Leak memory for iOS Adobe Access API problem

Similar Questions

• Will be the leak memory for the queue when it is used in producer and mode of consumption data acquisition transfer different size table.

  In data acquisition, I use a loop to query the data from the hardware, another loop to receive the data from query sent by queue loop.

  Each time the size of the transferred data matrix is perhaps not the same, so the system can assign different table size and recycle frequently.

  It cost memory leak. Or it will slow down the performance, given that the size of the array is not fixed, so everytime need to create a new array of size.

  Any suggestion or the best method.

  If I understand your description, your DAQ loop acquires data with the parameter of the function of reading-'1 ' for reading at the DAQmx samples. This translates into different picture sizes.

  Passage of these tables directly to a queue is valid and she didn't mind important in performance (at least AFAIK) and it certainly does not leak memory.

  So the question is more or less:

  It is valid that the consumer receives sizes different picture for analysis? How your consumer manages these tables?

  hope this helps,

  Norbert

• warnings to leak memory for the elements in a form

  We meet the warnings below in our newspapers:
  
  WARN [nucleusNamespace.atg.dynamo.servlet.pagecompile.DAFDropletEventServlet] (ajp - 0.0.0.0 - 8109-110) form elements 29057 added to the last item of the form /shop/wishList/viewWishList.jsp.addItemsToCart name project/commerce/wishlist/WishListFormHandler.wishItemValueObject.quantity.27025374. Form elements are saved permanently if this table continues to grow, it's a memory leak. Recode your page in order to use consistent names for form elements.
  
  Added form elements 21542 WARN [nucleusNamespace.atg.dynamo.servlet.pagecompile.DAFDropletEventServlet] (ajp - 0.0.0.0 - 8209-57) to the last item of the form /shop/wishList/viewWishList.jsp.addItemsToCart name project/commerce/wishlist/WishListFormHandler.wishItemValueObject.quantity.28506088. Form elements are saved permanently if this table continues to grow, it's a memory leak. Recode your page in order to use consistent names for form elements.
  
  Thank you
  
  Published by: 986774 on February 7, 2013 05:39

  After getting the leak memory, look at DropletEventServlet in the Navigator component of/dyn/admin, and you can see the accumulation of mappings element of the page in question form. DropletEventServlet is a component to extended global (regardless of the scope of managers form she monitors) and does not remove the entries over time (which is why it is important to not use IDS in the form element cards FormHandler, and he issues a warning once you 500 for a form).

  My guess is that the bug you see is a fixed bug CCS been resolved in more recent versions of the ATG (2007.1 and later versions). You can see a newer version of the ATG to see if the form is always encoded in the same way.

• Memory for the dimension 2400 choice problem

  I am looking to order more memory.  A concert stick would be nice.

  My problem is the manual system provided with the Dimension 2400 says this:

  DDR SDRAM memory architecture
  Two memory connectors
  Capacity of memory 128-,-256, or 512 MB

  Maximum memory 1 GB
  Memory type PC2100 (266 MHz) and PC2700 (333 MHz) DDR
  SDRAM (non - ECC)

  To purchase memory from Dell Web site says this:

  Memory Dell approved

  Maximum memory: 2048
  Number of slots: 2
   

  512 MB memory Module for Dell Dimension 2400 / 2400C / 4600 Desktops $ 33,14

  1 GB Memory Module for Dell Dimension 2400 / 2400C / 4600 desktop $ 55,14

  If the Dell system manual is not saying 512 k by maximum stick and the Dell store saying 1 GB max stick?

  I would like to get a 1 GB stick.  What should I do?

  Hmm... I just read on user 1 GB stick magazines that many are running in their Dimension 2400.

  Message edited by Newbee video on 14/08/2008 16:59
  
  

• Leak memory for the El Capitan mail

  Hello

  I installed el captain and discovered that using mail instantly crashes my computer.

  I took it to the apple store and they don't have any advice except wait for the fix to update operating software.

  I found some other threads about uninstalling 3rs advantage software mail, but that does not apply

  They mention also change some e-mail settings, but they don't work that my computer is frozen instantly if I run the mail application

  Any other advice?

