LCD screen detected as "Plug 'n' Play monitor" (HP tx2635us)

Similar Questions

• On computer portable plug-and-play monitor is primary and is a secondary monitor to the laptop and I'm not able to spend their

  I had been using my laptop with a plug-and-play monitor. I disconnected and used my laptop on its own. I did something (not sure what) with the with default advanced settings and plug-and-play monitor. When I reconnected it the plug-and-play monitor was the main and the laptop was secondary. When I disconnect the plug-and-play monitor, I can see is my office. I tried to restart and log in the menu will only appear on the plug-and-play monitor.

  Hi DonDC,

  What is the brand and model of the laptop?

  What happens when scroll you the screens using the function key on your laptop?

• non-Plug-and-Play monitor generic when win2012 imported from the FVO

  Hello

  I created a virtual win2012 with VMware tools instolled machine. I-ve it exported as part of a vapp, but when I import the vapp, ha win2012 a generic no/pnp monitor that I have to uninstall the OS otherwise start over completely.

  Any idea on how to prevent this issue_

  Hi friend

  Run the command "sysprep" before exporting the machine to the FVO.

  BR

• Blue screen: Plug and Play detected an error, probably due to a bad driver?

  Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver?

  I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death appeared saying that "Plug-and-Play detected an error, probably due to a faulty driver. She also asked me to 'Disable the BIOS memory options such as caching or shadowing the' but I don't know how to do this, because it does not appear on my BIOS settings. In addition, the message suggested that I go on safe mode, but whenever I try to go on Safe Mode, the Blue Screen of Death keeps re-appearance, so I can not go on Safe Mode or the other. And one other weird thing is that when I press F8 (press the key to early startup options) I get to select an operating system to start: Microsoft Windows XP Embedded which is weird, because as I said, my OS is Windows Vista and I don't have any other OS installed in my laptop. How can I solve this problem?

  Hi,                                                      Part 1 of 3
  (There is a 4 part added)

  These methods as well as those in the next 2 posts to troubleshoot BlueScreens. You
  can also post information that you store in a message in these forums.

  You can solve this a bit on yours with these little free programs.

  1. use BlueScreenView read minidumps and note the BCCode or stop codes, the Cause and
  the time.

  2. run MyEventViewer and search the entries at the time or a second (or) more before the BCCode
  or stop the BlueScreenView Codes.

  3. look for the code on FaultWire - ago usually excellent solutions.

  0x00000000 to 0x00000003F
  http://www.faultwire.com/solutions_index/fatal_error-1.html#IssueList

  0 x 00000040 to 0x0000007F
  http://www.faultwire.com/solutions_index/fatal_error-2.html#IssueList

  0 x to 0x000000BF 00000080
  http://www.faultwire.com/solutions_index/fatal_error-3.html#IssueList

  0x000000C0 to 0x000000FF

  0x00000100 or higher
  http://www.faultwire.com/solutions_index/fatal_error-5.html#IssueList

  4. position the BCCode or stop Codes, settings, the Cause and related information in a message
  detailed in this forum for assistance.

  ---------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =============================================

  Here is the example of the usefulness of BlueScreenView - it is small and automatic so very easy to use.
  With time MyEventViewer TRICK is very simple to check when the BSOD.

  Partial screenshot of BlueScreenView (first 1/2 page)

  

  ============================================
  
  Partial Screen Shot of BlueScreenView (second 1/2 page)

  

  =======================================================

  Double-click the line to dump high component file or file - properties with it highlighted.

  

  =======================================================

  Double click on the bottom panel line of file name or file - properties with it highlighted.

  

  Right-click on a line - report HTML Selected Items.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Number of processors	Major version	Minor version
  041110-22218 - 01.dmp	2010-04-11 22:42:11	NTFS_FILE_SYSTEM	0 x 00000024	00000000' 001904fb	fffff880'065a7bd8	fffff880'065 has 7430	fffff800'02c7c0c4	NTFS.sys	NTFS.sys + 213d8	NT file system driver	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6000.16386 (vista_rtm.061101 - 2205)	x 64		2	15	7600

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 does not recognize my Dell 2407WFP monitor - only as monitor not Plug-and-Play credits.

