Legal notice to start carplay
Hello
I just bought a new unit main with carplay aftermarket kenwood. It displays a legal warning on security etc., whenever I connect the iphone. After seeing several times, I think I got the message and did not need to see more. It will be troublesome if it continues, press OK button. Is this normal? If so, can it be turned off?
It may be required by law, check in your province or territory (wherever it is)
Tags: iPhone
Similar Questions
-
Notice of start: AppleSyncNotifier.exe
I hope someone can help.
Currently, at startup, I get the following message which reads:
Apple SyncNotifier.exe Entry Point not found
The enty point sqlite3_prepare_v2 procedure is not found in the library of dynamic links SQLite3.dll
Any suggestions on how to fix and to eliminate this problem? Any advice would be greatly appreciated. Thank you
1. you should start your own question/thread instead of add to one of 5 months.
2. given the fact that it is an Apple problem, you should have sought in the Apple forum, which has been linked in the post from August 26, 2011 to popcatonline.
3. If you do not have a folder in C:\Program Files\Common Files\Apple\Apple Application Support then iTunes probably does nothing for you. Maybe you have uninstalled iTunes, but something left me.
4. If you no longer want or need iTunes, uninstall it completely by following the instructions below. If after this you still get the error message at startup, download and install AutoRuns. Leave the scan AutoRuns, and then click the connection tab. Find the entry for Apple and remove the check mark from the box to the left of his line.
5. If you want or need for iTunes, then after following the directions below, download and install iTunes from: http://www.apple.com/itunes/download/
Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls). You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using any of these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT). See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.
Go to control panel > Add/Remove programs
Remove these applications:
1 Apple Software Update
2. Apple Mobile Device Support
3 Hello
4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
5 iTunes
6 QuickTimeOpen my computer > C: > Program Files
Delete this files (if present)
1 iPod
2 iTunes
3 QuickTimeEmpty your temp directory:
Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".If you don't see the local settings, enable hidden files:
Tools > Folder Options > view tab
Select Show Hidden Files & folder, and then click OKOnce this file is empty, restart the computer
Download & install the Windows Installer Cleanup utility:
XXXhttp://support.microsoft.com/kb/290301/XXX
Launch the utility: start > programs > Windows Installer Clean Up
Select one of the applications mentioned above and click on removeRestart the computer
-
Legal notice - change image of banner XP classic logon screen?
I recently discovered how to change the banner of "the classic logon screen" XP up to the top of a logo of my choice, however, before you deploy this change to all clients in my network, I would like to know if there are legal issues with the removal of the existing "Windows XP" banner. Someone at - it any information on that? Thanks in advance.
If you don't know what banner I'm talking about, see this image: http://yfrog.com/5nwindowsxpctrlaltdeletelj
All what you need to do is replace msgina.dll in the folder system32 with a program like reshack (it is safe to use and is free)
Matt
-
I want to put a text on each page with links to a special page that must not appear in the menu bar.
And the second question in the same way is how to have a second version of my site in a different language where the pages do not appear in the menu bar (in french for example when I'm in the English version.
Thank you.
You can choose to click with the right button on a page, go to the Menu Options and select 'Page to exclude Menus '. In this way, you will be able to export this page but not automatically include it in the Widget Menu.
For a multilingual site, I would advise that use you a menu manuals for each language. Please visit: http://multilan.businesscatalyst.com/index.html
Example of Source: http://multilan.businesscatalyst.com/assets/multilan.muse
See you soon,.
Vikas
-
Notice of redirection FF 27.0
I get redirect notice, just started today. Although there is a place to click on the new Web site, when I click it, it simply reloads the notice of redirection. What has happened to a lot of different websites, so it's not the specific site.
_______________________________________________________________________I've already checked the button options 'warn me when websites try to redirect or reload the page. I tried checked and unchecked.
I deleted the cache, deleted cookies, restarted firefox and restarted the computer. No dice. I try next?
Notice reads as follows:
Notice of redirection
The previous page sends you to http://www...If you do not want to visit this page, you can return to the previous page.
Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...
-
Satellite A660 will not start again until I turn safe mode
Just buy the toshiba Satellite A660: I tell the story to compensate closely in my answer, I hope...
I just buy new, run the Setup for first use. When its up and running only in that day, that I noticed it start to hang up when I plugged the drive external hard for some Installer (adobe lightroom).
Its still very well, but when I disable it, it does not start again until I have run in safe mode so I can save some files and rerun recovery.
This time on 64-bit. With its completion of its process, this works well for a few hours.
He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...Now when I turn it off it never early return time windows say... Startup Repair. ..
I have let it run from this morning till now they can't always find what's the problem (I'm refernce the loptop).So no idea about whats goin?
> He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...
64-bit operating system is better if your computer supports 4 GB or more of RAM.
Why? Because 32-bit Win recognizes max 3.2 GB, even if more RAM is available.
It's limitation of 32-bit; regardless of what OS it is; Linux, Win XP, Vista, Win7, etc.
