Leakage of electricity in case of external HARD drive and Satellite S70 metal surface

Hello
I have a toshiba Satellite S70-B-10Z laptop.

I use the following external box.
https://www.Ms-tech.de/eng/index.php/product/detail/PDCI...
The case uses AC adapter DC 12V.
the outer shell sprayed PIN.

When I use it, I feel in the surface, static electricity, a spark but something like friction.
The same feeling is on the metal surface of my laptop, when the case of HDD is connected via interface USB3.

A portable Earth pin?
Portable computer AC adapter is model: PA5181E-1AC3 part no.:PA - 1121-60
Card verification, I think that it is not based... that the pin adapter that is plugged into the laptop looks like bipolar...

What is your suggestions?
Is there a risk for my laptop?

Is no danger to the laptop and the use of the laptop.
These symptoms may appear due to the electrical contact.
As mentioned by other members, these occurs because of the capacitive coupling in the diet by peripheral isolation connected to the power outlet.

You can solve this by using a power adapter 3 pins.

Check this thread on the same topic
Forum.Toshiba.eu/showthread.php?67785

Tags: Toshiba

Similar Questions

  • I want to back up why iMovie on an external hard drive and.  retain the ability to modify the backup version

    I want to back up why iMovie on an external hard drive and.  retain the ability to modify the backup version. Thank you for helping me best wishes, Garvin Bazzell "Bazz.

    You can in the finder copy your library to EHD. Make sure that the EHD are formatted OS Extended journaled. Open the library in iMovie to make sure that it copied correctly.

  • # 500-164 HP model: backed up my files in 2 external hard drives, and then made recovery, came back and recovery error

    I saved my files to two external hard drives and then did a recovery.  After the end of the recovery, it says error recovery and no change to the computer.    I left that screen and booted up, but the computer does not go to the lock screen.  Circle of HP logo lights up and goes, but nothing happens.

    How can I get to the lock screen?   I have tried F11 and Esc.

    BreBruce-Tampa

    Your post shows your PC than the execution of win10, but it comes preinstalled with Win8x.  This means that at some point, you've done setting at Win10 level, and unfortunately, that corrupts the information of HP recovery: HP Recovery Manager blocked after Windows 10 Upgrade - HP Support Forum's - 5170752

    Once you do this upgrade, the ONLY way to perform a recovery after that use HP recovery media.

    Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.

    Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC.

    You can try to contact the HP customer directly, using the links below, to see if you can order them if:

    If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

    If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

    ---------------------------------------
    However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
    ---------------------------------------

    If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Good luck

  • Windows 10 on pc itunes is on pc but my CD is on an external hard drive and I want to keep them there, but how can I get itunes to use does them everyone please have a fool proof statement

    I need to download iTunes to use my CD which is on an external hard drive and would like to keep on it. Please can someone tell me just how to do this

    My advice make a library of portable split is a general guide, but as such, it has all sorts of details that you may not need.

    I guess you have previously installed iTunes such as library files were in the usual place of C:\Users\ < user > \Music\iTunes but the media were on an external drive, for example in X:\ < Media folder >, and no longer have access to the old library, or are perhaps new to iTunes, then so be it you will need to start over again. If, then hold down the SHIFT key when you launch iTunes. Keep now until you see a prompt to create or choose a library. Click on create and make a new library at the root of the external drive, i.e. as X:\iTunes , where X is the drive letter of the external drive. Once this operation is complete, use Windows Explorer to move the existing media folder within the X:\iTunes\iTunes Media, rename the folder that you moved as say other media to avoid any possible confusion in the future, select the menu with Ctrl + B bar and use file > add folder to library, to import the file to other media in the library. Will everything that iTunes adds to the library be shuffled around. All that remains in the other media will be happy that iTunes does not know what to do with such incompatible media or album art carried out by Windows Media Player. You can sift throigh this, take what you want and use replacements for all players what you keep.

    If you need me to explain it further, do not hesitate to ask.

    TT2

  • How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

    How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

    Keep all the files on external hard drive image?  Nothing else and no pictures on the desktop?

    Keep all image files both places?

    What is the best way to go through thousands of images in the Organizer to identify and place them in files?

    Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?

    As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!

    As I only have the version of the EP, here is some info on the organiser:

    https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html

    Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.

  • My netbook does not read my disk even if his reading of my external hard drive and the dongle

    My netbook does not read my disk even if his reading of my external hard drive and the dongle

    Hello

    1. what operating system do you use?

    2 did you change on your computer?

    3. did you receive an error message?

    I suggest you to follow the links and check out them.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

  • Windows 7 Professional... How to get access to security to view my external hard drives and external flash dirves

    I am a first time user to windows 7 Professional and need to learn how to access files that are connected to the computer by an external flash drive or an external hard drive.

