Left SHIFT key push the window at the same time key

I don't know if it is a hardware problem with the keyboard but Ive tried many things to resolve this question and I'm not sure what to do. Press my left shift key results in my left side of the window also key be pushed, I am positive im not accidentally pushing it and it still happens if I pull one of the keys. Press button of the left window also causes my left shift button to be pushed. tested with the on screen keyboard and that's what it shows. I tried to reset my keyboard via the menu of languages by switching input languages and reconnect my keyboard and restart my computer, but so far it has not fixed anything. Happen randomly while I was browsing the internet.

The most likely cause of this problem is a faulty keyboard.  If it is a desktop computer, it's simple and inexpensive to replace.

In the case of a laptop, it much more complicated and expensive.  Unless you're technically adventurous enough, probably too intimidating for you.  First problem will be to find the right replacement.  Which can be difficult because there are a myriad of different keyboards, even for the same brand/model.  It is a common problem on laptops because the keyboard is the computer cover under.

Tags: Windows

Similar Questions

  • Apple Magic Keyboard 2 (2016) detects only no more than 3 keys at the same time!

    Hello. So I don't know if there is a solution to this, but I played on my macbook pro 15 inch 2015 model very well and I was pressing 'x', 'w' + 'shift' + 'space' at the same time and four keys were detected by the game, and it worked. After I while I bought the new magical keyboard 2 (2016) and connected to my laptop. I played the same game and based on the same key combination ('x', 'w' + 'shift' + 'space'), but only 'w' + 'x' + 'space' got detected and played. Is it possible to fix this? Thanks for the future replies!

    If you still use Yosemite, as shown in your profile, you can find (if you look at the box) that the keyboard of Magic 2 is planned for El Capitan.   You should go if you want to get the best out of it.   I can't speak for specific failures, but there have been similar problems with the Magic Mouse 2 where the upgrade it is resolved.

  • Windows will behave as if the left SHIFT key is stuck

    I had this recurring problem where Windows will behave as if the left SHIFT key is stuck. I opened the keyboard on the screen and it does not show the key to press. While this issue happens, unplug the keyboard and by him plugging back in does not solve it.

    I'm pretty sure that NOT to be the problem:
    (1) something inside the keyboard causing it to stick.
    (2) the keyboard is defective.
    (3) to a new update/program installed.
    (4) initiated by the user, (seemingly random).
    (5) the motherboard is faulty.

    After searching several forums, it is clear that this is a widespread problem and is NOT limited to my hardware or operating system.
    Unfortunately, it seems that most Tech this fired up as an individual problem and do not give the solution of rolling back/reinstall windows, which are not an option for me.

    It is not last forever, which means that I still have not restart before it fixed itself (sometimes), and I tried almost every combination of buttons to try to repair.

    System information:

    Gigabyte Z68AP-D3

    Microsoft Windows 7 Home Premium Service Pack 1 6.1.7601

    Intel Core i7 - 2700 k CPU @ 3.50 GHz

    Total system memory: 8 GB memory DDR3 - 1600 (PC3 - 12800)

    GeForce GTX 550 Ti 2 GB GDDR 5

    DirectX 11.0

    In case you need something I didn't not give please ask.

    Once again, I searched for some time prior to this announcement and have found no answers at the moment. Thank you for your time.

    I had the same problem after breaking down or brewing Maj (sticky keys). See if the "Set up sticky keys" or deactivating solves the problem.
    http://KB.IU.edu/data/aaez.html

    Even if you say that's not a bad keyboard, it could be. Try using a different keyboard if the deactivation of the sticky keys does not work. Sorry if it's a laptop and you do not have a USB keyboard.

  • Left SHIFT key of the T40 reveals context/right click menu?

    Hello all-

    On my T40, on which I recently got properly installed, Windows 7 has a curious behavior:

    When I press the left SHIFT key, it works the same as if I had pressed the right button of the mouse.  It works otherwise, I.e., then its use to capitolize a letter in an e-mail, the letter is capitolized, but as soon as I let go of the SHIFT key, the context right click menu will then appear.

    It's extremely annoying, because I can't continue typing until I sailed out of the menu.

    I checked to see if the keyboard customiser utility is the cause, I have currently my left Alt key works as a button of Windows, but it does not ask this question.

    Anyone have an idea how I could go about fixing of this?

    Thanks in advance,

    G

    Too bad.

    Had the customizer of keyboard configured to use the time left as the key to the application key.  Duh.

  • Presario CQ60 space bar and left SHIFT keys not working not

    the week past some of the letter were alittle unresponsive and then yesterday my left move and SPACEBAR completely qiut working any help would be great. I'm on windows 7 if it is a diffrenance

    Hello

    As you mentioned the left SHIFT key and SPACEBAR does not work it means you need to replace the keyboard, as an alternative, you can use the on-screen keyboard or wired keyboard / wireless. To activate on screen keyboad on windows 7 choose demarrer→ Panel→Ease of Access→Ease to access Center.Click the button start the Visual keyboard.

