Led flashing light charging port

Similar Questions

• Tecra 9000 - DC led flashing light 01001110

  I have a problem with my laptop, it's a Tecra 9000. When I press the button start power
  Tour LED from yellow to orange. Then the LED flashes 8 times. SLSSLLLS = 01001110. Peut
  can you tell me what this error code means?

  Thank you for all your answers

  Post edited by: fanatic

  I solved the problem by connecting the 2 PCBS together.

• Laptop has 'charge battery' led flashing with charger connected, but does not turn

  I am with the following problem:

  (1) my laptop won't turn. Even when it is connected to the charger. I tested 3 different Chargers work.

  (2) sometimes the light which indicates "charger plugged" does not illuminate. And when it turns on, the "battery charge" stops flashing. In this case, when I try to power on my laptop, it starts to launch upward, but in a few seconds, he turned down.

  It's a DV4-2160us.

  What could happen and what could I do?

  I have the same problem, I have a solution , however: the order of output power: first plug in the socket and then into the laptop, works fine for me if I have no batery, if I, it dose n t of material order, it could be useful

• Tecra 8100 - led flashing light

  LED on my Tecra 8100 6 flashes, then turns off then 2. I used this morning on battery until he died and then plugged in, no battery light is lit and used to power up. Anyone has any idea what it could be?

  Thank you

  Hello

  I can give you just that suggestion:
  try to remove the memory modules or just trade. Putting a module in a different location and/or a test module in both slots.

  If your machine has a serious hardware problem and should be checked by a technician...

  See you soon

• Remains of problem: computer battery laptop battery 100% all the time (not connected), the LED flashing light?

  My laptop is HP Probook s 4430 (product number: QJ670AV). I just bought it for 4 months. Last night when I finished my work and I stopped him then I plugged the adapter to recharge. This morning I woke up and found that next to the Jack to the battery charge flashes constantly (in red). Normally, it turns red when it is plugged and becomes white when the battery is going to be full and stop when not plugged in. Now I use my laptop (without charging) for 2 hours and the battery icon on the screen said: "100%". What is the problem? I'm so worried. Please help me. Thanks to you all!

  Hello Lavender148,

  Your laptop is not unload.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

  Nice day.

• AT200 led flash does not work after upgrade ICS

  Hello!

  I know not why, but after the upgrade to ICS, I realize that the rear camera led flash lights.

  Anyone have this problem?

  Thank you!

  Hello

  Have you tried to reset the AT200?
  Do this

  Check the updates of the Service Station once more
  Someone posted a new update available

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• Satellite Pro M10 cannot start properly - AC LED flashing orange

  Hello

  I have a weird problem that I can't solve.

  (1) when my Satellite Pro M10 the plugged AC adapter and the battery, the AC led is green and battery led is orange.
  (2) when I try to turn it on, several times it not light and the dissepear of leds for 1 or 2 seconds and my AC led flashes orange. Sometimes it lights up as it should be.
  _________
  When this problem occurs, it will take a lot of time before it turns normally. I searched the internet for a solution, but I couldn't find one.

  I already removed the battery and try to turn it on, but it does not solve the problem. Or when I remove the AC adapter and try to start it on the battery itself.

  I also removed the two of them and you press the button power on for 60 seconds. After that, it will sometimes start with mains or battery adapter.

  My bios is updated to the latest version. (I've done this when he started only five minutes ago, but the problem is not resolved). I also believe that when the m10 is enabled and when I close it, it crashes also.

  Do anyone know how to solve the poblem? Thanks in advance.

  Hello

  These problems are very rare and shouldn't t happen if hardware or software is ok.
  Power LED blinking orange means there could be a hardware malfunction.
  It is a code flashing microphone and a technician can be read.
  This code must be translated into the hexadecimal digit.

  But for ordinary users it s not able to know what it means. In my opinion a power electronic malfunctions and must be verified by an ASP.

• Satellite A500 - HDD/ODD/eSATA flashing light

  HDD/ODD/eSATA flashing light

  This light flash all the time, or stay constant?

  Thank you

  Hello

  The HARD Drive LED flashes only if the HARD disk is running and working.
  It always means THAT HDD LED flash for writing and reading the data.

  Greetings

• Satellite Pro A100 - flashing light battery and no start

  Hello

  I was sitting watching a video with my daughter yesterday when five minutes in my Satellite Pro A100 suddenly stopped working - cut out completely and not be reactivated. When I tried to restart the orange lit battery eleven short blinks blinked, and nothing else has happened. The battery has been low for some time, so we always run the AC adapter. The adapter is currently connected, but there is no blue light charge as I expect.

  With the battery removed do not get the flashes orange. With the battery and power adapter, I get the flashes orange.

  I was wondering if the AC adapter was missing, and we do not have a "low battery" warning because we were watching a video. That would explain the lack of charge indicator. When we get the flashes orange, we get this from the small amount of residual charge of the battery.

  Can anyone back this idea up - or anyone who can interpret the error code?

  Thank you

  Keith

  Hey Buddy,

  This means that you are able to start your computer or battery or AC/DC adapter only, good point?

  Well, theoretically it might be possible that AC/DC adapter is defective.
  When you try to start your laptop, nothing happens, right?

  In the best case, you know a friend who has the same AC/DC adapter, so you can test if the AC adapter is defective or not. Otherwise a professional diagnosis of an ASP would be necessary.

