LCD screen triggers - Satellite L300-1BV

Similar Questions

• Need information on screen on Satellite L300-255

  Dear Sir
  I want to know how the laptop screen Toshiba Satellite L300-255 and the dish.
  Thank you

  Hello

  All Toshiba laptop parts can be ordered from your countries local Toshiba ASP.
  You can also buy a LCD for the L300 with certain 3rd party suppliers.
  Satellite L300-255 takes to load a screen 15.4 wxga (1280 x 800) and there are a lot of offers in the price of the internet from 120 (2nd part of the hand).
  New part might be a bit expensive

• Satellite L300-1BV - how to connect to the TV?

  Hello
  Should what cable I plug the Satellite L300-1BV to my TV?

  Thanks for the answers in advance

  Hello

  What video ports you have on your Satellite L300 of output?

  I have the Satellite L300 too but he has only normal VGA output. This means that I m using a cable RCA VGA adapter to connect it to my TV. After that I connected the cable that I turn on the TV and then the laptop. On the laptop, you can switch between monitors now with FN + F5.

• Satellite L300-1BV and fatal issues with WXP

  Hi guys -.

  Very well. My Toshiba Satellite L300-1bv, loaded with a copy of Windows XP SP3 home edition, started having glitches and slowing down questions that grew progressively until it would completely freeze after a random interval of time. Try to boot now returns a missing hal.dll error.

  I'm almost certain, given the characteristics of this that the hard drive is a failure, mainly because he began to thrash continually without reason a few months in him. On the other hand, it could be a mistake of memory through Google diagnostics.

  I ve managed to install a copy of Windows XP Home SP1 edition on a new partition (the one broken leaving intact), but I don't know how long it will continue to operate in light of a possible hardware failure so I don't want to commit.

  Any help would be massively appreciated.

  Hello

  What assistance do you have exactly?

  As you say the problem could be related to a hardware (RAM, HARD disk problem) or software (missing hal.dll, corruption of the operating system) problem

  If new OS installation (with all patches, service pack) no did not help, then a problem of material is possible in this case, replace defective parts
  No one can say what part could be corrupted it s is necessary to test means that the RAM or HARD drive needs to be replaced and then you could test how it works

  PS: there is a nice tool to drive HARD HDD Fitness called diagnosis test for google's free simply

• Strange screen on Satellite L300 problem

  I have a laptop Satellite L300. Lower third of the screen is gray and the right side of the bottom has third vertical lines of color similar to a bar code on a supermarket product.

  If possible, connect your laptop to external monitor or a television to see if the same appears here.

  If so, this is caused by a faulty graphics card. If not that cell phone s display defective and must be replaced.

• Need LCD screen for Satellite A10 S811

  My screen laptop for some reason any (must have hit somewhere) does not work properly.
  So I have to replace because I need my laptop for my work and I have a lot of files that I need.

  My laptop is 4-5 years so I don't want to pay a whole fortune to replace my LCD screen
  This is the A of Toshiba Satellite series with screen 15 inches.

  For the month next (until 27 August), I'd be in Paris because of some jobs and I need repair my laptop so that I can work.

  If anyone knows anything, where I can get a screen at a reasonable price, please respond as soon as possible.
  I found this site selling LCD screens http://pchub.com/uph/category/115/15-TFT-LCD.html but im not sure which one to buy for my model is.

  Please, any help is needed... It s quite urgent.
  Thank you very much.
  yours,
  Andreas chouliaras

  Hi Andreas

  As you probably know the LCD and mobile motherboards is one of the most expensive parts. The new parts cost a small fortune
  I studied a bit on the net and found this site with 15 compatible screens for a Sat A10.

  The new view costs about $ 325... so it s really not a cheap part!

  http://www.screentekinc.com/Toshiba_Satellite_A10--15-inch--1024x768-XGA-laptop-LCD-screen.shtml

  What do you think about part of second hand?

• Upgrading processor on Satellite L300-1BV

  I've already updated the laptop of a T1600 (Celeron), to a T3200 (Pentium Dual Core). But no one knows how far I can go to level P 478 processors?

  If so, could provide you the processor numbers?

  + The message was edited: model number changed on the subject.

  Satellite L300D-1BV is know for me. This model number is correct?

  However, in general, you should check the compatibility of the chipset.
  Where the chipset is compatible and would support the CPU, you have good chances to make it work.

  But I'm not sure if BIOS would be able to manage the new processor properly.

• Can satellite L300-1BV - I ask Toshiba for the installation CD?

  Hello

  How could I go ask Toshiba for the installation CD? My laptop (L300-1BV) came with the pre-installed operating system, so I can ask them for the CD?
  But I don't know how I'd go to this topic.

  Any advice?

  Hello

  I think you mean the Toshiba recovery disc. Is this correct?

  If yes you can create yourself Toshiba recovery disc. So start the Toshiba recovery disc creator to create this diskette.
  This disc you create operating system preinstalled with all the drivers and tools of Toshiba. It s also called settings factory or let's say the same thing that you started the laptop time first.