    External or external flash drives hard drives can be connected to windows 8 computers or windows xp to view the files, but when then identical external or external flash drives hard drives are connected to two computers with windows 7 Professional there are settings automatically don ot all access to the external hard drive or flash drive external files.

    When the computer display, it displays the external hard drive.

    When I left click top produces a pop up with the title bar: location is not available

    Content: H: | is not accessible.

    Access is denied.

    When I right click on the hard drive and then click the Security tab, it displays:

    Name of the object: H: |

    To continue, you must be an administrative user with permission to view this object's security properties.

    Do you want to continue?

    Then I clicked on continue and it displays:

    Owner

    You do not have permission to view this object's security properties.  To view its security properties, you can try to take possession of the object.  As owner, you can also control who gets the permissions on the object.  Please note that once you take possession, the previous owner may not have access to the object.

    To try to take possession of the object, select an account from the list, and then click OK.

    Name of the object: H: |

    Current owner: unable to display current owner.

    Change in ownership to:

    the two choices are my name or administrators

    I then chose an and apply and ok and it did not work.

    I then chose the other and apply and ok and it did not work.

    Then I clicked on other users or groups and entered everyone and that no longer works.

    I am the only user of this computer brand new.

    When I click on accounts Panel then user control and security for the family and then user accounts, it displays my name as administrator password.

    What are the steps that I can buy an external hard drive or buy a flash drive or use the ones I already have and use them with this computer which has windows 7 Professional?

    How is the switch of the property did not work?

    I went back to safety again and this time stayed at the bottom for special permissions or advanced settings.

    And yet when I kept getting location is not available

    H:\ is not accessible.

    Access is denied.

    How do change you windows 7 Professional so that you can have access to your own files on an external hard drive or an external flash drive.

    Please list the steps.

    Thank you

    This problem has been resolved in collaboration with support of higher HP for Z book 17 mobile workstation.

    Steps:

    (1) determines that it is not NTFS problem

    (2) using the MSCONFIG the problem has been isolated to a single service

    When this service has been disabled and after reboot, the problem of access to the files is resolved.

    Results: HP had installed software on the HP Z book 17 laptop or mobile workstation which, by default, block communication with external hard drives and flash drives external.

    This HP Client Security software replaces or blocks all right click changes settings become apparent.  It blocks the change of ownership.  It blocks the administrator privileges.  It blocks all is used.

    The HP Client Security software has been changed and changed to deny privileges (default setting) to allow the communication with external drives.  When you go into the setting for this software, it is now a humming noise and maybe I need to download the drivers and software again to see if this problem is also corrected.

    Thanks for your comments.  I spent a lot of time on this and didn't understand why all right-click methods had failed.  The default software setting HP deny had trumped right click all changes.

  • Each folder in my external hard drive and Flash Drives have all been replaced by cmd shortcuts by accident

    I don't know how it happened but one night, I unplugged my external hard drive, and I remember vaguely the prompt being opened by accident after I plugged the external drive again the next day. The computer says my drive needed for formatting, that does not make sense because my drive was not related at the time. Well, when I reconnected my drive and restarted the computer, each folder in my external hard drive, I created in recent months, had been changed to shortcuts by the computer. The target location for each folder on my external hard drive and readers flash is (C:\Windows\System32). So whenever I click on a folder for documents, it will open in another screen, but I can't ever see as a folder only content inside, I need to find a way to cancel some setting in my computer that changes every folder I creat in a shortcut that reads-card: cmd (C:\Windows\System32)

    Hi Gordon Gekko.

    It seems that the data on the hard drive is damaged. I suggest you plug the drive on another computer or another port on the same computer to see if the data is accessible.

    If you take a backup of the data in the drive and try to format the drive.

    For more information, see the following link:

    Formatting disks and drives: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

    You can also use your favorite search engine to download third party software to recover the data and then format the drive, so it's is more corrupt.

    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope this information is useful.

  • Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk.

    Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk" HELP me PLS
    I'm going crazy because of this

    Hello

    1. What is the format of the file system on the external hard drive?

    2. are you able to copy or move files into the computer?

    You can follow the suggestions mentioned below and check with the question.

     
     
    Method 1:Delete CCG, prefetch files.
     
    Step 1: Delete Temp files

    (1) open the window run (Windows key + R)

    (2) type %temp%, and then press ENTER

    (3) delete all Temp files in the Temp folder
     
    Step 2: Delete Prefetch files

    (1) open the window run (Windows key + R)

    (2) type %temp%, and then press ENTER

    (3) delete all files in the Prefetch folder.

    Method 2: Run the tool (SFC.exe) System File Checker, try to copy the files and check.
     
    Follow the form of measures the following link: http://support.microsoft.com/kb/929833
    Method 3: Run the check disk then try to copy the files and check.
    Note: If bad sectors are found in the hard drive then it could try to fix this particular sector. If you have any data on that, it can get lost.
     
