Left click acts because several clicks it please help

HP pavailion p7 - 1126 s

64-bit edition Windows 7 Home premium

no errors/changes (other than to change the mouse and uninstall/reinstall of the drivers/software for the mouse).

When I make left clicks it clicks several times, most of the time that just double click. Click on 2 to 4 times a left click. And he has been doing worse, clicking more quickly and more often... Also, when I try to highlight something and release the left button of the mouse insteads click once or twice, unhighlighting the text. I do 5 or 6 times before getting the part highlighted. So I tried to uninstall and reinstall the software of mouse button 3 HP supplied with this system. After that it does not work, I brought out my old Logitech USB M100 mouse optical wired. I still have the same problems with it, so I know it isn't the mouse that is the problem, or I would just buy another. I had mice to break or wear out, but what a new to me. And yes I checked the control panel mouse settings entirely. And no, I did not set for one-click button to act as two clicks. And yes I checked every possible there double click speed setting. With this many road, all suggestions will be tested, with the results posted in the same day.

Recently borrowed a friends wireless mouse to solve the problems. And got the first fix of time (other that the two I tried before were older but still the optical/laser mouse). Was crazy how every time were either so worn that they had double clicks as a click (both also had drinks spilled on/round them which was a consider) left or the software was so old, it was beyond what microsoft or retailer could solve/bring answers to the. But when the borrowed mouse worked I knew immediately if we can do that... another could as well. Thus, after the conflict and download to re - download drivers for these mice. I now have this problem solved by 'just to buy a new one.' And Word to the wise to you ehoser, YES system restore is bad on your drive, I now have a name that I used (unfortunately) symbols with (as unique and the only name) as my main admin. login name and now all programs says it can not find this user and install anyway. (Had no idea he was going to do, it worked fine w / vista) and there is no way to change this, you can but its stored in the registry as what it was named and even tried to copy this ACCT. w / a new name provided it w / admin and had SERIOUS PROBLEMS w / who but not by doing another reinstall its bad ennough than its prob. corrupt my registry as unknown user etc. not to mention the damage that I have for it by reinstalling win 7 times. And as too remote ups come on, good work on your part for the USB key, a friend encouraged me to buy one saying "if its something you can't live without it, BACK IT UP! It was years ago, while they were the baby size 100-250 GB usb readers, I always clean. And again, using the same purpose.

Tags: HP Desktops

Similar Questions

  • AS3 click Tag - please help!

    I read on questions posted on click on tags and can not understand my problem.

    I have a dynamically loaded button 'myViewPackagesBtn '. The publication that I create this banner ads says that I need to create a "clickTAG" and do not have a hard-coded url and they ned to be able to track clicks.

    They said to use this code:

    on (release) {}

    getURL (clickTag, "_blank");

    }

    My AS3 code is as follows:

    myViewPackagesBtn.addEventListener (MouseEvent.MOUSE_UP, goSite1);

    function goSite1(evt:MouseEvent):void {}

    navigateToURL (new URLRequest ("http://phgoffers.com/participatingHotels.aspx?id=327 & src = 12113815"));

    }

    You please help me and let me know how to accomplish what they are asking for?
    Thank you!!!

    If they require you to use the AS2 code, you cannot use your AS3 code.  If you can use your AS3 code, then you need to replace the url with the variable "clickTAG"...

    myViewPackagesBtn.addEventListener (MouseEvent.MOUSE_UP, goSite1);

    function goSite1(evt:MouseEvent):void {}

    navigateToURL (new URLRequest (clickTag), "_blank");

    }

    To get the "clickTAG" variable assigned, you will probably need to study using FlashVars.  The value of "clickTAG" is generally attributed as part of the html code to embed the swf file in web page.  That allows anyone to change the link via the HTML rather than having to edit the swf file.  You can check with the person who wrote the rules for this.

  • get rid of Babylon and the research of delta, uninstall doesn't work because it is not, please help

    I want to keep my firefox but have retained this Babylon and delta research and no matter what I do, he won't

    Remove components of Babylon:

    Remove the toolbar (from Extensions)

    1. open Mozilla Firefox. Go to the menu button FF.