  This monitor is able to execute the resolution 1920 x 1200 and it worked well on the same laptop Dell Latitude D820 under XP Pro SP3. However, Windows 7 does not recognize the Dell Monitor (shows as non-Plug-and-Play monitor credits) and will go no higher than 1600 x 1200. The monitor on the laptop will run in 1920 x 1200 and also 1920 x 1200 poster XP running inside a virtual machine, so the problem is with Windows 7 not properly recognizing the Dell 2407WFP monitor in VGA mode. All other operating systems work very well to support the material properly.

  The laptop is running a NVidia Quadro NVS 120 M map. I tried several versions of Vista Dell drivers (do not have for Windows 7 - therefore Dell is not to follow). NVidia has no drivers for this card because it specially designed for Dell and all pilots must come from Dell (new Dell doesn't help here - I know that Windows 7 was just recently released but there are important suppliers for some time. Thought Dell was big by taking charge Microsoft with their business line of products but I think that even they cannot follow.

  It seems that the problem is also Windows 7 is not correctly identify the Dell monitor and many other monitors as well. Unfortunately, I doubt that this issue will never be resolved by Microsoft. I have yet to see that all the issues MS resolved long. I begin to see the truth in the last pub in Apple vs MS on television. Well the time to upgrade the new hardware.

  If anyone has a suggestion or a solution to solve this - I'm all ears!

  Don

  wait until that Dell publishes drivers for win 7 or you can contact them for the same thing.

• Satellite U200 - 1920x1080@64Hz on the external LCD screen resolution problem

  I am the owner of a SATELLITE U200 and I would use it with an external LCD display.

  The external monitor supports up to 1920x1080@64Hz.

  When I select the 1920x1080@64Hz option in the properties of the screen, I get an image enlarged and out of range of the scale. However, by selecting 1400x1050@60Hz seems to work very well.

  My question is: is there anyway I can get the 1920x1080@64Hz option working properly?

  Some info about my following system:

  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  Version of the BIOS Version 3.70
  Video Mobile Intel (r) Express Chipset Family worm = 6.14.10.4631 945GM (* even if intel provides versions of this driver newwer, this is the last custom by toshiba *)

  Intel(r) Graphics Media Accelerator Driver for Mobile report

  Report date: 13/03/2009
  Report time [hr:mm:ss]: 11:24:18
  Driver version: 6.14.10.4631
  Operating system: Windows XP * Professional, Service Pack 3 (5.1.2600)
  Default language: Spanish
  DirectX * Version: 9.0
  Physical memory: 1015 MB
  Minimum graphics memory: 8 MB
  Maximum graphics memory: 128 MB
  Used graphics memory: 14Mo
  Processor: x 86 family 6 model 8 Stepping 14
  Processor speed: 1828 MHZ
  Vendor ID: 8086
  Device ID: 27A 2
  Revision of the device: 03

  _Accelerator Information_
  Accelerator in use: Mobile Intel (r) Express Chipset Family 945GM
  Video BIOS: 1358
  Graph current mode: 1920 x 1080 True Color (64)

  Connected to the graphics Accelerator_ _Devices
  Active monitors: 1
  Active screens: 1

  _Monitor_
  Name of the monitor: Plug-and-Play monitor
  Display type: analog
  Gamma value: 2.20
  DDC2 Protocol: support
  Maximum Image size: Horizontal: 20.0 inches
  Portrait: 11.0 inches
  _Monitor Modes supported: _
  640 x 480 (60 Hz)
  640 x 480 (67 Hz)
  720 x 400 (70 Hz)
  800 x 600 (56 Hz)
  800 x 600 (60 Hz)
  1024 x 768 (60 Hz)
  1024 x 768 (70 Hz)
  1152 x 864 (75 Hz)
  1280 x 1024 (60 Hz)
  1280 x 1280 (60 Hz)
  1440 x 1440 (60 Hz)
  1920 x 1080 (60 Hz)
  1920 x 1080 (64)

