Left mouse in the desktop connection remote

Similar Questions

• Desktop connection remotely from Windows 7 to windows XP Edition family

  I have a laptop running windows 7.  I'm trying to use the remote desktop connection to connect to my office.  The desk top is an Imac.  I have partitioned the hard drive on the Imac and am running windows xp home edition on the side of the windows partition.  It is this 'computer' and I try to access it via the desktop connection remotely from my laptop.  Thanks in advance,

  Rob

  The editions of Windows Home, if XP or Vista (and maybe even 7) may not be the side server to a remote desktop connection.  They do not contain the code necessary to accept the connection.

• Cannot run executable LabVIEW on desktop connection remote

  I have a couple of executable files, which are compiled using a LabVIEW 2011 development system, installed on a Windows XP computer.  These programs run fine when I double-click the icon while sitting at the computer.

  If I connect to the phone remotely from another Windows XP computer using Remote Desktop connection, I can use the remote computer normally except for the executables LabVIEW.

  When I double-click on one or the other, I get the error message displayed in the attached file. The part of the text of the report has no useful information, just two lines that seem to be field for e-mail names.

  What gives?

  Remote debugging is not a good substitute because it requires the executable file already be running.

  I was able to run two executables LabVIEW on desktop connection remote to a virtual machine of Windows 7 with 2 GB of RAM, running on a MacBookPro using Parallels Desktop.

  This confirms that the problem was insufficient for memory resources.

• I am not able to make a desktop connection remotely through Citrix

  I use Citrix to connect to my desktop of my computer at home.

  For the last two weeks, I had connection problems. Sometimes it works, but more often, it isn't. I get the error message says the following:

  "The specified remote computer could not be found. Check that you have typed the correct computer name or IP address, and then try to connect again. »

  I know I type the correct computer name because it is saved in my drop-down list. As far as I know, nothing on my desk, computer or computer at home has changed, but the problem is incompatible because sometimes it connects and sometimes is not.

  Basically, the steps I take are as follows:
  1. go on citrix. [company] .com
  2. enter my username and password and click Connect
  3. click on the desktop
  4. I get a pop up message saying I chose to open launch.ica coming http://citrix of Citrix ICA connection. [company] .com. What should Firefox do with this file?
  5. I choose to open with Citrix ICA Client Engine Win32 (default)
  6 then I get another pop up message saying this program has known compatibility issues and Citrix ICA is not compatible with this version of Windows. -C' is the same message that appears still, and it's always worked before.
  7. I click on the program
  8. it brings me to a generic research office running Microsoft Windows Server 2003 R2
  9. I then click on the Start Menu and choose desktop connection remote
  10. I select the name of the computer in my office (which is default) and click on connect

  That's when I get the error message.

  Anyone know what could be the problem and how can I find a solution?

  Hello

  Sorry for the Delisle in response.

  Given that the problem is related to the remote desktop connection, I suggest you contact the assisted support by using the following links:

  https://www.Citrix.com/support

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  I hope this helps.

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• a small banner is displayed in the lower left corner of the desktop

  original title: embarrassing banner.

  When I turn on my laptop with vista premium acer5535, a small banner is displayed in the lower left corner of the desktop. It is a number of viewkey relating to a site, I'm not sure that my wife would want me to look at. can someone help me please?

  Hello pauljackson_171,

  I've added a link below I think to be able to help.  Also, I've included a link below for Microsoft Security Essentials.  I would say that if you do not have antivirus protection, install and analysis.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/is-Microsoft-Security-Essentials-all-the-anti/c900d6a2-8b0b-4bf1-b28e-b5b2dbc76d18

  Microsoft Security Essentials:

  http://www.Microsoft.com/en-us/security_essentials/default.aspx

  Thank you

  James

• 23 "monitor a 3-1/2" black band on the left side of the desktop background. In other words, the bottom would fit on a 19 "monitor. How to expand the context in which to adjust Monitor?

  23 "monitor a 3-1/2" black band on the left side of the desktop background. How to expand the context in which to adjust Monitor?

  It's the monitor that is provided with the DELL Expirion computer when it was purchased in July 2012.  I paid a "technician" (certified) to transfer the info from my old computer.

  If its a LCD monitor, you PC resolution to the native resolution of the screens?