    2. Select Add ons & select Extensions. (delete the extra text)

    3. remove/disable the toolbar of Babylon 1.5.0.

    4. restart your browser.

    Remove the toolbar (from Add/Remove Programs)

    1. click on the Start button on your computer.

    2. Select Add ons & select Extensions. (delete the extra text)

    3. Select programs and features.

    4. Select Babylon toolbar in the list programs.

    5. right click Uninstall.

    6. Press Yes on the pop-up message.

    Delete search engine

    1. open Mozilla Firefox. Click on the search bar, located on the right side of your address bar

    2. press the F4 key and select Manage search engines in the drop-down menu that appears.

    3. Select search on the Web (Babylon) and click Remove.

    4. click OK to save your changes.

    Remove/change the homepage:

    5. open Mozilla Firefox. Click the FF menu button.

    6. Select Options.

    7. Select the general tab.

    8. in the section of the menu titled "Home Page", enter the URL of your desired Home Page.

    9. click OK to save the changes.

    Remove Babylon Search in new tab

    If when you open a new tab in Firefox, Babylon Search still appears:

    1 type the address bar about: config and press ENTER.

    2. confirm the pop-up message.

    3. in the search field, type "browser.search.selectedEngine. (remove excess text here)

    5 restart your browser.

  • I can't export my video because I get errors, please help!

    I use a Macbook Pro.

    Mac OS X Version 10.8.5

    Processor: Intel Core i5 to 2.3 GHz

    Memory: 4 GB 1333 MHz DDR3

    Final Cut Pro X

    Version 10.0.9

    WARNING: I can't move to Mavericks like I have no way to back up my computer. So please don't tell me to level to the Mavericks, because I don't want to take the risk of any lost files correct?

    So I used this software all day yesterday & he fights me every step of the way. I've finished editing a video & I want to record to an MP4 Player or any video file, but I can't. Whenever I try to share the file it keeps giving me either of these messages.

     

    '2033' part was when I got my video ready to go with all images and titles on it, or maybe when I tried he shares under "Video & Audio. Quicktime error popped up & I think it was when I wanted to just download the video itself, because when you do that, I just wanted to find the problem. Or maybe error quicktime burst when I had everything ready to go. I'm sorry, I can't remember because I'm stressed right now and I don't know what to do.

    Note: Yesterday was my first day, I've never used Final Cut Pro x. So assume that I'm a total novice at this.

    Please give me steps on how to solve these problems. I really hope that there is nothing wrong with my video file because this is the only file I have. I'm just combining my video file and three still images which fade at the beginning and at the end. That's all. The video file is about 7 minutes long, and I really hope that there is no all other executives who will give me errors, or worse, that they may be damaged. This software is in fact legitimately * me off and I would like to help you guys. Any help and advice would be much appreciated. Thanks for reading.

    -SJ128

    Change general preferences to show images. Go to the 2033 section and see if there is a problem. You might have to repalce a call or do something to solve a problem with the media.

  • I tried to install KB2680317 several times. Please help me

    I can't install KB2680317 several times & it will not be installed.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/security-update-for-Microsoft-works9-kb2680317/a134d0de-0d94-49fe-BCBC-34a871eb6693

    UTC/GMT is 02:52 Friday, April 13, 2012

  • Having a problem with access to several sites. PLEASE HELP QUICKLY!

    OK so I still really still did nothing with my laptop, but I tried to enter in google, download Itunes and I can not even access the E-system, all my sites search engine don't "work" ive been all day, ive tried already check if Windows 7 is the blocking of sites, my internet itself to have this problem but I can't seem to find out what's wrong , ive used IE9 and Chrome, but the two do not work even if I charge it appears always like it or at least someone to look how to do everything and send me the link...

    Try to run a full system scan with:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • BlackBerry smartphones please help me I can't live without my BB

    My BB Curve 8520 White Watch screen says App Error 523 and then at the bottom of this, there are highlighlighted Reset in black, by clicking on it, the phone restarts and do the same again. I removed the battery several times. Please help me

    Hey dubem747,

    Take a look at this help article to solve your App Error 523.

