Leaving the Remote Desktop application, the host closes all applications

Similar Questions

• I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  Keep the computer plugged in whenever possible.

  If you keep the computer always connected, make sure that at least twice a month

  Run it on battery until battery charge level falls to about 40-50%.

  Please don't completely discharge the battery. Discharge the battery completely will reduce wear and tear on the battery.

  For more information:

  Section: To optimize the battery life

  http://support.Apple.com/en-us/HT204054

  Citing at the bottom of the linked article.

  "The question is often asked:" should I disconnect my laptop from the mains when not in service? Under normal circumstances it should not be necessary because as soon as the lithium-ion battery is full, a properly functioning charger will stop the load and load the pad will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe. »

  http://BatteryUniversity.com/learn/article/bu_808c_what_the_user_can_do

• He done wrong to leave the USB cable all the time?

  To clarify, I like this feature of bedside or desktop clock where you tilt the phone L shaped and clock lights up.

  However, I know with other phones, if you leave the USB cable all the time, this is not good for the battery.

  What is the case with the backflip? I guess because Motorola announce this clock function, it's OK to do so.

  DansDroid wrote:
  

  jack58 wrote:

  To clarify, I like this feature of bedside or desktop clock where you tilt the phone L shaped and clock lights up.

  However, I know with other phones, if you leave the USB cable all the time, this is not good for the battery.

  What is the case with the backflip? I guess because Motorola announce this clock function, it's OK to do so.

  It will not harm the phone, it's the same as if you left your phone connected to your A/C charger.   Once it's charged, it no longer attempts to charge the battery.    --- Dan
  

  Thanks for the reply. I should have clicked the 'right answer' not the answer 'useful '.

  I now have the phone plugged in USB a/c or all day as a desk clock and so I can see alerts when they pop up and have no problems at all.

• I have Windows Live Mail in the House. Recentlly, that he was leaving the opening at all. I have windows7. He says maybe calendar error, or must change password or reset?

  I changed a password of e-mail through suddenlink.net at work

  I have windows live mail at home. Recentlly, that he was leaving the opening at all. I have windows7. He says maybe calendar error, or must change password or reset? What.

  Hello

  The question you have posted is related to Windows Live, so it would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Mail Forum
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

• Unable to the virtual machine to a remote desktop another PC host then.

  I recently installed VMWare workstation and created a virtual machine that I can't access via RDP from any machine other then the host.

  I am able to access internet from the virtual computer hosted together with the machine to do hosting.

  IP OF THE VIRTUAL MACHINE

  192.168.245.128 ip

  Vmnet8 host machine

  192.168.245.1

  vnet1

  192.168.126.1

  eth0

  192.168.2.3

  I understand that the vm and the host can communicate because they are both on the reseau.245.x, but how do I get the VM to get an IP address from my dhcp server so that I can rdp to VM?

  I would be grateful for any assistance with this issue.

  Lost in the sauce.

  B

  At this point how to configure a network adapter on the virtual computer to get an IP address for an existing dhcp server?

  To gain a better understanding of the VMware Virtual Infrastructure of network I strongly suggest you read 14 chapters (setting up a virtual network) & 15 (advanced virtual networking) in the Manual of the workstation user , still less the rest of the documentation. (Also available in the help file of VMware Workstation).

  Then change the virtual computer's network adapter to use connected by a bridge.

• The tab 'fonts' & 'file' in the creative cloud window shows only a wheel of continuous rotation. Even after leaving the window open all night, he showed nothing. I went in the OOBE folder and tried to remove the button Delete the opm.db file, but it i

  I was never able to access these features in the window of creative cloud. I tried to access the OOBE folder to remove the file from opm.db to . There is no file opm.db. I followed the advice from another thread and delete the contents of the OOBE folder. This did not solve my problem. I left the window of creative cloud open for a whole day hoping that would solve the problem. He did not. Thanks for any help you can provide this issue.

  Thomasc11484006 have you tried to run the uninstall program Adobe Creative Cloud desktop application and then put it back?  Instructions and the uninstall program can be found at code error 2 or 50: Creative Cloud desktop application update doesn't have.  You can then reinstall the application using the steps listed in download and install Adobe Creative cloud appscreative cloud.  We invite you to update this discussion if you have any questions about the steps that are listed in each document.

• With multi tabs open I'm going to close Firefox 5.0 and it will not keep the tabs closes all tabs

  With multi tabs open I'm going to close Firefox 5.0 and it will not keep the tabs it closes all tabs so when I restart I have to reopen the tabs. I was using firefox 3.6 and had the opportunity to close, but keep the tabs so they would open when I restarted firefox.

  upgrade your browser Firefox 8 and check

  • getfirefox.com

• Leave the mouse works all of a sudden

  Original title: mouse problem

  Hello

  Today, my mouse works fairly suddenly.  I had not installed a new software or hardware which could have come into conflict with the mouse.  In addition, I tested in the other USB ports on my computer nothing works.  The mouse works on our family another computer, is not that the mouse is broken.  Other USB devices on my computer work always correctly, so I am at a loss as to why the mouse leave so suddenly. In addition, it seems that the system restore lacks the previous points can I restore, while the option is out.