     
    I hope this helps!
  • All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

    All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

    My computer recently had an error with the System 32 and will not open if I reformat, which means I lose everything on it. No problem, because I supported straight? It turns out that all my backups say they are corrupt. Do I just terrible luck, or is there a reason why none of my files works when I try to open them on another computer?

    Try the bugcheck on the ext hdd. Right click on the drive in 'my computer' > 'properties' > 'Tools' > click 'check now '.

    You can restart your pc and reconnect the ext hdd.

    Recuva Piriform is a free data recovery program.

    Google for more solutions

  • I went in lightroom today and it can't find my photos. I bought an external hard drive and copied some elements but did not cut their.  I did a back up on my external hard drive but didn't budge them. I did the simple troubleshooting and I

    I went in lightroom and can't find my photos. I lost the link before and did the right click to find and they have been found, but it's different.

    I bought an external hard drive and copied some elements but did not cut their.  I did a back up on my external hard drive, but even once did not move them. I did the simple troubleshooting and it doesn't work.  I'm trying to find the original by right clicking the? on the folder LR and once I find the file it tells me that Lightroom has this file already in the catalog - and I want to merge. I tried one and it disappeared or moved. Help!

    Use the file Explorer to see if the images are still in their original location. I suspect that move instead of copy them. This can happen if you drag you the.

    I found that it is best to use either right click on a file or folder name and select copy then right click on the drive-destination folder and select Paste or use keyboard shortcuts to copy and paste folder and files from one disk to another. The keyboard shortcuts are the CTRL + key C to copy and Ctrl + V to paste in the selected destination folder-drive.

  • Windows 7 does not recognize my external hard drive and it does not appear in Device Manager but not in disk management

    I'm trying to connect to my external hard drive, but the auto test failed
    and I know that the problem is not the cable or anything like this cause it works on other 2 computers
    It won't work on my laptop
    I tried many solutions but most of them that the hard disk appears in disk management

    and they change its trajectory

    but in my case that's not she appears only in management device that I tried to uninstall it but also did not work
    After that I did any suggestions? !

    Go to your computer manufacturer's support web site and search for the latest Windows 7 drivers for your specific model number.

    Download the drivers to a folder on your hard drive and install all of them, from the card mother/chipset drivers, LAN, Audio, USB, Graphics, SATA, Webcam, Etc., and so on.

    List of computer manufacturer support sites:
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
    Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    J W Stuart: http://www.pagestart.com

  • I broke my external hard drive and now it locked and disassembled?

    I just have a lot of questions here. After trying many things I found in a deeper hole.

    I use an external hard drive, it's a Seagate Backup Plus 1 TB external hard drive. It is formatted and partitioned, I did using the steps for me the Web of Seagate site, when I got it.

    I entered the hole, I'm right now because I had backup problems near the top of my photos of Lyve on my external drive. I think the reason why they would not return, it was because my drive was in offline mode in the "Status" section in Lyve, despite the fact that disk utility says the status of the disk is online. I researched and found out that this can happen if a.) the storage is full or b.) the wifi connection is bad or a connection is not available. When I opened my Seagate dashboard, I discovered that my drive was full, so I thought that was the reason. This made no sense to me because there was no way that I had somehow already packed 1 TB, I had saved only once and it is brand new. However, I deleted a ton of pictures I put in 'Lyve Import' and then allowed the trash. (I must have accidentally imported them several times, so the photos doubled several times or something because altogether they are 50 GB, 1 TB not...) That seemed to be the source because then my drive had 938 GB free!... But my drive was always in offline mode.

    So I refreshed, rebooted, unplugged and replugged, returned Wi - Fi works for Seagate Lyve and my computer. But my drive was still offline even though disk utility always says that it is online.

    Now, I'm still trying to find out why, it's that my drive has been appearing offline in Lyve when I used different Wi - Fi connections in different places and they all worked well, and I have lots of storage. One of the reasons is that the partition on my drive has still pictures of Lyve copied import, I had deleted, because there is almost no storage on this score somehow, I suspect. As you can see in the second photo, the score says he has only 16 MB of available space, and I somehow used GB 999. If it is the same as before, I don't know how to access this partition, and then delete them. It is a copy of all of these photos of Lyve Import? However...

    NOW, currently the main problem that prevents me from continuing to investigate on the previous question is: I had encrypted my external hard drive some time ago. After having annoyed having to enter a password long so many times because of the reopening and that to solve the problem 'offline', I've deciphered this hard drive clicking in the Finder by clicking Decrypt. I entered the password to do this, and have decrypted AFAIK because the password has been accepted. But now my drive says that it is locked and disassembled? What? It is shaded in the left sidebar of disk utility. It does not appear as a device plugged into the Finder. It's as if he is not yet here, but I can still access Lyve. From what I understand, my disc encryption would protect its ' content with a password. Decryption, it would mean that I wouldn't have to type a password to access? Seriously worried that I screwed to the top of something because I did not understand what the consequences would be here. In addition, why my player not appear when the score indicates the status of the disk is online?