    "Error 523", "App Error 523", or "JVM 523" is displayed on the BlackBerry smartphone

  • I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install the update ios 9.2.1 Please help installation error!

    I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install error install ios 9.2.1 update.

    what I can't finish the upgrade because of this error, please help immediately, thanks!

    As you change major versions (6-9), the complete installation program must be downloaded. Then, it must be verified and unpacked. Then to do room to write the new while the former is still partially around. He spells that require at least 6-7 GB of free space on the device for an Over The Air update to even have an inkling of a chance to succeed.

    If you do using the iTunes program on a Mac (favorite), download, verification and unpacking occurs in the computer (which has usually a lot more resources than the phone), reducing needs about 1 to 2 GB free space.

  • Major problems mouse, left click acting as a click right, very annoying!

    Hey guys I have a very annoying problem. I read about it online as other people seem to have made the experience, but there is no real definitive answer. On rare occasions, my mouse will be funny. When you press the left button, it will act as the right and the right button will continue to act as the right one. When you go into the settings of the mouse, even if swap you them around her still acts as if there are two right click and left click No button. I tried a number of suggestions elsewhere on the web, including re-starting my pc several times, trying to update windows, turning off the mouse, re - install, using a different mouse etc... No matter what I do, the problem persists.

    The only way to get the return to normal of the mouse is either to turn off the pc and leave it a few hours, in which case even sometimes that does not work. The only other time he rectified himself is in itself. Sometimes it will just fix itself without doing you anything for her.

    I'll be very grateful for any advice that anyone can give. Does anyone else have this problem? Anyone know anything on this subject? Thank you

    BTW my system info: Windows 7 Ultimate 64-bit, processor AMD Athlon X 2 2.2 GHz, 4 GB Ram, disks of XFX - MI-A78U-8309 M/B, a few SATA, Logitech MK300 wireless K/Board of Directors and the mouse.

    Salvation;

    Can you go start\control configuration\systeme and security\Administrator Tools\Event Viewer

    Please check if you have any error in Applications

    as to publish here or visit our website with the error number to search for

    Thank you.

  • I messed up a toolbar (I think) and I can't send emails. He didn't is a not tab 'send' to left click. But I still get e-mails. Please help me!

    There is no 'Send' on my computer tab. I receive emails, but cannot answer. I have a response tab and can write a message, but I can't send the answer or send a new message. Please help me! Thank you.

    Menu bar main in a composition window:
    Display - toolbars
    Check the 'Composition Toolbar'.

    In the case where the menu bar is hidden so press Alt or F10 to bring it back.

  • FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

    FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, clear the search box, and then select

    DIAGNOSIS AND diagnostic USE information reports ▹ user

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • When to change a start page preferably, a dialog box pops up and won't go away, even after clicked and restart FF. Please help ASAP

    This dialog box indicates "an attempt to change your home page and default search has been blocked" & "click to change these settings. After clicking on the "close button {X}", won't let the box of my screen, where it blocks ANY activity. Which means that, not only the dialog box covers aloud to the left of my screen (on my Mac, blocking access to all of the choices of window button).

    Literally blocks the activity of the screen all THE more of a 3 "-4" AUTOUR / greater than the size of real dialog box. " Move windows just so I can access the window buttons, although clear of ' under / covered by "dialog, the buttons still do not accept that is clicked, to inch away from the box. Even if it seems to be completely cleared and outside the box.

    When I go to another application, like the finder or to a full-screen video game, your still dialog box, any blockage 'slot' and 'around '. It will not disappear, even after that I went to my preferences and original re - has chosen settings of no.

    PLEASE HELP AS SOON AS POSSIBLE BECAUSE IT IS VERY ANNOYING SCREWING WITH MY WORKFLOW - SEE PHOTO! Unfortunately, your browser will not upload a screenshot of 49K of this anomaly.

    Moreover, to load the image, you can meet your own message and attach the image to the response. Please change or blur sensitive information in the file before uploading the image.

  • left-click on the icon of firefox in the taskbar displays a list of all the tabs. How to open just to the last tab?

    I use the tab grouping feature a lot. It means that I have 100s of tabs open at any time.