  Do that, does not work.  I noticed that I have a Code 43 error in Device Manager now if that helps at all.  I tried to reinstall my chipset also for USB drivers, but that did not help either.

  {edit} I managed to solve the problem.  It seems that my 1394 port was interfering with my ports USB in a certain way.  I tried uninstalling the driver for that and restart and now the mouse works fine.  Thank you very much for your help!

• Version of the host of all hosts in a Cluster or a vCenter

  Hi guys,.

  Our environment has got more than one host to multiple clusters. I'm trying to get a report include a list of host names in a cluster or a vCenter server & ESXi version of each host.

  Could you please suggest me the best way to get that report either via vSphere client of power CLI command

  Kind regards

  Hello

  with PowerCLI, this is a simple call:

  Get-VMHost | Select Parent,Name,Version,Build
  

  Tim

• Screen of remote desktop: fonts and icons of the remote desktop window are so small

  I try to connect via Office server2012 windows remotely.

  The remote computer is a Server Terminal server where at least 240 users are connected.

  The fonts and icons of the remote desktop window are so small, all other users who are connected to the same server have no problem with the font size or the size of the window. everything seems normal

  But when I connect remotely, the size of the window and the police are so small. I can't use any application on remote because of the size of the font.

  Please suggest...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• can I leave the laptop battery connected to ca all the time?

  I leave the battery plugged all time ogical?

  If you leave the power adapter plugged with the laptop turned off, it will draw a very small load of maintenance with the adapter, not enough to cause any damage. Electricity requires a complete circuit and if the laptop is not attracting a lot of power, the adapter does not work hard. This logic we would unplug a desktop computer, even when the computer is turned off, so the internal power supply would last longer. Not necessary, and no one does.

• Dedicated network adapter to the virtual machine and the host computer not let can visit his profile

  OK, here's my question, I know how to give themselves a phyiscal nic to a vmware, but I wanted to take it one step further and do not leave the host send or receive data from this network card, only the virtual machine can use this network/NIC...

  Here's my reasoning, I have to network conections, one is for my internal/field network and the second is a direct connection to the internet (Comcast) I don't want to use to separate the machines have for internet connection, I want to be on the same machine phyiscal and have just the vmware machine talking to comcast... is it possible?  I am running VMware workstation 7, last update.

  Thank you

  Cdrshm

  I assume you are using a Windows host?

  If Yes...

  -first set up networking networking with vmnetcfg.exe

  -assign vmnet0 to the network card for the internal network

  -assign vmnet2 to the network card used for direct access to the internet

  -Right-click on the map network-icon in the systray and access the properties of the network adapter for vmnet2

  -Disable all other protocols and the Protocol of vmware_bridge for this network adapter

  result: a virtual machine that uses vmnet2 can directly access the internet and the host has no IP address for this network adapter - and therefore cannot use it.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Move the host / VM and Clusterconfiguration to an another VC

  Hello

  Here's the situation:

  I have 2 data centers (physical rooms) in the main Department of the city one and the other a smaller Department in city b. Two data centers have environment VSphere and a VSphere server... now we want to consolidate this... which means I want to turn off the server vsphere small in b City Department. How can I transfer the configuration full vsphere (for example, the cluster hosts and vm) on the server 'big' vsphere in the Department's main city a. city and b are related to transparent LAN...

  Welcome them

  Assuming you leave the hosts side B of the B site, you could just create a Cluster in the center of destination data and existing copy of the page by page the cluster configuration.

  Once you have done this, you should be able to remove the side hosts B and add them to the new cluster on the a-side.  The VMS should not to b off the power.

  -MattG

  If you find this information useful, please give points to "correct" or "useful".

• Install HA agent on ESXi 3.5u3 failed: ' year error occurred when setting up the HA agent on the host ".

  Hello!

  I of the improperly installed HA agent via vCenter to clean newly installed ESXi 3.5u3. It occurs in about 60% of the process 'Reconfigure for VMware HA': ' year error occurred when setting up the HA agent on the host ". Remote syslogI now have:

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.412 "TaskManager" 49156 info created task: haTask-ha-host - vim.host.NetworkSystem.refresh - 237

  Jan 14 14:19:56 80.251.112.51 spend: 2009-01-14 11:18:44.412 "NetworkProvider" 49156 info update the configuration of the entire network...

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.425 "NetworkProvider" 49156 information updated configuration of the entire network.

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.425 "TaskManager" 49156 info task completed: haTask-ha-host - vim.host.NetworkSystem.refresh - 237

  and no warnings or errors.

  In the list of features HA doesn't speak on the use of HA between the hosts, its all about the components within a single host HA capabilities.  You can cluster VMs on different hosts to VM HA, but not VMware ESXi HA

• Where the option close multiple tabs? It has been a right-click in the function 'list all tabs '. Now it's gone!

  Well although I figured out how to get the toolbar tab back where it should, at the bottom where easy access to him, but now I see that the option "Close all other tabs" that was in the right click menu of the arrow 'List all tabs' has disappeared.

  Is there anyway to get that back? This design change is really not as good as 3.5. Also say that that person can slow down. Who can understand what it says?

  Thank you!

  In Firefox 4, the tab bar is a regular toolbar and which causes the toolbar context menu show if you right-click.

  You can right click on the tab that you want to keep to "close other tabs".