This is the reason why the 64 bit OS are so popular in the last timeWith regard to the issue of the BONE;
I recommend that you run a disk recovery again... This means that you need to reinstall the OS usign the option recovery Toshiba;
During the turning on the laptop press F8, choose fix my computer-> drive HARD recovery -
Re-installation of the operating system on a computer
I volunteer for a nonprofit that takes computers donated by the community and cleans them and provides them with under ideal children and homes for humanity in our local community.
The question came on the resettlement of the original operating system on the computer. How do we go to this matter legally?
Start here: http://www.microsoft.com/refurbishedpcs/programs.htm
-
This is why I hate to let people use my laptop because it was totally fine before, now iv noticed the start menu and the bar at the bottom of the screen with my programs in switched to a classic display, I thought I'd be able to switch back to the updated easily but its doesn't work simply do not! I have properties click on Start menu, then make sure that the top one is enabled then I press on apply, Ok and it's always the same look of the classic view. can anyone suggest what happens?
PS Hope this makes sense (I typed while in frustration)Thanks I solved the problem now, the option I was looking for that seemed miraculously in Control Panel > personalization > change theme. Then I chose the > update the theme< in="" the="" drop="" down="" option and="" applied="">
-
It cannot start a discussion in the section Server VMware...
See attached a screenshot. Notice the 'Start' Discussion is absent?
You can't post at the root of any community. That said, VMware Server Community woes were noted and as far as I know to be worked. From now on, there is no way to go beyond the level of the root. There is no void communities.
-
I get an error message, "Hacks" when the office
Box warning about unauthorized access will appear after loading the driver but before charge of office. can't get rid of it on xp pro sp3
Original title: inherited satellite pro a60
Your added description helps.
This is known as the "legal notice".Change that is to use Regedit to edit the registry. The following article provides instructions to achieve:
'How to activate a warning during Windows logon Welcome Message'
<>http://support.Microsoft.com/kb/315232 >Probably a better way to change that is to use the local policy editor or the Group Editor (start-> Run-> "gpedit.msc")
Instructions to change this way is in the following article:"How to configure Windows Server 2003 to display a message when users log on"
<>http://support.Microsoft.com/kb/310430 >
Note that although this article was written for Server 2003, halfway the page instructions for Windows XP under the subsection titled "Configuring a group policy setting for Windows XP"Deletion of entries of title and the text should remove the notice.
HTH,
JW -
Return to Windows 7 Windows 10
We turned on our Windows 7 computer this morning and the Windows 10 upgrade automatically starts. We DID NOT want to upgrade! When it got to the point to accept or decline the legal notice, we chose the decline. He said it was restoring to Windows 7. It is connected to a network. The user has of worked in all programs for a few hours, then lost the network connection. Print to the network printer was fine. Electronic/Internet e-mail is fine.
We have tried to re-mapping. We tried to go back to a restore point before I did the 10 Windows, but they were all gone, only one point just before restoration and the network connection has been lost. We have tried to return to this point, but still no access to the network. It shows the reader, but with a red X.
I think that happened with one of our other computers a couple of months, but we can't remember what we were doing to get back on the network. Any suggestions?
I was able to locate the original and reinstalled Windows 7 disc. I think we have it especially on the rails. Thank you very much for your answer.
-
Restrict network guest/BYOD
We received a preconfigured router, but it was not configured correctly. Initially, our guest and VLAN BYOD had no access to the internet. I added
access-list 130 permit ip 192.168.2.0 0.0.0.255 any
access-list 130 allow ip 192.168.3.0 0.0.0.255 anyAnd as expected, there are now internet access, but there is also access to our internal network. I need to create a separate roadmap or set up access groups? Where can I I only allow traffic to 0.0.0.0 instead of somehow? Or I need to create deny rules?
Port forwarding does not work, but I'm not sure this is the right place to ask about it.
The config
Building configuration...
Current configuration: 7506 bytes
!!
version 15.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname NAME
!
boot-start-marker
boot-end-marker
!
!
logging buffered 51200 warnings
!
No aaa new-model
!
!
!
!
!
!
!
!
!
!
!
DHCP excluded-address IP 172.17.43.1 172.17.43.75
DHCP excluded-address IP 192.168.2.1
DHCP excluded-address IP 192.168.3.1
!
IP dhcp V pool
network 172.17.43.0 255.255.255.0
router by default - 172.17.43.1
10.15.48.1 DNS server 172.17.42.4 8.8.8.8
Rental 15
!
pool IP dhcp V2
network 192.168.2.0 255.255.255.0
default router 192.168.2.1
172.17.43.7 DNS Server 8.8.8.8
Rental 45
!
IP V3 dhcp pool
network 192.168.3.0 255.255.255.0
default router 192.168.3.1
Server DNS 8.8.8.8
!
!
!
IP Domain.local domain name
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
VPDN enable
!