    Chetan 
    I work on behalf of HP

    Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.

    Click on the STAR of CONGRATULATIONS on the left to say 'Thank you' to help!

  • My left shift key beeps twice when you press on--NOT STICKY KEYS

    My left shift key does not work. The law works fine. When you press it, it sounds twice. Has Ive restore my computer to an earlier point and that did not fix the problem, any more than to disable and turn off StickyKeys. The key itself is sensitive, it leads me to believe that it cannot be the entire keyboard. Any ideas would be useful.

    BTW, I am running Windows 7 on a laptop Asus U43F

    1. See manual ASUS [service] to see if there is any special significance to it. http://www.computerhope.com/jargon/p/post.htm I thought, but it seems not applicable since it is not starting, it is when running.
    2. check the sticky keys for accessibility-related technologies starting with F1 for help. There are a number of them. start going through one by one to see if something is on. You may have accidentally market something (there are combinations of keys that do this). Control Panel, display small icons, accessibility.
    3. buy a $5 or $22 USB keyboard. IBM makes a mechanical keyboard nice $79, classic, I believe to be a joy to type on (they make them for IBM). http://www.pckeyboard.com/page/category/UKBD
    4. Plug it in
    5. Try the left SHIFT key
    6. If she still double beeps {is your installation of windows or something in the laptop, not your keyboard. you can try reinstalling windows using a repair, which is less expensive, you need to reinstall your programs and drivers, but you keep your data. you can keep this configuration, my mother a.} otherwise, {hardware of the laptop may be in need of repair could cost between $200 (replace keyboard)-800 $ (motherboard).}

    There are more expensive mechanical keyboards, but they are for games.

  • Left SHIFT key + key of shortcut to deleting?

    Typing and all of a sudden a whole paragraph or half a sentence is deleted and the cursor wraps in the To: or Subj: line!  I can only think that my finger is slightly touch the control or fn key at the same time as the SHIFT key. (I hope it's nothing worse for what is the computer works.)  Is press left SHIFT + control key or the SHIFT key + fn, a kind of shortcut for deleting and the cursor jumps to a different location on the page or in the address area? Or what may actually cause it, often now.  I just need to control the 'fat fingers' and close my fingers specifically or this description indicates something more serious for this MacBook Air (10.10.5)?  He did not before today.  Thank you for the attention you give to this concern.

    Just tried it out - doing nothing - tried on Pages and words

    The keyboard shortcut for delete as you know, is Cmd + delete

  • HP Pavilion Windows 8.1 cannot use the TrackPad and keyboard at the same time

    So when I play games on my laptop or just go on the internet I can't hold down a key on my keyboard and move the mouse at the same time, it just does not take into account my trackpad and continues to do what the action on my keyboard.

    An example is so when I play one of my favorite games and the letter on the keyboard, 'A', is reached. I also spend my head of characters to get the lens during the attack. So I spend my TrackPad to aim my head during the attack. The recoil of the gun made my gun just start to reach the sky that its supposed to. But I want to move my head to redirect during filming. Does anyone know how to solve this problem.

    Thank you

    Coler234

    Hi Coler234 and welcome to the Forums of HP Support!

    I can understand how that must be frustrating when you try to play a game and can't move your player as you're supposed to. I'll try my best to help you solve this problem. To guide you, could you please tell me the number of model or product from your computer and the operating system that runs on it. Here are a few guides for How can I find my model number or product number? and Windows operating system am I running?

    I suggest that you try to restore the original drivers for the TouchPad see if solves the problem. I am also including this document to use and configure the TouchPad (Windows 7 and Vista) in the hope that it will help.

    I have also some steps that may work:

    1. click on the Synaptics icon in the system tray.

    2. Select properties of the pointing device.

    3. Select the device settings tab.

    4. Select the Synaptics LuxPad.

    5. click on settings.

    Select ACM PalmCheck improved.

    6. click on the gear icon to open a menu of settings.

    Move the PalmCheck slider all the way to the left in the OFF position.

    7. click on close.

    8. click on OK.

    Changing the settings is now complete.

    I hope that this information help, please let me know how it goes.

    Good luck and happy playing!

  • Left SHIFT key of blackBerry Q10 is defective

    By simply pressing the left SHIFT key, the key will work. This means that when you type 'y' or 'x', I get rather 'Y' and 'X' respectively. I have a QWERTZ keyboard.

    The metal contact inside has very probably been flattened. You need to get the unit replaced. If it is less than one year and you bought by your carrier, they should be able to get a warranty replacement for you.

