LED flashes code 1

Similar Questions

• Precision M4400 POST diagnostic LED flash codes

  An Precision M4400 don't POST.  After a few seconds the NumLock, CapsLock and ScrollLock LEDs all blink.

  Page contains a link to the page but this link is not correct.  Codes flash Latitude page describes the storage LED, battery LED and wireless LED blinking, but on the Precision M4400 all lights are off and the flashing of the LEDs is NumLock, CapsLock, and scroll stop.

  On systems older like this, when all three (num/caps/scroll) flash (aka Christmas tree syndrome), the motherboard is bad.

  Bay-Wolf.com/portpostcodes.htm

• Pavilion dv6-3130us: LED flashes Code help

  Hello

  I need help dignosing a code flashing for my model, the error code is flashing (if necessary)

  I've seen on other pages of HP diagnosis that means that the CPU is dead but I took it apart it reinstalled and it starts fine, but after a full stop and left at night the symptoms came back.

  This sounds like a defective processor?

  and where can I find a list of error code specific for my model?

  Thank you.

  The following is for your laptop and other.

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/4247579/model/4308444/document/c01732674/

• Power moves from AC to battery at random, with a strange LED flashes code

  Hi all

  From time to time, on a regular basis, I'll have my laptop go battery power even if it is plugged.  When it does this, the led power and battery charge flashing start.  This happens usually after the laptop has been for a little while, but sometimes it will start to do so as soon as I turn it on.  Often, I can run just after that I have unplug the power adapter and plug it back, although it generally takes a few tries, and it is usually only a temporary fix.

  Really, I just want to know what it means when the two leds blink.  I could not find this combination in textbooks or anywhere online.

  I have a HP Pavilion dv8000 (dv8310us) Windows XP.

  I appreciate the ideas.

  Yes, I think he fixed it.

  I went and bought a new universal power adapter a few days ago and the problem has occurred again since then.

  In fact, it happened once the first time I used it, but it turns out I had the adapter put half a volt too low.  So I think the power, and load it LED two flashing simply means that the adapter does not have enough power, meaning mine was indeed that went wrong.

• BlackBerry Z10 Z10 led flashing and the software update error code

  Hi, forst time poster and beginner, so please be nice!

  I got a Z10 for three months and today, I could not turn it on and light flashes 1-3-1 sequence.  I plugged on Blackberry link to perform a restore, and I now get an error on Blackberry link code: cannot repair because of the error: BDSLSV2RequestURL.  Any thoughts?  My carrier wants to remove it for repair, but if I can fix it, I would be happier.

  Thanks a lot for your help!

  Chris

  I think that LED Flash 1-3 is a bad battery...

• LED flashing - need to know the Satellite Pro 6100 POST error codes

  When I tried to turn on my Satellite Pro 6100 laptop the Green DC in power light turned orange and started to blink.
  It flashes 5 times, then 3 times then repeats.

  I guess that this indicates a failure in the system, but where can I find what means this error code?

  Hello

  You can read the flashing code very easily short flashing means 0 long average 1.
  Then you read the complete code back.

  Finally, the error code must be converted into HEXADECIMAL value and then a technician of the laptop could know what means this value.

  The ASP in your country should provide details of the mentioned error.

  Welcome them

• Satellite Pro M10 cannot start properly - AC LED flashing orange

  Hello

  I have a weird problem that I can't solve.

  (1) when my Satellite Pro M10 the plugged AC adapter and the battery, the AC led is green and battery led is orange.
  (2) when I try to turn it on, several times it not light and the dissepear of leds for 1 or 2 seconds and my AC led flashes orange. Sometimes it lights up as it should be.
  _________
  When this problem occurs, it will take a lot of time before it turns normally. I searched the internet for a solution, but I couldn't find one.

  I already removed the battery and try to turn it on, but it does not solve the problem. Or when I remove the AC adapter and try to start it on the battery itself.

  I also removed the two of them and you press the button power on for 60 seconds. After that, it will sometimes start with mains or battery adapter.

  My bios is updated to the latest version. (I've done this when he started only five minutes ago, but the problem is not resolved). I also believe that when the m10 is enabled and when I close it, it crashes also.

  Do anyone know how to solve the poblem? Thanks in advance.

  Hello

  These problems are very rare and shouldn't t happen if hardware or software is ok.
  Power LED blinking orange means there could be a hardware malfunction.
  It is a code flashing microphone and a technician can be read.
  This code must be translated into the hexadecimal digit.

  But for ordinary users it s not able to know what it means. In my opinion a power electronic malfunctions and must be verified by an ASP.

• Satellite Pro 6100 shows flashes code 73 h

  Hello

  I have a SP6100 where only power led flashes.

  I think the code is long - long - short - short - long - long - long - short that represents 73 h I think.

  The picture says

  PPV voltage is not less than 0.68V when the computer is turned off.

  But does that mean? As I'm German I can't really say if this means that the motherboard is broken or if it's something more easy to repair.

  Could someone help me please?

  Best regards
  Matthias

  > I think the code is long - long - short - short - long - long - long - short that represents 73 h I think.
  You are right; It s 73H

  Means of long short 1: 0
  So the code is: 1100 1110
  Due to the least significant bit, must read this by behind; means: 0011 0111
  0111 0011 = 73 H

  However, these codes mean more often that it found a motherboard problem
  I don't think that the replacement motherboard might help you

  But the motherboard is expensive and in my opinion, is not worth a remedy on this oldie...