  _Display power Management Support: _
  Standby mode: not supported
  Standby mode: not supported
  Active off the coast of the Mode: supported

  _Notebook_

  Name of the monitor: Plug-and-Play monitor
  Display type: digital
  Gamma value: 3.54
  DDC2 Protocol: support

  _Maximum image Size_
  Horizontal: Not available
  Vertical: Not available

  _Monitor Modes supported: _
  1280 x 800 (60 Hz)
  Display Power Management Support:
  Standby mode: supported
  Standby mode: supported
  Active off the coast of the Mode: not supported

  Thank you in advance!

  It s nice that your monitor supports the screen resolution 1920 x 1080, but you should check your owner's manual.

  On page B-4, you will find a list of the supported screen resolution and I must say that the resolution 1920 x 1080 is not taken in charge.
  You can select 1920 x 1440 but not 1920 x 1080.

  Sorry, but the material doesn't supports his screen resolution.

• Bad monitor or LCD screen cable on Qosmio X 505?

  Looking for a little help to solve my problem.

  About six months ago my web cam log if I moved the monitor back or front. A month or two later the monitor should fade a bit. I have to move the monitor to restore its brightness. The monitor will now completely black if moved. I have to close it and open the lid (monitor) completely so that he could appear at the back and it still does not work the first time... I am running an external monitor via HDMI to avoid the problem... I really need to this address.

  This sounds like a cable of the LCD screen or a monitor problem? Looking at what part to replace everything first.

  Thank you for your time.

  You know very well that this virtual path no one can say with certainty what the problem and this question must be verified correctly.
  I put t know why you don t tell us what model of laptop you have.

  Anyway, if you have the new Qosmio notebook with valid warranty I recommend to contact the nearest Toshiba service provider and let them solve this problem. Warranty will cover all costs.

• Turn off the screen on Tecra and using external monitor/LCD TV

  I recently bought an LCD TV and was anxious to use it as a monitor for my Toshiba Tecra M2V. I ran into problems.

  I seem to be unable to 'disable' the laptop screen and ONLY use the LCD TV screen at cary, work, games etc. I seem to be rather only beable to COMBINE the LCD with my LCD screen, by creating a "two" screen I followed all the online help and I am still unable to have one screen.

  I just want some LCD TV as my screen!

  Any ideas on how to do this? It's really a pain!

  TIA

  Hello

  Usually, you should be able to do this by using the FN + F5 key combination. As far as I know if the device is connected to the TV, you have three options (maybe depends on the laptop model) LCD only, LCD and external, just the TV device.

  You can also try to switch using GeForce properties:
  Display properties > settings > advanced > GeForce tab > Device Settings > Select output device.

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• HP Pavilion dv6-black screen only works with the external monitor

  I discovered that my screen was not turn on yesterday when I tried to turn on my laptop. Fortunately I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I can not really be restricted to my living room or office to use my laptop.  Y at - it easy fixes to this, or is my only option to take it to someone with experience that replace the monitor for me?

  Hello

  Given the external screen display there are so few opportunities...

  -Sun display-project is a flashlight on the screen and check if you can see the bottom - if background is visible while it is the backlight in the LCD screen that needs to be replaced.

  - Display dark: if it is completely black and nothing is visible when you Flash light on the screen, then it is due to the LCD screen itself might be a broken screen (a cable that connects to the motherboard screen) or could be inverter LCD.

  If the laptop is still under warranty so I recommend you call HP tech support and they will be able to get it fixed for you.

• Windows XP 32 bit ceased to recognize plug and play devices.

