Left mouse button

Similar Questions

• Satellite P750-136 - left mouse button does not work

  I don't understand what the problem is. My left mouse button does not work. If I put a little pressure on the Panel located under the button space then the left button of the mouse works.

  What should I do? It feels like a hardware problem, since I bought the laptop in November my laptop is still covered by the warranty.

  What you can do is to check the touchpad settings and make sure that everything is OK.
  I'm don't know if you noticed this since day 1, but if you think it is hardware problem I recommend you contact the nearest Toshiba service provider as soon as possible. Warranty will cover all repair costs.

• Satellite L650 - left mouse button starts to unravel

  I have some problems with my left mouse buttons on my Toshiba Satellite L650 - 1 6.
  Sometimes it doesn't work and I don't know what to do.

  What should I do?

  Contact the nearest service Toshiba and ask for help. If there is hardware problem, it should be replaced.

  I put t know what else you can do about it.
  The warranty is still valid?

• Re: Left mouse button does not work on Satellite L

  Hello

  I bought this computer notebook June 2010 and I never had no problem recently while watching movies has suddenly stop and happens quite often... and recently, I noticed that my left mouse button does not work correctly

  all useful suggestions please

  Thanks in advance
  Pramod

  Hi pramod_1,

  Have you tested an external mouse if the problem is maybe a few related software?

• Left Mouse Button functions any longer after the last update no.

  After the last update, the left mouse button no longer works, I contacted HP who says that it is Micorosfts question.  When I asked the representative of the conversation, only not HP uses Microsoft Windows HP computer and said that if there is an update then also that Microsoft is responsible as well as HP as HP uses Microsoft products in the computer.  So, apart from that, I have not got absoblutly no supported.  I restored my computer to an earlier time.  Once more the left button of the mouse does work, so now, in this sense.  Microsoft since it is the problem of software due to the update you gave, apart from making a full recovery on my computer, are there updates to counter what had made the last update?

  Chingy salvation,

  Have you tried following this http://support.microsoft.com/kb/315539 kb and the removal of all drivers (even the most 'ghosts' or greyed out) for the mouse who is or has been on your system? Sometimes, there is a driver that conflicted with the new that can cause this problem.

• Execute while the left mouse button is pressed

  Hi all.

  I'm a super newb to Labview, but not to programming (who for years, C++ etc...)

  I have a project that I'm trying to do that I hope someone can point me to some tutorials or something.

  The idea is that I want to be able to press the left button of the mouse and a dial start to turn.  It will then stop when I release the mouse button.  I intend to put a "indiator" randomly around the dial where the user must stop, but not until they start by pressing the button.

  Attached, this is my code so far.  Very basic for some experts like you guys, but it's my first try at Labview.

  Thank you.

  Greg

  Here is a 2011 version.  I have not opened to see if any functionality has been lost.

• HP Probook 455 G1: Left mouse button is released

  I used my HP Probook 455 G1 for about 6 months. It has never been damaged or needed repairs until today, the left mouse click below the touchpad is completely detached. It is not broken or broken in some way, and I think that everything I have domechanism together - that is more easily said than done.  I am aware that my warranty is still valid, however, I am in school and do not have time to wait two weeks to get it repaired just before my exams! Any help is appreciated.   Attatched image shows the button (on the left), the parts of the mechanism and the gaping hole in my machine (right).

  According to the message that you have recently published, I want to confirm that it is a hardware problem and I highly recommend you Contact HP support by phone to get help to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Left mouse button does not click anything

  Hey everybody,

  Firstly thank you for reading my question, anyway I have a problem with my mouse and wireless keyboard which is connected by a USB port. The keyboard works fine and types correctly but there is a problem with the mouse. The left button of the mouse that must click on everything isn't clicking. It installs and pointed out things, but nothing happened by clicking, I could still hear the sound when you click it but nothing happened, he just stayed. I have no idea on what it is, it could be the mouse (right button worked normally well) or I do not know if I pressed buttons, or a combination. I really need help, and I don't want to spoil anything else on my computer. I changed the mouse keys, so now I click on my left instead of right button, what do I do?
  Windows 7
  Processor Pentium Inside and Pentium (r) Dual Core CPU
  Model is ONETWO M3700
  Installed memory is 4 GB
  The Type system is the 64-bit operating system
  It is also touch so I can click on my computer screen and it will work.
  I know that's not the battery, but what do you, think it's a mistake? I'm so new to computer and stuck, please give some advice that don't mess my computer and advice that you think will work. I tried everything on the wick of the mouse, but I'm not sure! Thanks a lot peeps. :)

  Hi Hanka,

   
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the mouse?
  3. do you try to connect to a different mouse and check that it works?
   
  Check if the mouse works correctly on another computer.
   
  Method 1:
  If you use Microsoft wireless mouse, I suggest you to follow the steps from the link and check.
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091
   
  Method 2:
  Check out the link and follow the steps:
  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Let go of the left mouse button

  Hello

  I recently bought a HP Pavilion G6 1359ea about 6 months ago, and already the left button of the mouse of the laptop has become loose.

  It wobbles around when they are affected and it feels generally much more flexible than my right mouse button.

  I was wondering if anyone knows any methods to fix (i.e. He jumps or), or if I should send it to HP and if yes, how can I do this?
  (I still have plenty of factory warranty on it)

  Thank you for your help,
  James
  

  Hello Jim100200,

  I see that you are having problems with the mouse on the computer. I recommend you contact HP, since you are under the factory warranty.