  Some monitors have a button self-configured, try pressing that. It can help if there is one.

  At the same time, in your 19 "" are you the full desktop or is it lacks a little? If so, try to change the settings for horizontal and vertical screen on the monitor to move the image.

  Sorry if this is how to navigate, it's hard to describe.

  
  

  More info of calibration here - http://windows.microsoft.com/en-AU/windows7/Getting-the-best-display-on-your-monitor
  

  Also, some graphics card drivers were themselves built the calibration setting, which may be worth a visit, but this can vary from machine to machine and cards.

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• I can't start a desktop connection remote with my file server, but I can't get to my domain controller. Other computers on the network can initiate together.

  Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How to: use desktop connection remote with windows 7 to windows xp sp3

  Original title : is it possible to use the new remote desktop provided with windows 7 to windows xp sp3 I want to use the audio options

  Hello
  Please I want to know if there is any way to use the new options included in windows Remote Desktop connection 7 update connection Remote Desktop in windows xp sp3 or as the RTD of widows 7
  is there a way please just send me email to * address email is removed from the privacy *.

  Thanks in advance
  hamadakhalaf

  Hello

  You need third-party software to do this, I suggest you use your favorite search engine and check for the software that supports this option.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out this link:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/a29f6207-4551-4AE1-941e-364919f50ad4

  It will be useful.

• Lack of desktop connection remote

  I am trying to establish a connection between my computer and my work computer. The "Remote Desktop connection" is missing from my Menu accessories. I tried to download the remote desktop connection software, but received an error message because apparently I have already. Anyone know where I can find it?

  Button start--> RUN--> type:

  mstsc

  --> Click OK.

• How to use desktop connection remote on Vista Home Premium to Windows 7 computer.

  original title: HOW TO USE DRC ON VISTA HOME Premium TO ONE OTHER COMPUTER WITH WINDOWS 7

  I would like to know how to the DRC to connect to another computer with windows 7 for business. I have the ip address, the name of the computer, dns connections, physical, active dhcp, ipv4 addr and mask ip address-specific ipv4 subnet.

  How do you use the DRC?

  Help, please.

  Thank you.

  Hello

  This thread should give you all the information you need to know about the implementation of remote desktop

  http://TechNet.Microsoft.com/en-us/magazine/ff404238.aspx

• Desktop connection remotely from a windows Vista editions home basic - to windows 7

  I would like to know how to set up remote Desk Top connection. My friend who has really bad MS, I've been helping him years threw a Windows xp. Well she got a new computer windows 7Im don't know what windows 7, is-, but I have a windows 7 and a vista Home Basic, I've done everything I know to try to get it if I can get thrown on him and told him the things I've done. She sent me the invitation and the password but he always says not the right, then I tried to connect to it and it tells me that I have no connection threw the T gateway server. Could someone please tell me what to do to get this set up. I don't understand any of this. Thank you very much for everything you do for us. Silver

  You'll have to read through these links about operating system versions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  http://www.howtogeek.com/HOWTO/Windows-Vista/turn-on-remote-desktop-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• How can I stop the charms appearing almost whenever I move the mouse on the desktop?

  I also still find me on the start - page or the page full of applications when I'm not working on something on the desktop. It is easy to recover, by moving the mouse to the upper left corner, but it is very annoying.

  Unfortunately, this action is fixed.

  A search on Google "Disable charms bar" will bring up results for a registry hack, your risk"

• Double click of the mouse on the desktop icon shortcuts no longer works.

  Suddenly my mouse can move screen on the desktop page but double click on shortcut icons has no effect.  Must go to the bar at the bottom to open applications. Once in the application, the mouse works is great.  Problem is just Office page.  I have the edition of Windows Vista Edition Home Premium with a Norton security suite.  I restarted the system several times with no change in the problem.

  John of Kuyper

  ********

  Suddenly my mouse can move screen on the desktop page but double click on shortcut icons has no effect.  Must go to the bar at the bottom to open applications. Once in the application, the mouse works is great.  Problem is just Office page.  I have the edition of Windows Vista Edition Home Premium with a Norton security suite.  I restarted the system several times with no change in the problem.

  John of Kuyper

  353-561-4307.

  Try this...
  Start button > in the search box, type folder options > press the Enter key > general tab, under click items position as follows, click on the radio in front of double-click to open an item > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.