    The problem: once a switch between tab groups, the Firefox icon in the task bar changes in what looks like multiple echoes of the Firefox icon. I guess this is supposed to represent several groups of tabs.

    Before the 20th of Firefox might click on the Firefox icon in the taskbar, and would come to the top and show the last tab, I worked on Firefox.

    Since Firefox 20 a left click on the Firefox icon in the task bar now displays a list of the 28 tab + seemingly random tabs. Many of them said only: "Mozilla Firefox" instead of the site represented by this tab (because the tab has not been accessed recently).

    To open Firefox to the last tab, that I worked on is now a real chore. I now have to choose one of these tabs 28 + (which is 99% of the time the tab bad), then switch to the Group of the appropriate tab and then find the tab I've worked on. It usually takes 5-10 clicks to get back to where I was before I've minimized Firefox, or before that Firefox has lost focus. (In the past I could simply click on the Firefox in the taskbar, and restored Firefox icon where I left last.)

    How can I disable the list that is displayed when a left click or move the mouse over the Firefox icon in the taskbar? I would like the ability to minimize/restore Firefox by clicking on the Firefox icon in the taskbar, as it was in the past, do not get a choice of random tabs.

    I think that I thought about it. Under OPTIONS > OPTIONS > TAB, uncheck the box for "Show glimpses of tab in the Windows task bar" and then click OK

  • Satellite A200-1YX: sometimes Touchpad left click

    My A200 is 20 days. OS is Vista Home OEM.
    From time to time, my left touchpad product clicks, which can be very annoying if I write something.

    I know it's left click, because if I have large text, my cursor appears from time to time in the line where the pointer is at the moment.

    I tried with the uninstall/install Touchpad drivers, but it did not solve my problem.

    Best,
    VJT

    Hey, Dragan

    Please don t be angry with me, but I n t think a touchpad could create left clicks automatically.
    I think that you accidentally hit the surface of the touchpad while typing, and consequently, the cursor put another position.

    Try to disable the touch pad using the FN + F9 key combination and check if it happens again

  • j105el envy: envy of hp can not right and made a left click at the same time

    my hp touchpad cant hp envy envy cannot not right and made a left click at the same time. I don't know if it's a driver. because of this I can not play games like GTA cause I need do a right click to aim and left click to shoot. is there a solution to this

    @gwatanaj ,

    Hello and thanks for the display on the HP support forums.  Here is a link that may be useful.

    HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8)

    What you are trying to do may not work with your touchpad.  Normally when it is best to use a mouse.  The hardware is built to be different and you might find it easier to work with.

    If you need help please post back.  First of all, check out this link.

    Tips for the "very best question.

    So, please indicate your model full and product number.

    I hope hear from you soon.

    Thanks again and have a great day.

Maybe you are looking for

  • How to hide the menu icons of context via userChrome.css (FF nightly)?

    Is there a tweak for Firefox to completely hide the menu icons (right menu) context?userChrome.css solutions are walcome.

  • Available to add the second internal hard drive to 17-e117dx

    Hello Can you let me know, if there is provision to add the second internal hard drive for HP Pavilion e117dx 17. If so, one) is there requirments or the specifications of the hard disk (any make or model); (b) what equipment will be needed and where

  • HP TouchSmart IQ540uk touchscreen windows 7

    Hello I have HP TouchSmart IQ540uk, Windows 7 64-bit operating system and I cannot calibrate touch screen. Do I need a driver or it should work after installing Windows 7. I tried Windows calibration (Tablet PC settings and calibrate) but when I touc

  • NOR-DAQmx 8.0.1 undefined reference

    Hello I'm new with NOR-DAQmx on Linux. After reading the posts in this forum, I was able to successfully install OR-DAQmx 8.0.1 on OpenSUSE 11.0. When you run "nilsdev", I get the following list of features: OR PXI-6255: "Dev4.OR PXI-6733: "Dev3.OR P

  • Replacing the battery for Compaq Presario C 785 TU

    My name is Prince Mathew. Is my laptop model Compaq Presario C 785 YOU. It has a battery 6 cells. I would like to buy a new battery of 12 cells for the laptop. I intend to buy it through online purchase. So please suggest me what battery model will b