  Here are the contact options for the units sold in the United States.

  Here are the options of contact for units sold outside of the United States.

• my left mouse button does not

  HID SJ920MJ03802 REV A2 5 Windows 7 compatible mouse

  First of all welcome on the forums of axe!

  There are many things wrong with your mouse to the left button does not work. I suggest possibly making sure that there is nothing of clicking (e.g. dirt).

  And if you have a guarantee that I would come back, if not buy a replacement.

  Mike

• Left mouse button broken on satellite

  Hello

  the left button of the mouse on my laptop has broken pysically. I can place it in position and he always works, but obviously his loose and needs fixing, but I think there was something in the machine, some perhaps of clip that broke. The button itself looks very good. Is this repairable? and he isn't there something else I could try, I would not replace the laptop entry because of 1 stupid button.

  I did a google and nothing seems to come for this problem.

  Thank you

  Hello!

  In my view, there is only one way to go to a local ASP.
  They can replace the mouse left button or lid.

  If you have experience with laptop disassembly you can look on eBay. Maybe you can such party.

  Good bye

• Left mouse button doesn't work is not on my laptop

  My left button of the mouse is suddenly no longer works on my laptop. Instead of the function of click, she appeared a little icon of 2 triangles with a dot in the Middle, and they were in the circle.  Instead of click, it scrolls vertically on the page.  Now, it does nothing when I click on the left button of the mouse.

  I checked my settings of the mouse and the left button is set to "Click" according to its function, not scroll or anything else. I just started this suddenly, doing without all the parameters being modified.

  Can someone please? It's driving me crazy. Thank you very much!

  PS - I have a Toshiba, but I think this is not the laptop, it's Vista (?)  Also, I have not installed anything recently, etc..

  Hello

  Try the system restore before that happened:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  ================================================

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See Toshiba and Forums Support.

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Check with the manufacturer of system support, documentation in line, and/or forums he has probably shortened that
  enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Re: Satellite T130-15F left and right mouse buttons both work as right click

  We have a Toshiba Satellite Pro T130-15F which presents a strange problem when any user logs on to the laptop and they try and use the left button of the mouse on the laptop it works like the right mouse button, if the laptop is not a left mouse button to work as a left and right work as right button.

  I tried to rebuild the laptop several times I tried also to restore the bios default settings, I would be very grateful if anyone has any ideas on this.

  Thank you

  Peter

  > When a user logs on to the laptop and they try and use the left button of the mouse on the laptop it works like the right mouse button.

  You can connect the usb mouse to check how it will act? If the usb mouse works properly, it may be malfunction of touchpad.

• I have to press my left touchpad mouse button too hard to make it work

  Hello.  A technician has worked on my touchpad mouse and now I have to press on / click with the left mouse button too hard for her to work/register I am clicking on it.  I don't know what the mouse setting to change to fix.  I'm afraid that if I go to by clicking on it too hard I will break.  Can someone please tell me how/where to adjust the setting.  Please be precise because there are several settings, it may be.  I tried to adjust the click fast/slow, but that's not all.

  Thank you!

  He didn't touch anything in terms of reassembling any what, everything he did was in terms of changing the settings - I was there

• Updating of increment (ATTR_INCR_VALUE) a control digital while holding the mouse button

  Hallo,

  It is a problem with a digital command.

  I have a control that accepts a broad range of values: 0.01 to 60000.

  What I want to do is changing its incremental value according to the current range.

  So, if the value of the control is 2000.6000 to change it to 1000 stage, if it is less than 2000 but more than 200 - at the stage of 100 etc.

  The following code works if I change the value of the control with SIMPLE mouse clicks. But if I just press the left mouse button and hold it down, it does not work!

  Debugging of the shows, he correctly process events and passes to the attribute to (both) control. But change of ATTR_INCR_VALUE seems to have no influence until I release the mouse button.

  ------------------------------------

  int CVICALLBACK SetTint (int command face, int, int event, void * callbackData, int eventData1, int eventData2)
  {
  float dIncValue = 10.0, dIncValue_temp;

  switch (event)
  {
  case EVENT_VAL_CHANGED:
  GetCtrlVal (hMainPanel, MAINP_INTTIME, &fTint);)
  If (fTint > 2000,0) dIncValue = 1000.0;
  If ((fTint<=2000.0)&&(fTint>100.0)) dIncValue = 100.0;
  If ((fTint<=200.0)&&(fTint>20.0)) dIncValue = 10.0;
  If ((fTint<=20.0)&&(fTint>= 2.0)) dIncValue = 1.0;
  If ((fTint<2.0)&&(fTint>0.2)) dIncValue = 0.1;
  If (fTint<=0.2) dincvalue="">

  SetCtrlAttribute (hMainPanel, MAINP_INTTIME, ATTR_INCR_VALUE, dIncValue);
  break...

  -------------------------------------

  Addition of events such as

  case EVENT_COMMIT:
  case EVENT_LEFT_CLICK:
  case EVENT_VAL_CHANGED:
  GetCtrlVal (hMainPanel, MAINP_INTTIME, &fTint);...)

  does not help.

  Swallowing of events after the setting of the attribute as

  SetCtrlAttribute (hMainPanel, MAINP_INTTIME, ATTR_INCR_VALUE, dIncValue);
  Return 1;

  does not help.

  Things like-

  ProcessDrawEvents();
  ProcessSystemEvents();

  does not help also.

  Any other suggestions? :/

  Hello

  Joint an example very smal how you can achieve this

  Best regards, Fabian