  It is a broad topic, how could apple perhaps launched an operating system with this major fault, and why have they not all their team work to remedy immediately?

  I have my entire office tied up in this email, seriously apple job, he meets

  bump

• Adobe Access - new drmNativeInterface.framework for iOS 8

  Hello

  We are a company that uses Adobe Access for more than one year and up to now, we are very pleased with the fact that Adobe 4 access can support content DRM playback on desktop / Android and iOS with no problems.

  But recently, to prepare the next iOS 8, I upgraded my development iPhone 5 and iPad 2 to iOS 8 beta and tdrmNativeInterface.framework it starts to work incorrectly. Sometimes I can listen to my content DRM HLS, sometimes just drmNativeInterface.framework stuck in the Middle without error or exception (this problem quite often as 7 of 10 times). After debugging line by line, this is the piece of code that make the stucked frame without any error or exception.

  1. the frame sometimes stops working when we try to get the singleton instance of DRMManger

  _drmManager = [DRMManager sharedManager];

  
  

  2. sometimes it stops when trying to analyze the M3U8 url:

  [_drmManager getUpdatedPlaylist: m3u8Url ]

  error: drmErrorHandler

  ( updated:^(NSURL * newPlaylist, DRMMetadata * newMetadata) {}

  NSLog()@ 'List updated M3U8 Player URL to the licensing process');

  //Successfully retrieved metadata link

  m3u8PlayList = newPlaylist;

  _Metadata = newMetadata;

  }];

  3. sometimes it stops when the DRMSession is initialized (after authentication of the users is complete)

  _SESSION = [_drmManager]

  createDRMSession:_metadata

  playlist:m3u8PlayList

  ( error:^(NSUInteger majorCode, NSUInteger minorCode, NSError * platformError) {}

  NSLog (@ "Unable to get the DRM Session");                     

  }

  full:^{

  NSLog()@ "The DRM Session successfully obtained");

  }];

  Most of the time, it stops when we try to get the instance of the singleton DRMManager (number 1)

  I can assure that the framework works very well with iOS6 and iOS7 (although the iPhone 4 with iOS7 crashes so that a lot during the initialization of DRMSession).

  If there is new version of drmNativeInterface.framework, please let me know where we get one like the drmNativeInterface.framework we use is old enough (for iOS5 I think).

  Thank you very much.

  Jack

  We received a call from Adobe this morning discussing Adobe Access support on iOS 8.

  For someone who has the same problem, here's the answer: you need to update your complete Adobe Access platform to the Adobe Primetime platform to run on iOS 8, the current SDK is no longer supported.

  We do not know how much work needed to be done as Adobe Primetime does not HDS support and for each platform Adobe will implement a native SDK, which means that we have pretty much REWRITE all of our applications. It is shocking for us news as our all our applications (Desktop, Web, Android) have been built using Flash.

  Adobe, please tell us before hand if you guys have a big decision like this.

• Leak memory like PC problem

  Hello

  I'm leaking memory like PC problem. When I put my cursor over the text, it highlights it, and if I put my cursor on an icon he drags it everywhere. I tried restarting several times and even go into safe mode and yet the problem presists.

  system of care in a few words:

  I have a Toshiba satellite laptop running Windows 7 x 64 bit and an AMD Radeon graphics card and a quad core CPU. I have Java installed and my ESET antivirus. My anti malware program is Malwarebytes anti-malware.

  Thank you and have a nice day :)

  Hi Alan,

  I sincerely apologize for not be able to address your concerns on a timely manner.

  Please keep us informed of the status of the issue.

  Regarding the material, I suggest you contact the local computer technician or the manufacturer of the computer for better assistance.

  Please let us know for any further assistance. If you have questions, you can always post here at Microsoft Community.

  Thank you and best regards,

• Animate CC 2015 Air for iOS full screen problem

  Hello team Adobe,

  I made many applications for iOS and Android. And I am facing 1st time a problem only in the Air for iOS. Air for Android works perfectly well. What I'm dealing with that

  even after using this code:

  internship. Align = StageAlign.TOP_LEFT;

  stage.scaleMode = StageScaleMode.EXACT_FIT;

  I see black bands top & bottom of my application. Then I downloaded the new SDK is Air SDK 21.0 but same problem :/ Please tell me as soon as POSSIBLE, why is that happening?