  Recently, I had a virus and had to reinstall windows. After installation, I've updated all the drivers and Windows updates. My mouse, keyboard, monitor, and wireless adapter to work correctly. After about 3 weeks, I went to install my printer. I installed the hardware, but it could not connect to the printer. I followed the instructions of the manufacturer again and again but it never connects. His grateful sound because when I turn on the printer or offshore, I hear 'bing', but it doesn't connect. I used the "New hardware found" Wizard with the disc in the drive and it looks right and research, he never does the program on the disk. I tried to use the camera to Windows and the scanner Wizard with no luck.
  After that I gave up, I tried to use my camera, that has worked well until I reinstalled it and it happens "New hardware found" and the "new hardware detected" appears, but it does not recognize the CD, just look and watch for hours. I got fed up and finally bought a "plug and play" card reader SD and the bubble appears in the toolbar "new hardware found", but then the "new hardware found" stands and asks a disc! Its a PLUG and PLAY! There is no disc! The material is on the device! It's not my USB ports because he DOES not see something trendy and I checked Device Manager and he said his work without no problems found, but it does not connect to it. Does anyone have any info on what this might be? ANY help with this is greatly appreciated! Thank you

  Hi pressure,

  Peripheral Plug n Play need driver for the operation.

  PnP means that you do not have to restart the computer to install something.

  I suggest to update the drivers for the chipset of your motherboard and see if a firmware update is available for your BIOS.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Plug a second monitor using a VGA to a USB adapter, Windows 7

  I am trying to connect an old monitor to my desktop computer all-in-one HP, but is of the old VGA monitor that is the block with 2 screws on each side.  So I bought a VGA cable of the USB adapter, because neither my office or my old monitor have AVI or connections HDMI and my office had no VGA port.

  Now Windows does not detect my screen when I plug in, and I used the disc that came with the adapter cord and the monitor has its own power and old video audio style that I have the ports on my desk.

  I'd appreciate any help you could give me it please and thank you.

  Hello

  Please contact Microsoft Community.

  I understand that you are trying to connect an additional monitor to your desktop from the description of the problem, HP all-in-one and having problems in there.

  I suggest you refer to the suggestion given byAndre Da Costa in the mentioned thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/confifgure-and-use-multiple-monitors-in-Windows7/e87ec2c5-885f-45D6-800F-9ba5f3962b8f

  I hope this helps.

  Kind regards
  Anusha

• Satellite 5100 - LCD screen no longer lights

  Hi, I hope someone will help me on this problem.

  After disassembly of the top satellite covers the lcd screen that does more, but I guess the system is working properly because I can hear windows access "jingle". I think that I reconnected it all cables (green and white connectors for the video card), but I'm not sure thin brown/white/black cable of the lcd screen. That's all

  Hi stefano88,

  Why you have disassembled the LCD?

  To be honest I n don't know cables, you want to say you also plugged the UPS FL for LCD display? This is necessary because FL inverter controls the backlight of your screen.

  Can post you a photo of the cables you want to say?

• LCD screen moves on my laptop satellite

  Hello!

  LCD screen of my laptop is moving! It looks like its not glued to the screen!
  His works always fine, but it's a little boring.
  I just discovered it a few days ago and worried. Is there something I can do?

  Thank you!

  Hello

  This issue is not known to me, but it certainly isn't usual display behavior. You can try to check on an external screen to see if there is the same situation. If the external monitor everything works fine, I imagine that the LCD monitor may be defective.

  Make sure you also all the display settings are right (resolution and color quality).

• How can I enable UPnP (Universal Plug and Play) or NAT - PMP (NAT Port Mapping Protocol) Protocol?

  I'm trying to set up the screen Edovia and they say that I need to enable UPnP (Universal Plug and Play) or NAT - PMP (NAT Port Mapping Protocol) Protocol.

  How can I do this?

  In Airport utility. The form is in your router.