not support 64 bit versions of MATLAB application software."

  The extent of the compatiblitly for 32 - bit, I'd take a peek at: http://digital.ni.com/public.nsf/allkb/D174674A91E5536286257428005C2426

  The OP's question was SIT support 64 - bit version of LabVIEW and 64-bit version of the MATLAB/Simulink itself, not the operating system software.

  Document in your second link is on a completely different topic to have API for LabVIEW and MATLAB/Simulink/RTW (well, mostly Simulink & RTW). Here is the relevant link for the 32-bit compatibility: http://digital.ni.com/public.nsf/allkb/049295038FF0EE2A86257A06006B2DAD is no SIT 64-bit.

  Other underlying issues is that Pharlap does not have a 64-bit version. Finally, simulations are better performed on some RTOS (embedded PXI) for a deterministic execution rather than PC operating systems.

  -BTC

• Change the language of the LabView controls?

  I just need confirmation. If LabView controls, as a graph, have a context menu, then this menu will be first in the language of the LabView IDE, it is used with. If I create a new application, then the manufacturer includes the LabView RTE. It will also be the same language as the IDE version.

  Now, if I wanted to change the language of the context menu we will say to the french, it would be sufficient for the user has just installed a version in french of the RTE? Is this correct?

  AJMAL says:
  This will be useful?

  Yes, thanks. Another regional setting of RTE would replace the one we provide in our Installer and then the user would have the menu in its language. Very well!

• Save and read control values

  I have a program which is highly intensive GUI.

  It has almost 100 boxes of orders/combo of chain on the front panel.

  Once the user fills all the fields, I need to save all the values to a file.

  I don't care if the user can open/view/play the file, I just need LabVIEW to read.

  Later, it the user will need to load this file and all controls have to be filled from the file.

  From what I have seen when looking for boards of Directors.
  I heard a lot of suggestions like this that say I should

  all controls to group together, and then use the XML functions to read/write.

  I have attached a version very very simplified from what looks like the Panel front of the program.

  Do you agree with the above method? Or do you have another way you prefer?

  I would always try to automate it. Rather than treating each control manually, you can do something in this direction or change my previous example:

  

  The big advantage is that you do not have to write manually to the code for each single control and when you add controls he just continues to work. If the controls are not all channels, you can use the OpenG screws to convert a string of variant human readable.

• I use the latest version of firefox, but cannot print all downloads. I tried to use the icon to print the downloaded form and also control P

  I tried using the icon of the downloaded form printing and also control P, but only get a blank page. I even changed my printer, but it did not help. My print menu looks the same, and I have quite everything, print only with downloaded files.

  Hello, it's currently a bug in firefox's built-in pdf viewer that is studied by our developers. in the meantime, you can use a plugin third pdf as Adobe that you can enable in the firefox options > applications -scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• Satellite Pro U300: Low resolution on external LCD screen and a station

  I've got Satellite Pro U300 and LCD HP1907v and PA3542E-2PRP - docking station.

  When I connect external LCD for laptop - resolution is OK (1440 x 900). But when I connect the external LCD display in a docking station - the resolution is lower(), I can't change it, and I don't have some display options under Fn + F5 (that I had when I passed this lcd directly to the laptop).

  Help me find a solution, please!

  Yes. Latest Dynadock software must be installed.
  I checked the hardware specifications of the dynadock with DVI-d port and DVI supports a maximum external resolution UXGA (1,600 x 1,200) 24-bit.

• Satellite A200-1VP - Trackpad and the control volume

  Hello

  for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.

  My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.

  This seems to have brought the track pad and volume control to stop working.
  Are there drivers available that I could try to help to solve this problem?

  Thanks in advance.

  Hello

  I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.

  What version of operating system are you using (32 or 64 bit)?
  You have installed all the drivers?

• Satellite Pro A200 - need LCD bezel and cover

  Unfortunately my LCD bezel and cover (cover / back) is broken. I'm looking for replacements, but cannot find the right one. I am able to use the parties such as the a205, 210 series etc Pro and any other series which is compatible for me?

  Hi caribman,

  Have Hmm already you contacted an authorized service provider? Usually guys can order all spare parts Toshiba so I'm sure they can order the right parts for you.

  Here is a list of them, just get in touch with the guys:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• FN keys and volume control does not not on Satellite A210-131

  Hello
  I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...

  In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
  Help, please!

  Hello

  It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.

  I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.

• Equium A60-199: audio and video control buttons not working not

  Audio and video control buttons used to work for windows media player, but now they are not, I wondered if I had pressed or something changed by mistake, or maybe I need to take it to be fixed? Help, please.

  Hello

  AFAIK utility Toshiba controls must be preinstalled if you have correct functionality. Check this box on your device.

  Good bye