  Thank you

  Saad

  Hi Saad Aftab,

  I tried with the attached draft you shared.

  If this problem could be solved if you add images to your project.

  Please try the application after giving the images of the launch of the publication. The application will launch in full-screen and there will be no black bands if you have already configured the 'true' parameter in app.xml.

  Please let me know if you face any problem.

  Thank you

  Adobe AIR Team

• If you subscribe to the CC can you access CC for ios

  I subscribe to CC and I noticed that the CC for Ios is available I can access with the same account. Thnks, Rhiannon

  Hi Rhiannon,

  Yes, absolutely!

  Adobe mobile and tablet apps | Adobe Creative Cloud

  Kind regards

  Sheena

• Download Adobe Access iOS SDK

  Where can I download the iOS SDK Adobe Access? I'm looking to integrate Adobe Access into my application native iOS.

  I found several references to it on the Adobe site, including Objective-C API documentation, but I can't find a download link.

  Thank you

  Please contact the seller.

  http://www.Adobe.com/products/Adobe-access.html

  Thank you!

  Hiroshi

• Is it possible to limit Adobe Revel to synchronize only on Wi - Fi for iOS devices?

  Hello

  Is it possible to limit Adobe Revel to synchronize only on Wi - Fi for iOS devices?

  I don't want to exceed my monthly data quota. I can't find an option for this in the settings.

  Thank you

  There is not currently a framework for this. I suggest to disable the automatic import feature if the quota of data is a problem and that you have defined to 'on '. You can reactivate when you use wifi if you care to use it. I will introduce this management feature products for review. Thanks for your comments.

  Guinot

• Adobe Reader for iOS is unable to open the PDF documents protected by IRM.

  Hello

  trying to open documents protected by IRM on an iPhone or an iPad.

  (Player-version is 10.1.0 (49458) - on final iOS5).

  When X 509 authentication and anonymous authentication is enabled,

  There is an error message, that the failure to connect to the IRM server.

  When only the authentication ' Username/password name' option is on,

  Sometimes a different error like "error to open the document.

  In this case, the LiveCycle-WWW server shows only two successful calls Server/FYI /, but the next POST to/rmws/rest/secure/license/consumes is missing

  2011-10-20 12:27:33 192.168.0.42 INFORMATION/rmws/rest/secure/server/192.168.10.10 - 443 - HTTP/1.1 Adobe%20Reader/10.1.0+CFNetwork/548.0.3+Darwin/11.0.0 - 200 0 0 389 1647 15 lcrm.devrms64.local:443

  2011-10-20 12:27:33 192.168.0.42 INFORMATION/rmws/rest/secure/server/192.168.10.10 - 443 - HTTP/1.1 Adobe%20Reader/10.1.0+CFNetwork/548.0.3+Darwin/11.0.0 - 200 0 0 389 1647 15 lcrm.devrms64.local:443

  • What authentication methods are supported for MRI-docs on iOS?
  • What could be the problem?

  Thank you

  Dilettanto

  Please read http://blogs.adobe.com/security/2011/10/just-released-adobe-reader-10-1-for-ios-and-androi d.htmland referenced inside FAQ. Please make sure that you run the correct version of the server, SSL is configured correctly, and that the policy associated with the document you are trying to open via the name of user and password authentication does not have a watermark.

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• How can I highlight a pdf secure reader Adobe DC for IOS?

  I exported Adobe Pro XI a secure PDF. During the process, I selected to allow the highlights and text of the PDF as the privileges available. It works with the desktop version of DC Adob reader (windows 10), but when I open it upwards in Adobe for IOS on iPad, all editing privileges are locked. I tried many differences within the parameters of security, nothing is done. What can I do else?

  Hi Gary,.

  Currently it is available for the desktop version of Acrobat Reader to annotate secure PDF documents. You can fill out our feature request form:

  Feature request/Bug Report Form

  Thank you

  Abhishek