• Satellite Pro 6100: LED flashes at a certain frequency

  Mentioned this problem in another article

  Power adapter gives green LED and charge the battery. So far so good, but...
  After pressing the button ON / OFF, nothing happens. Do not use is not the main adapter but the battery gives no change.
  Only the DC IN - LED flashes at a certain frequency:
  short-long-short-Short-Short-Short-short-long,
  Morse code:.-... -.
  in BIN: 01000001

  Nothing happens... Sytem stays down

  I bought a new battery but no change.

  What can be wrong?

  Manusje

  The blink code is displayed if there is something wrong with the hardware.
  Code: 0100 0001 should read it back 1000 0010 = 82 h

  The Toshiba service partner should know what is the meaning by mistake 82 h
  You should ask him for help.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12799&MessageID=46635

• Tecra 9000 - DC led flashing light 01001110

  I have a problem with my laptop, it's a Tecra 9000. When I press the button start power
  Tour LED from yellow to orange. Then the LED flashes 8 times. SLSSLLLS = 01001110. Peut
  can you tell me what this error code means?

  Thank you for all your answers

  Post edited by: fanatic

  I solved the problem by connecting the 2 PCBS together.

• Tecra 9100 don't start - power suplly LED flashes

  Hi all.

  I have a problem with a laptop Tecra 9100. When I push the button start the suplly power LED flashes orange for eight times to make a quick stop in flash 2 and flash 8. Can someone explain to me this error code is this?

  Thank you for all your answers

  Hello

  If electronic power supply detects that some portable problem send a blink code. This code allows you to identify the problem. I can't tell you much these codes, but what I know for sure, is that you need professional help.

  Please contact the service allowed in your country and explain the problem that you have.

• Pavilion g6 - B7D20UA #ABA: LEDs blink code... 7 times?

  First of all, I know that when the problem started.  It was the day after I bought it, and it was abandoned on floor 3 ft.  I tried to use an external monitor, changed the LED screen, "well-known work" ram and hard drive and reset all connections, nothing helps.

  The main issue I have is that all I get trying to start is a trouble of 7 flashes code.  Everyone that I have never heard talk of an HP flashes 7 times.  As you can imagine, I told more than 10 times with the same result.

  This laptop is salvagable?

  Johnmuir wrote:
  Yes, I changed the screen, which changes nothing. I had the same code flashing before and after.
  The LED caps lock flashes 7 times.

  Have you tried flashing codes here? Looks like a motherboard failure... ???

  HP BIOS Beep Codes
  Computer does not start and emits a LED or beep Code

• HP Jet 11: 11 flow does not illuminate. Power led flashes 3 x

  I am trying to fix a 11 HP flow for someone and I'm running into some issues here.  Basically, the computer does not light and the power led blinks three times.  I did all the options to reset that I could find online, and the power brick works.  The person said that she may have fallen, so I think this has something to do with that don't turn only not on.  No idea what the three blinking lights could mean in this case?  Thank you.

  Hello

  Flashing codes mean.

  1 blink = CPU does not

  2 flashes

  -L' laptop can load if given enough time.

  -If the laptop starts to load, try to start the BIOS of several times the ESC key until the Start Menu appears. Press the F10 key to enter in BIOS

  > Started the laptop?

  -Yes. The laptop started

  -No, the laptop is not started. At the moment, it seems that the BIOS is damaged.

  3 flashes = Module of Ram error

  4 flashes = failure of the graphics card

  5 flashes = hardware failure

  6 flashes = BIOS authentication failure

  I hope this helps.

• Pavilion Dv6 3138 Sh: Pavilion DV6 3138 Sh Led flashes, screen black

  Hello!

  I have a HP PAvilion DV6 3138 sh for laptop. I turned off in Sunday night and Monday morning I couldn't turn.

  Black screen and Caps lock flashes, but I don't know how many times.

  Can you help me what is the problem? CPU, Vga etc. The HDD Led lights up orange continuously.

  I tried the hard reset, but nothing has changed.

  The laptop is 5 years old.

  Here's a video about the problem.

  https://www.YouTube.com/watch?v=-kvcn7WsCt4

  Thank you!

  Hello @Peter800121,

  Thanks for the quick response!

  That is right.  This type of Flash code indicates a problem with the central unit.  You can contact the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  I hope this helps.

  Kind regards!

• Power supply question - amber LED flashing - Dimension E520

  So, I'm working on the dust removal and re - install windows on a machine. I've done dusting, but now I have problems with a LED flashes orange. The system will not top all - fuel without fans or beeps.

  After looking through some posts for ideas, I think it is a bad power supply or a problem with the heat sink.

  I think power because this seems to be a common problem. How can I test the existing? Is there a way to fire unless it is connected to the motherboard?

  The reason why I am wary of the heatsink is that I removed it when I was doing the dusting. I had the intention of fire tonight and get a new thermal paste in the coming days. Since then, I have read that this could be a recipe for frying the total CPU and I wonder if the machine is not pulled up like a check for free preservation any.

  It detects if I removed the heatsink? If it's happening, it will automatically detect when the new thermal paste is in there? Or is there a reset procedure any?

  Any help would be great. Thank you!

  As a side note, the design of this box is poor. I can't find some way to dust effectively the heatsink without removing it from the central unit. Supply openings do not match, so you cannot blow a good flow of air through the box.

  chelseasounder

  A flashing orange switch LED means that the computer is under voltage, but a power problem internal may exist.

  This may indicate a bad diet

  Are the Diagnostic LEDs on the front panel lite?

  The diagnosis Codes are HERE. NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Have you checked that all the cables to the motherboard and the disks are properly connected, by disconnecting and then reconnecting them?

  Bev.