Legacy bios boot vs uefi

Similar Questions

• Z book 15: how affect legacy BIOS boot safe mode and disable.

  How to change the new white BIOS to the old legacy? The new has the secure boot disabled in my case setting. In the tutorial from hp, he shows how to turn off startup secured using the old bios.

  dannychris37 wrote:
  

  How to change the new white BIOS to the old legacy? The new has the secure boot disabled in my case setting. In the tutorial from hp, he shows how to turn off startup secured using the old bios.

  Have you tried this.

  Start Mode UEFI or Legacy BIOS mode

• HP ENVY 17-n013na: the Legacy BIOS boot option does not work

  Support dear HP team,

  I recently bought for laptop HP ENVY 17-n013na .  It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:

  BIOS version: F.04 Rev 5.0

  I tried updating to the latest version of the BIOS on the Support site.

  To activate the option to boot legacy, I followed the following steps:

  • Entered, BIOS configuration utility
  • Go to the System Configuration
  • > Boot options
  • Changed the setting to the Legacy Support on " Enabled"
  • F10 - save changes & exit

  Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.

  Please provide any help & suggestions.

  Thank you.

  Kind regards

  Eugene

  I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html

  Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc

  Can close the topic now.

  Thank you.

• HP 17.3 E0067cl UEFI BIOS. boot order fails.

  total of history: end-to-end.

  subject, the flash player. 23 to 32GB (mine is 32 Sandisk USB3, extreme, written 100 MB/s.

  will not work with rebecca, or (what we call it now)

  It won't work, create backup USB flash, "" create the recovery disk ".

  It just shows the "daisy" spinning throughout the day.  on a brand new laptop HP, 20 July 2014, new in box.

  I just ran sfc /scan now and spend.

  my best guess it that windows update to 8.0 (100) killed this "feature".

  or my 8.1 updated. (toss the coin)

  I ordered the new installation of HP for $18 disc...

  so bad to close this topic, with "operator error", never update then try running to build your own, backup media.

  RIP

  later...

  the second problem is that the bios does not allow. My next update.

  a new SSD.

  I got it to work.  but the BIOS does not see the two disks. ! (in bios boot order) UEFI.

  I solved this problem by removing the 2 left 1, the old HARD disk.

  now the SSDS works like the lighting and the BIOS, can be ignored.

  I used Acronis to make the all the steps above tib files and evolutions'm so good... and made and a huge external drive.

  problem solved.

  closed...

  This has something to do with what we were talking about earlier on recovery and flash player?

• Error of w3 Acer after the partitioning of c: drive, error, "recovery disk starting with the help of the legacy bios"

  I want to do partition in acer w3 to make second and third disc... After a partition on the c: drive, I can't start windows. It is blue screen and restart, screen, reboot, blue and continue like that.

  I have the recovery disk.  It can start on a recovery disk. but when I choose the option system restore of operating or completely restore computer to factory settings.

  "He said,"Please THIS RECOVERY DISC using LEGACY BIOS BOOT MODE "

   

  When I pressed win key + power: a required devece is not connected or is not accessible
  

  0xc0000225 error code
  

  You must use the tools of recovery on your installation media.
  

   

   

  I try to reinstall using win 8.1 flashdisk dvd or usb, but acer w3 cannot start on it / acknowledges.
  

   

  My bios setting:
  

  v1.07
  

  active F12 boot menu
  

  D2D recovery active
  

  FTPM active support
  

  start the order of priority: 1 cdrom usb 2. hard drive USB 3. Windows Boot Manager
  

   

  can anyone help?
  

   

  I can start to win 8 installation usb flashdisk

  I use rufus software to create bootable win8. in the parameter use: GPT partition for computer uefi, fat32, 16 KB

  If I repair windows, I'll let you know

• Possible to install Win 8 of recovery in Legacy Bios mode discs?

  Is it possible to install Win 8 of recovery disks in Legacy Bios instead of UEFI mode, as it comes with?

  Or will install it automatically use UEFI mode and configure start secure even if your bios is set to Legacy Bios installation mode for Windows 8?

  In addition,

  If I install a clean copy of windows 8 from the official Microsoft Windows 8 Core RTM dvd (same version as my system) and it detects and accepts the built in Win 8 product key and key of CD which is built in my Bios and it activates as valid installation and activeted - this void my warranty?

  (It's the same exact Windows version and license I paid HP for except it has not added recovery partition or software of HP so I don't think he would cancel warranty... especially since installation has accepted the built in bios keys - but is this correct?)

  Don't know everything if the recovery will install in legacy mode, try and see.

  Install a different copy of the same version do not cancel the warranty. However sometimes HP will require you to reinstall OS original to avoid the possibility of problems or if you need warranty service. Don't forget to burn your defined recovery disk before destroying the origianl OS.

  You can also find it advantageous to burn them to dvd or save to hard drive USB external your C:\SwSetup file with drivers and software provided on the original laptop. Save a lot of time to download on another computer and transfer it later.

• Update the BIOS on a booted TS140 UEFI

  My TS140 boots Win7x64 UEFI mode. It's fast and quiet and beautiful. It is due for a BIOS update, although its present 99 for later, A8A.

  Instructions to update the BIOS via BACK to call for the creation of a BACK with Rufus bootable USB flash drive. The flash player is likely to be a legacy MBR bootable.