• Satellite L500 is OFF and the Green LED flashes if hooked on sector

  Help!

  I have a L500 which is not outside the green light flashes when the power cable is plugged in, but does nothing else

  Hello

  What indicator do you mean exactly?

  DC (first on left) indicator lights up green when the properly feeding the power adapter. If the output voltage is abnormal or if breakdowns computers power indicator lights.

  The other indicator (power led second from left) lights green when the computer is turned on. If you turn off the computer to sleep, this LED starts blinking Orange.

  Also if there is a failure of memory Power LED repeatedly flashes
  0.5 sec and off 0.5 sec
  If there is a problem with the slot A the LED flashes two times orange then green once
  If there is an error in the B slot, the LED flashes orange green once then twice
  If there is error in the slot A and B the LED flashes two times in orange and green.

  But if the power light flashes green only, I guess there is a motherboard problem.

• Satellite Pro 6100: LED flashes at a certain frequency

  Mentioned this problem in another article

  Power adapter gives green LED and charge the battery. So far so good, but...
  After pressing the button ON / OFF, nothing happens. Do not use is not the main adapter but the battery gives no change.
  Only the DC IN - LED flashes at a certain frequency:
  short-long-short-Short-Short-Short-short-long,
  Morse code:.-... -.
  in BIN: 01000001

  Nothing happens... Sytem stays down

  I bought a new battery but no change.

  What can be wrong?

  Manusje

  The blink code is displayed if there is something wrong with the hardware.
  Code: 0100 0001 should read it back 1000 0010 = 82 h

  The Toshiba service partner should know what is the meaning by mistake 82 h
  You should ask him for help.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12799&MessageID=46635

• WANT 750se: USB charging port

  I have a HP 750-100se ENVY. The Office has 4 ports USB at the back and 4 top / front, a total of 4 ports USB 3.0 divided 50-50. USB 3.0, two albums identified by an SS has a Flash to identify it. It is my understanding that the "BOLD" lightning USB port can also serve as a fast charger for my mobile phone. I have a Samsung Galaxy S6, has the ability to use a fast charger. I used both the cable that came with my phone, and the other bought separately from Verizon, both are fast charge cables. Nor can charge my phone to anywhere near a normal cable, my phone says a full charge of 30% would take more than 4 hours.
  
  Is their no way to "activate" the bolt of lightning port USB is able to load quickly?

  BlueHawk172, welcome to the forum.

  All the information I found on the USB port with a bolt of lightning indicates that it can be used while the computer is turned off.  However, I have not found any information indicating it is a fast charge port.  It seems to load at normal speed.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite A10: Battery-LED flashes with AC

  Not too long ago I bought a new battery for my laptop. About a year and a half he worked well. But one day I just couldn't start Notepad without AC. I thought, just dead battery. If I set up the adapter sector, but the next time, the laptop didn't start either. With AC, no problem.
  So I charged the battery, and when Windows says, full battery, and the Green LED, I unplugged the AC. But then the computer laptop completely stopped, as if there is no battery.

  Now, it's this way: it is not serious what know Windows. The laptop does not start without AC. After a disconnect from the AC, the battery led flashes orange fastly. When windows is running, it only slowly blinks orange.

  Where is the problem? Anyone know a solution?

  Hello

  In my opinion, there are two possibilities.
  Either the battery is dead and needs to be replaced or to power portable electronic malfunctions.

  The first possibility is not serious because the battery change should help solve this problem, but if the power of electronic books is not working properly, the entire motherboard must be replaced.

  I think that it s advisable to contact the ASP in your country, because the guy has found the fault very quickly and could provide the best solution.

  Good luck buddy

• Satellite L40 - 15 G - LED flashes

  Hello, I have this problem, the toshiba satellite L40 - 15G, junt does not illuminate.

  I already remove it from memory and try the power up, nothing.

  I already measured AC adapter / DC, 19v is ok.

  pressing the power button with battery on adaptor taken 30 seconds and nothing.

  The only thing appens, led light, the power light green and orange battery light, appear, and the battery orange flashing with green led power light.

  I mean, seers green rest power one and the battery led flashes, I unplug the AC adapter, e reconnect and the 2 green led watch on and orange, in a few seconds, stars blinking the led battery led (orange) and rest like this and nothing of power up... help please.

  I already try universal adapter and nothing, in addition to this question... really helps.

  And nothing moves fans nothing, only the led lights.

  Can someone help, please.

  Greetings to you all

  Also on my side i have the power to change, and the back side of the Commission, have nothe pass as the power switch, if a press led ligh e stops, I'm talking about, I have everything ready dissamble boad ok, on my hand, I found this switches... what he for?

  And some one take the battery CMOS, in frist place I guess is not a problem, only the Don t of the bios, save the changes I did, plase can one help everything, everything...

  Find the testicles or, thank you!

  I can tell you with certainty what s wrong with your laptop, but I guess that its a serious problem of motherboard.
  Perhaps the electronic power supply on the motherboard is affected.

  Fact is that this isn't the battery problem. Why? Because the laptop should work without the battery, but comes to connect to the network.

  You said that the adapter is OK. Well, it means that the battery and AC adapter isn't the troublemaker you said that memory was also tested.
  So this isn't memory problem and, therefore, I think, it could be the related problem of motherboard.