    I have included pictures of both the disk and partition information, and what they look like now in disk utility. Previously, from what I remember, in the information section of my car he had about 948 GB available, was mounted and he said it was a logical Partition encrypted, if it is of no use. It does not display this information now because it is locked, correct? I did not delete anything?

    As you can tell, I didn't know what I was doing the same in the first place - and now, I'm stumped. Please bear with me on this because all of this formatting and partitioning, and editing and similar is confusing me, only knowledge I had performed since the steps provided in the forums or on Seagate and Lyve directions on their website. I really don't understand what that means anyway - I wasn't trying to screw around things just... Any help would be GREATLY appreciated.

    ^ Note that this is what my Finder looks like now despite the fact that my external hard drive is connected. He always used to display the full drive Center 'FAVORITES' and 'TAGS' as a device that is currently connected, with the option to display its "table of contents or eject it.

    Update - I managed to solve this problem using this forum:

    How decrypt external hard drive, so it can be re-partitioned

    Make it wiped my drive, but given that I had pictures about it as I have copies on my computer, which was not serious.

    Good luck to everyone

  • I have an external hard drive and the althogh sound in 'remove hardware safely', it is not listed in 'my computer '.

    I have a HDD external and well that his "safely remove hardware" that is not listed in 'my computer' the problem is I am backing up Paolo and if I can not find I can't do.

    When I go to the hardware / device mananger it is in "O" but I can not find drive O

    Can someone please help.

    This external hard drive works on other systems?

    The drive will appear in the top of the disk management window?  If so, look at the column layout, Type, file system and status.  The "file system" must be FAT or NTFS.  From your description, it appears that Windows does not recognize the partition as being to the format in a way that he can use.  You may need to delete the existing partition (attention: this will remove all files that may exist on the disk), and then create a new partition in FAT32 or NTFS format.  Advice to do this, right-click the disk, choose 'Help', then go to:
    -> How To disk management...-> manage the volumes of base-> Delete, Create, or Format.

    HTH,
    JW

  • I bought a 500 GB external hard drive and did a full system backup. Then he told me that I need a floppy disk? After backup system restore was complete. What?

    I had a scare last week and thought that my computer crashed.  In the end, everything was fine, but I decided I had to do a full backup of the system.  Bought 500 GB external hard drive.  Full backup of the system ran through the performance Wizard mode & maint.  When finished, he gave me a saying of the warning, something like "insert a diskette to run the system restore" something like that.  Does this mean that if I have a major failure which is on the external hard drive is null and avenue?  Floppy?  What is everything?

    The disk is a boot disk that is used to access the backup files.

    The following items may be worth a visit:

    Windows XP - back up your files
    http://www.Microsoft.com/windowsxp/using/Setup/maintain/backupFiles.mspx

    How to backup easily your entire system in Windows XP
    http://free-backup.info/how-to-easily-backup-your-entire-system-in-Windows-XP.html

    Windows XP Backup utility
    http://vlaurie.com/Computers2/articles/xpbackup.htm

    For a different backup method that will include all your
    programs, personal files and settings, you can
    consider buying imaging software.

    2011 disk Imaging Software comparative review of products
    http://disk-imaging-software-review.TopTenReviews.com/

    Paragon offers a free version that can be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Free backup & Recovery (Advanced) 2011
    http://www.Paragon-Software.com/home/BR-free/features.html
    (the name of the file to download is: br_free_advanced.msi)

Maybe you are looking for

  • Transfer contacts from iPhone to another iPhone

    Hi all I got very fast, good answers here before in my previous question, so I hope for another sterling effort today I have an iPhone brand new SE, that book of Contacts has been recently synchronized and damage the contacts filled my old dead 5 s t

  • Vs ThinkPad 65W adapter 90 w

    Hi all (I search for it but could not find an exact answer. So where this has been asked before, just tell me at this link and sorry). What is the difference between the charger 65W and 90W (if any?) It is better to spend the extra $55?

  • process ended unexpectedly

    try to install windows SP3 for XP Home, tried to install via windows update and installation by the network, the installation gets near the end where is starts updating the registry, she leaves installation gets this error message every time the proc

  • Password E4200 web utility

    Hi, it is possible to use a different password to access this web utility? For the moment, the access password is identical to the pre-shared key wifi!

  • Problem of Smartphones has 'battery' - but maybe OS - blackBerry

    Well, like many people, I have a problem with my Bold 9900 battery seeming to lose his load when it gets to about 50%. Suddenly, the phone starts to Flash and the battery icon goes red. Review of that State, the software shows the battery is 8%. He d