  Is there a risk of harm a system UEFI boot from and update the BIOS with a disk MBR-started? I have to undo, redo, or whatever it is reset after perform the update?

  Hello

  You should be able to update via the BACK without any problem and should not affect your BIOS settings.

• How to change the UEFI to Legacy BIOS?

  Hello

  I have PACKARD BELL IMEDIA S2883 with preinstalled Windows 8.1. East of UEFI BIOS and I can't fint option change in Legacy BIOS. In the UEFI does not detect boot devices inherited even with the option of secure boot disabled, Legacy USB active. Is it possible to use standart Legacy BIOS? Any help will be appreciated!

  Hi ANONIMNIQ,

  Could you tell me what is your current BIOS version? Also, could you send me a private message with your serial number? I'll see what I can find for you.

  Cory

• HP Pavilion 15 p201nt: HP Secure Boot & Remove UEFI BIOS

  English (İngilizce); My computer İs running Windows 8.1 Pro Operating System. But I want to İnstall Linux. HP secure boot and UEFI need to lift İt. HP Support page; http://support.HP.com/us-en/document/c03679391 I followed the İnstruction but I could not. I have remove the secure boot success. But I didn't know the CD - DVD drive boot manager. Guidelines could also be a problem, I think.

  Please, help me... !

  [GOOGLE TRANSLATE]

  ------------------------------------------------------------

  Türkçe (Turkhish);  Benim Bilgisayarımda Windows 8.1 Pro İşletim Sistemi Mevcut. WADA Ben Windows'u Kaldırıp me İstiyorum Linux Yuklemek. Tabi Bunun İcin BIOS HP 'nin Sistemindeki secure Onyuklemeyi ve UEFI' yi Kaldırmam Gerekiyor. HP'nin'm Sayfasında ki; http://support.HP.com/us-en/document/c03679391Y onergeleri İzledim ve Adım Adım Eksiksiz Uyguladım. Secure Onyuklemeyi Başarı Kaldırdım Fakat Yonergeleri İzlememe Rağmen do Yaptıysam Olmadı island. Bir Turlu Boot Manager'da CD - DVD Surucusunu Goremedim.

  If you plan to dual-boot with Windows and Linux, you know why they're BOTH need BIOS or UEFI.  If you switch your machine to the BIOS and install Linux, you don't then will be able to use Windows.

  Don't know what distro you intend to use, but the link to the page of Ubuntu forums on UEFI facilities has a lot of useful information: http://ubuntuforums.org/showthread.php?t=2147295

• Add the entry to the Bios boot

  I'm looking to restore the boot entry uefi but having problems to find in the bios

  https://www.Thomas-Krenn.com/en/wiki/Restoring_UEFI_boot_entry_via_motherboard_replacement_or_BIOS_u...

  No idea how to do this on a Thinkpad P50?

  The Bios Lenovo does not allow you to add a boot entry. This is necessary if you restore a hard drive using imaging software, without it, you are unable to start the system restore.

  Edit: included more details

  The imaging program that I use is dd on linux. The dd command not the installer boot uefi entries.

  I run currently 3 separate BONES on 3 discs (the joy of owning a P50). I managed to find a way to add entries of uefi boot in Windows. The program EasyUEFI (http://www.easyuefi.com/) works perfectly.

• Satellite C660 - 1ME - the missing BIOS boot screen

  I updated the BIOS on my Toshiba satellite C660 - 1ME to version 1.20 - WINNER of the Web from Toshiba site.
  After the missing BIOS boot screen, so that now my laptop starts directly with the Windows startup screen

  I tried pressing any key at startup, but nothing happened
  I tried to re - install the BIOS (old and even new version), but I got error that I have "identical or newer BIOS version..."

  can you help me please?

  > I tried pressing any key at startup, but nothing happened
  You mean F2, F8 or F12?

• Can't get into BIOS/BOOT menu on my laptop satellite

  Hi all, I can not enter the menu of the bios/boot on my satellite and I get pretty nerviós so far so I decide to get help here, will be very greatfull for any assistance at all!
  SOLVED

  Post edited by: Kaloian

  If the problem is resolved, let us please know what model phone you have and what was wrong.

• HP stream 11-d001dx / 11-d010n: Bios boot password

  Please help I need a BIOS boot password
  Recovery for my computer code
  Stream HP model number
  11 - d001dx or d010nr-11, I get this message
  System disabled
  54852504

  Hello

  Enter 41730520

  Kind regards

  DP - K

• Problem with the BIOS boot image

  Hi - I recently updated day/flashed the BIOS of my T60 (2623-KFU) through windows by using the Setup files in the support section. I noticed the image of the characteristic changing BIOS boot and creates the Logo.Mod file that I have included in my BIOS flash. However, flashing it, I noticed that the Intel Logo (top-right) and the Lenovo Logo (right & Vertical) still exists and overlapped my custom image.

  Is it possible to remove these logos so that I can have a clean design beautiful original appears at startup? I tried flashing back to nothing does not.

  ThinkWiki says that you have to work with them. I didn't find a way to remove them.

  http://www.ThinkWiki.org/wiki/How_to_change_the_BIOS_bootsplash_screen

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.