  • HP dv5 1002nr: mobile caps and the number key at the same time blink once

    I was doing some updates on the computer when the power of the battery is dead and when the power cord I had a black screen and the caps and digital key will appear to blink once at the same time. I upgraded the operating system about 1 months ago for Windows 7 and it works fine until the updates have started to update.

    Hey there @Masen2016!

    Thanks for the reply as on caps and numlock lights blink once each time.

    This indicates that it could be a problem with the processor,

    And you cannot pass a processor on a laptop as the system in the BIOS configuration is written in.

    If you upgrade a laptop part would be a malfunction.

    So, you can contact HP and get the machine.

    Link to contact HP: http://hp.care/2bkTGBQ

    Have a great day!

  • Satellite C55 - A left SHIFT key and q - key does not

    The Shift key suddenly stopped working around the same time as the q key. The q key stopped working gradually. I've done an update of my drivers and full of viruses and other, bot analysis, nothing helps. Anyone any ideas what else could be wrong?

    Thank you

    You must connect an external USB keyboard to the laptop to check if two buttons work correctly.
    In case the USB keyboard would work without major problems, the anomaly must be related to internal keyboard fault.

    In this case possible solution-> keyboard replacement

  • j105el envy: envy of hp can not right and made a left click at the same time

    my hp touchpad cant hp envy envy cannot not right and made a left click at the same time. I don't know if it's a driver. because of this I can not play games like GTA cause I need do a right click to aim and left click to shoot. is there a solution to this

    @gwatanaj ,

    Hello and thanks for the display on the HP support forums.  Here is a link that may be useful.

    HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8)

    What you are trying to do may not work with your touchpad.  Normally when it is best to use a mouse.  The hardware is built to be different and you might find it easier to work with.

    If you need help please post back.  First of all, check out this link.

    Tips for the "very best question.

    So, please indicate your model full and product number.

    I hope hear from you soon.

    Thanks again and have a great day.

  • Running Windows Defender and McAfee at the same time will cause performance problems?

    Will be running Windows Defender and McAfee Antivirus at the same time slow down my laptop, and it is necessary to run both at the same time.  I have windows vista.

    Hello

    McAfee is normally disable windows defender

    read this information on the Defender:

    ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

    the basics of Microsoft security has its own version of windows defender

    and other anti-virus programs use their own particular type of application to scan for spyware and malware

    It of nothing to worry and is the default action, which is designed for them to do

    If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

    http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

    and here is the method to remove it from startup in vista

    http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

    and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

    http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

         and read this information to microsoft:

    Error message when you run Windows Defender: «Error 0x800106ba»

    http://support.Microsoft.com/kb/931849

    and if you need to change startup programs read this information on the other methods of doing it without using defender

    using msconfig read this tutorial;

    How to use MSCONFIG in Windows Vista

    Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    and also try this program;

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    for a good anti-malware program try this FREE

    Download update and scan with the free malwarebytes anti-malware version

    http://www.Malwarebytes.org/MBAM.php

  • Windows 7 will not accept any ati driver and catalyst control center at the same time.

    I tried a number of ati drivers. My card is a 4870 x 2 2 GB edition. The driver that windows installs will not accept any CCC.

    I did also install CCC and only driver left. I tried to play Everquest 2, first game to install, and it crashes before the charge, gives me an error of ref dx9.

    I'm assuming that windows 7 has the new package dx so I shouldn't have to reinstall that. I downloaded some of them however.

    I'll try a restore and see if it works. If I could go back in time and never bought this o/s I now.

    This is ridiculous.

    Windows 7 DirectX 11.  You can also download and install v9 and have both at the same time, which is what I have on two different computers for this reason.

    Press the low a 3rd to: http://www.microsoft.com/downloads/en/resultsForProduct.aspx?displaylang=en&productID=9C954C37-1ED1-4846-8A7D-85FC422D1388

  • Using the touch screen and the touch pad at the same time on Windows 8

    How can I use my touchpad and my touchscreen Windows 8? I use Acer and it seems that whenever I get I have TO use the touch screen and my cursor is non-existent. I'm sure there will be a setting I can change to be able to use both at the same time, but so far I can't find answers online or elsewhere.

    Help, please!

    Hello green,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the model number of your PC Acer laptop?

    Thank you for your query details.

    I also like the fact that you want to use the touch screen and press the key at the same time.

    Unfortunately, it is not possible. However, you can use touchpad of precision which uses a variety of touch gestures to get around your computer. Touchpad different gestures are provided in this article.
    Reference:
    With the help of a precision touchpad
    http://Windows.Microsoft.com/en-us/Windows-8/touchpad

    You can also make changes to its settings to adjust the duration that your touchpad stays off as you type so that you can avoid accidentally tapping the touchpad with your thumb and move the cursor.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

Maybe you are looking for