Learn how to run labview vi on fpga target

Similar Questions

• How to run a Show Desktop.scf in Labview?

  Hi all

  Can someone tell me how to run a Show Desktop.scf in labview?

  Kind regards

  Shakur

  Dear GerdW

  Finally, I made this VI with a method... Let me know if any other better way is there... I m attaching VI... Look at him...

  Kind regards

  Shakur

• How do I run Labview applications into a tablet with android os

  How to run the Labview application in the tablet with android operating system?

  Can we use Labview mobile module or use the google game for labVIEW data dashboard? How to install in the PC?

  If you had looked at the dashboard of data and some other links on Android, you will see that you can not run a LabVIEW on Android application. Nor can use you a serial port. With data dashboard, you have a pc that runs LabVIEW and publishes to shared network variables. The Android data dashboard allows you to see these variables.

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• problem running example project USRP FPGA connected via Ethernet

  Hello

  I am trying to run the example project of USRP FPGA on a USRP-2940R connected to a PC windows using Ethernet. I have not made any changes to the FPGA VI or screw host and I'm tryign to run the host Rx in Streaming, VI. I get the error-63180 function Open Bitfile dynamic reference (called from the VI open device), with a possible reason for "the specified resource name is a reserved word or an invalid alias. Alias of RIO can only contain alphanumeric characters, '-' and '_ '. I specified an IP (192.168.10.2) for entry of address of device to function. I guess the address of the device is the problem. This who should I be specifying the address of device in this case. Any help would be greatly appreciated.

  Jerry

  jerrysydir wrote:

  The restriction you mentioned is specific to the USRP platform? The website NOR talk using Labview FPGA with a RIO Ethernet expansion chassis.  (http://www.ni.com/tutorial/11703/en/).

  LabVIEW FPGA on Ethernet is only available through LabVIEW RT. Behind the scenes of the target is still connected to the well RT via PCIe controller and then the RT controller is connected to the host via Ethernet. There are also some USB LabVIEW FPGA targets (http://www.ni.com/white-paper/14821/en/).

  For the RIO USRP, MXIe is currently the only bus taken in charge for LabVIEW FPGA.

• Run LabVIEW executable in Windows 7

  Can I run an executable of Labview created with Labview 8.6(32-bit) in windows 7 or Vista. If this can be done then how? I tried to copy the lvrt.dll (runtime engine) in the system 32 folder, but it is not solved my problem. FYI, my Labview exe file also include the fuzzy logic toolkit.

  Hope someone will help me. Thank you.

  Lojius.

  Refer to http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/ps/30/sn/catnav: of, n12:, n13:r. /c0 >, motor run LabVIEW 8.6 only supports Vista.

  If you are using WIndows 7, you use LabVIEW 2009.

• Run LabVIEW vi - steps stage construction simple comparison

  I watched both 'Building run LabVIEW VI steps of a model' and 'Create Plug - Ins to with LabView SignalExpress', but they don't tell me what to do about errors in the process.

  I am trying to create a step of the user of the Less.VI.  Because it's a 'polymorphic vi', I find that I need to 'create a forum '.  There is no explanation of this expression is found, so I created a new white VI and inserted Less.vi.  Another State of instructions as the inputs and outputs must be connected to the terminals of the VI.  However, this VI has no object of front panel and I can't find any instructions on how to connect a terminal to the block diagram display.

  When I go through the procedure in "creating SignalExpress Plug-Ins with LabView", I always get a Bachelor's degree in LAW with a VI that will not open, when I try to insert using a LabVIEW 8.6 VI step adds - run a LabVIEW VI - run (since I created the source distribution in LabVIEW 8.6).

  I checked that I removed exclusion for user.vi and instr.vi in the Instructions to build.

  This 'easy' with LabVIEW SignalExpress interchangeability is what I most need.  The document "Creating."... "isn't really a tutorial because it does not pass by one example.

  Someone please help which created and transferred a user step in LabView - one with no object of façade?

  Hi wildcatherder,

  The Less.vi is not a normal VI, but is rather a function.  However, you can create a VI of this.  To create a connection in the pane of a VI connector and you must go to the front where you have your desired entry and commands and output indicators ("for the Less.vi, you can create these simply by double-clicking on the terminals of the function on the block diagram and selecting Create" "indicator or Create ' control).  In the upper right corner of the front panel, there will be the VI icon.  If you right-click this, you can select display connector.  This should display the connector pane.  When you click on a terminal in the connector pane, your cursor should turn on a coil of wire.  By clicking on a command or the indicator after that, you connect an object to front panel to the terminal you selected.  You can find more information on this here.  Go to the section called "Building the connector pane."

• Run code on the host target RT and FPGA

  Hi all

  I'm sorry if I ask a question to repeat. I searched for this a bit and couldn't find a solution.

  I'm trying to run a single VI (be it on RT compactRIO or on the connected host PC) and enforce the code on the host PC and target the FPGA code RT. I currently code that runs on the host PC computer that opens the FPGA reference and executes code FPGA, but I don't know how to do this with a VI on the target of RT. Any advice/help would be great. Thank you!