  Normally, you get a recovery reminder message and I think that this information could be useful for you:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Satellite L300-1BV - series of blue screens

  Hello

  normal startup - impossible

  safe mode - for 5 minutes of most, the screens, then blue, giving various critical errors

  -checked with a Vista Ultimate DVD to reinstall the OS, do not:

  "error - \windows\system32\ntkrnlpa.exe file is missing or damaged.

  I ask me to insert the original CD (DVD) installation.

  I don't have one.

  Where I can get one? Any solution is welcome.

  Thank you

  Hello!

  The ntkrnlpa.exe is part of the operating system. This means that it should normally not a problem software or driver.
  To me it sounds like that, your Windows installation is damaged and I think that there is no other way except reinstalling Windows.

  You can reinstall Windows Vista if you go into the advanced boot menu and select Repair my computer. After a few seconds, you can choose the Toshiba HDD recovery option that reinstalls Vista again.
  It only takes a few minutes and after that relocation, you must create the Toshiba Recovery disk because it sounds like that you didn't create a still. So start Windows Toshiba recovery disc creator and you need 1 or 2 DVD-R discs.

  Good bye

• Satellite L300-1BV you can file a copy of the recovery disks

  Hello
  Just out of curiosity.
  I have not tried, but I heréd you can make a copy of the recovery disks, using the toshiba disk creator.

  I just thought it would be faster posting this question, rarther than to try.
  I don't know it costs £30 for a copy of the recovery disks, which led me to think are for people who did not create recovery disks or people who lost it copy recovery disks.

  I myself only one copy

  No, you can do as much as you want. But it only works on the L300

• Re: Satellite L300-1BV - create your recovery disc ISO images

  I wondered about this.
  Could make my recovery disc ISO images, I know I could just make a few extra copies, but I am learning to create ISO images.
  But I was a little worried about what would happen when I put a disc in the drive...

  This along with the recovery image is a bit complicated, and something like this is not possible.
  All you can do is create recovery DVDs using Toshiba recovery disc creator or directly start the HARD drive recovery using recovery Toshiba (F8) option.

  You can do with it what you want but how you want to start the installation later?
  Sorry, but I think that it will not work.

• Installation of an adapter bluetooth on Satellite L300-1BV

  I don't know why this is but, when you install a bluetooth adapter and you have a mobile phone as a device listed in the control panel > bluetooth devices.
  and you went through the whole upward from the implementation of the device
  And then you try to connect to or from the computer, it does not connect...

  But it connects instantly if you right click on the device > select control > so that your 'bluetooth operations and parameters.
  And from there I can transfer files to and from the computer.

  But I have trouble, try to connect simply by sending a file from the phone of his self...

  Someone at - it had the same problem and can give me some advice or it's just the way it is...

  (windows vista Home premium)
  (Adapter usb bluetooth 2.1 trust)

  Last stack of BT, you can download it from the center of Information of Toshiba BT under http://aps2.toshiba-tro.de/bluetooth/

  I use it with built in the BT module and I don't know that you can use with the third party material.

• Satellite L300-1BV - error windows could not start

  When I try to start the laptop it know
  "Unable to start windows. To address the recovery of insert problem disc etc, but I have nothing of this
  below it I got an error message

  file: \windows\system32\winload.exe

  STATUS: 0XC000000F

  Info: the selected entry could not be loaded because the application is missing or corrupt

  can anyone help?

  Of workaround I posted in another thread, but it should work in your case too.
  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  Goodbye & good luck

• Re: Satellite L300-1BV: I want to use Draft N - how to disable Wlan in BIOS

  I think trying a new network adapter, which has the N Protocol.

  But I was told its best to disable the network adapter in the BIOS first realtek wireless and not Device Manager as I thought.

  So basically what the correct way to do it in the BIOS instead of me in there without real knowledge of where to look.

  Any advice on this...

  (windows vista Home premium)

  Hello

  I put t think the BIOS contains such option, that could allows you to disable the internal WLan function.

  If you want to use Draft N (802.11 N) using an external adapter (WLan USB stick), then I don't see any other solution to disable the wireless card in Device Manager.

  But to be honest I do not know if disabling the internal WLan card is required m
  I expect that you would not need to disable the internal WiFi network in order to get the other treatments of the WLan card.

• Satellite L300-1BV case in bulk and seems like loose hard drive

  Hi, not a huge problem but just thought I'd get extracted. Case seems to be its loose where I left my arm on the black band near the mouse and power buttons, like when I rest my arm when you type it clicks and squeaks on the right side and getting on my nerves. (Don't ask).

  Another thing, the hard drive seems to loose, since that is also clicking on. I tried to tighten all the screws available as I can see, but nothing has changed or helped... everyone knows a similar problem? Don't want to send it so that can be helped because it will take a while to come back and I need to use the laptop every day for work.

  Thanks in advance.

  Hello.

  It seems you have weird problems with your laptop. I think you did some updates to the laptop and now you have these problems. The Panel of the black band, if you see a space between the mouse control panel and the microphone at the entrance, you have left a black thing (square shaped) somewhere before you put everything together. This black thing is used to cover the wireless switch. Also, if it could not solve the problem, it is normal if the gap occurs after a bad upgrade.

  Yoru driver drive HARD, there are several reasons for this. * I propose to restore the laptop to the service to check * I hope you didn't break the security bulletin or they will charge you a bit.

  Kind regards.