  Brandon

  You are not far from your goal. But you need to at least

  1. Update FPGA code (Bitfile) containing your code to run on the FPGA.
  2. An executable compiled for your goal of RT, which is set to autostart.
     You can use the code from my first post as a starting point. Compile, deploy and set it to autostart on your target of RT.
  3. An executable compiled for the host machine. that your user will begin.
     You can use the code in my first post, maybe load IP address, Port etc. of the Ini file settings.

  If you double-click on the exe file on your host computer it will open an application reference to your target computer of RT and call the VI on the target machine. This is how you run code on your RT. From this RT code you can download and run the FPGA (bitfile) to your FPGA code or control which is already running the FPGA by controlling a state machine code. Load more screws to your memory of RT targets and call them from your host to add more functionality if you need to.

• How to replace Labview RT10.0 with RT8.2 on the remote system?

  LabVIEW RT10.0 is installed on our new PXI-e8133 controller. Our host is running Labview RT8.2. That's why I'm unable to download and run a VI from the host to the remote system.

  I want to download RT8.2 between the host and the target (so replacing/removing RT10.0 on the remote system). On another controller, we could choose the 'old' RT8.2 by download to MAX (which replaces the latest version). This is not an option with the new controller. Add/Remove software MAX, available versions of RT on the host is 'none' (even if RT8.2 is listed under the software on my system).

  How to install RT8.2 on the remote system? I have to completely remove RT10.0 first of the remote system?

  Thank you!

  Unfortunately, the minimum Version of the compatible LabVIEW RT for the PXI-e 8133 is 2010. This means that you must either upgrade to LV2010 or choose another controller.

  Kind regards

  David Ashlocke

  Technical sales engineer

  National Instruments

• status of the computer to run LabVIEW 8.6 remote façade

  Hello

  Is there any specific computer to run LabVIEW 8.6 remote panel?

  It's same as LabVIEW 8.6 run?

  Or I just need Internet access? how fast the Internet is to ensure the quality of the programming? Any fine version of web brouser? where could I find info relavent?

  Thank you!

  Cynitha

  The client computer would need the engine to run LabVIEW. The conditions for this are detailed in the LabVIEW 8.6 Release Notes. With regard to the 'speed' internet should be - that depends entirely on the amount of information that is sent. This KB article details some of the browser requirements.

• How to stop DMA FIFO on FPGA?

  Hello

  can someone tell me how to stop Fifos DMA as a target host on the level of FPGA FIFO?

  The node of the method 'stop Fifo' host only erases the fifo buffer on the host side. The Fpga FIFO is still running.

  To reset the whole fpga is not possible, because the running code is important for control of the measure.

  Thank you very much

  Hi b.,.

  you might stop to write in the FIFO with a Boolean control connected to a structure of matter...

• I need to learn how to remove trojan my computer files and the registry.

  Original title: cleaning your pc

  I need to learn how to remove trojan my computer files and the registry. There is a financial has now attached ittibu or something. and how to remove the event source errors and all that is connected to this.

  If you make financial transactions online and feel your system has been compromised, the more experienced people will recommend wipe you your HARD drive and reinstall your XP from scratch, but that is not always possible and of course is up to you depending on how you feel about this (you need to feel good about it).

  If you still think your system may be achieved a malware, I would do these things before you start any troubleshooting effort:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Download and run Hitman Pro here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:

  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Download and run TDSSKiller from Kaspersky:
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  The scans by operating clean, then to solve any problems.

  If you still think that you have any questions, then proceed as follows:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you need help interpreting your logs in Event Viewer, follow these steps:

  Here is a method to display specific information about individual events.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

• How to run windows (vista, 7), during the night, or during any period of time and do not have to worry it restart itself.

  Windows Update will restart when the changes are applied.  I understand why.  However, when I do not use windows, which is relatively rare, and the specific task, I often run long processes.  Windows will reboot the machine by force regardless of what I'm doing at the time.  I guess if you are electronic control or Watch youtube, its not that big of a deal, but when it stops at Midway for a night process, its quite frustrating.

  I had turned off the windows update service, so I guess that takes care of things, or is there another process that verifies that the windows update is running and restarts it?  Thoughts?  Even if restarting is intentional, the fact that a modern operating system will turn off when it receives a message from the mother ship is quite disturbing (beat tone comes from the fact that I'm a nerd of linux.  Sorry).

  Hello

  Check in scheduled tasks and also like antivirus programs that can update themselves
  and sometimes require a restart.

  Learn how to create a scheduled task leads to the understanding of those that have been created.

  How create a task in Vista Task Scheduler (apply as well to Win 7)
  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  =============================

  If something stops Windows:

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to run the form without "Forms Builder"?

  Hello

  Forms [32 bit] Version 6.0.8.11.3 (Production)

  How to run a form and connect to a specific database without logging in the form designer?

  I developed an application (a bunch of forms), and I want to first run the 'login' page and connect to my database.

  I think I should create a batch file, but I do not know what command should I it right?

  Thank you

  I found it thank you.

  module ifrun60 = D:\login.fmx userid=scott/tiger@oracle

  -where can I find the "ifrun60" in the documentation, or anywhere to learn about it?

• Learn how mirrow my ipad on my laptop?

  Learn how mirrow my ipad on my laptop?

  You cannot be mirrored, (or mirrow them)