VPDN-Group 1
! PPTP by default VPDN group
accept-dialin
Pptp Protocol
virtual-model 5
local name FS
adjusting IP mtu
!
CTS verbose logging
!
Crypto pki trustpoint TP-self-signed-436626869
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 436626869
revocation checking no
rsakeypair TP-self-signed-436626869
!
!
TP-self-signed-436626869 crypto pki certificate chain
certificate self-signed 01quit smoking
!
!
username user1 secret of privilege 15 5
password username user2 privilege 7 0
username secret privilege 15 user3 5
username secret privilege 15 user4 5
!
redundancy
!
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2
lifetime 28800!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANSFORMZ
tunnel mode
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANSFORMY
tunnel mode
!
!
!
FMAP 10 ipsec-isakmp crypto map
defined peer 2.3.4.5
TRANSFORMZ transformation game
match address 111
FMAP 20 ipsec-isakmp crypto map
defined peer 1.2.3.4
game of transformation-TRANSFORMY
match address 113
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
Description of the WAN Interface
IP x.x.x.x 255.255.255.0
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
No cdp enable
FMAP crypto card
!
interface GigabitEthernet0/1
no ip address
automatic duplex
automatic speed
No cdp enable
!
interface GigabitEthernet0/1.1
LAN Interface Description
encapsulation dot1Q 1 native
IP 172.17.43.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
No cdp enable
!
interface GigabitEthernet0/1.2
BYOD LAN Interface Description
encapsulation dot1Q 5
IP 192.168.2.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
No cdp enable
!
interface GigabitEthernet0/1.3
FSS-comments LAN Interface Description
encapsulation dot1Q 6
address 192.168.3.1 IP 255.255.255.0
IP nat inside
IP virtual-reassembly in
No cdp enable
!
interface virtual-table 5
IP unnumbered GigabitEthernet0/0
ip address pool peer default PPTP-POOL
PPP encryption mppe auto
PPP authentication ms-chap-v2
!
local IP PPTP-POOL 10.20.100.1 pool 10.20.100.254
IP forward-Protocol ND
!
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP nat inside source map route SHEEP interface GigabitEthernet0/0 overload
IP nat inside source static tcp 172.17.43.7 1194 x.x.x.x extensible 1194
IP nat inside source static udp 172.17.43.7 1194 x.x.x.x extensible 1194
IP route 0.0.0.0 0.0.0.0 5.5.5.1
!
!
SHEEP allowed 10 route map
corresponds to the IP 130
!
!
access-list 1 permit 172.17.43.0 0.0.0.255
access-list 23 allow 3.4.5.6
access-list 23 allow 5.4.3.2
access-list 23 allow 4.3.2.1
access-list 23 permit 172.17.43.0 0.0.0.255
access-list 23 allow 8.7.6.5 0.0.0.1
access-list 23 allow 7.6.5.4 0.0.0.1
access-list 23 allow 9.8.7.6 0.0.0.1
access-list 111 allow ip 172.17.43.0 0.0.0.255 10.15.48.0 0.0.0.255
access-list 113 allow ip 172.17.43.0 0.0.0.255 172.17.42.0 0.0.0.255
access-list 130 deny ip 172.17.43.0 0.0.0.255 10.15.48.0 0.0.0.255
access-list 130 deny ip 172.17.43.0 0.0.0.255 172.17.42.0 0.0.0.255
access-list 130 allow ip 172.17.43.0 0.0.0.255 any
access-list 130 permit ip 192.168.2.0 0.0.0.255 any
access-list 130 allow ip 192.168.3.0 0.0.0.255 any
!
control plan
!
!
Banner motd ^ CCCCC******************************************
* LEGAL NOTICE *.
******************************************Bonneau
^ C
!
Line con 0
local connection
line to 0
line 2
no activation-character
No exec
preferred no transport
transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
access-class 23 in
privilege level 15
local connection
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
local connection
transport input telnet ssh
!
Scheduler allocate 20000 1000
!
endHello
You must use the access list 130 to control traffic between your internal network and the network BYOD. Create another list of nat access.
Thank you
John
-
IOS App rejected that they need to be clarified by using "NSLocationAlwaysUsageDescription".
Apple
- 5 LEGAL 1.5: STAFF - LOCATION SERVICES privacy
Legal notice - 5.1.5
We always found that your application uses background location services but does not clarify the purpose of its use in the modal alert such location required in the iOS Human Interface Guidelines.
Specifically, we found that in the modal alert that displays after us:
1. start the application
2. press the button "use my current location".
3. modal alert appears asking background location without a specific purpose of use.
We attached screenshot (s) for your reference.
Next steps
Please review the NSLocationAlwaysUsageDescription value in the info.plist file to specify the destination to use the location of the user while the application is in the background.
Resources
For more information and instructions on setting up and presenting an alert, see the section Application of Permission of iOS Human Interface Guidelines and the key reference, list of properties of the Information.
Next, you define the key referred to by Apple and describe its use to the user of the application.
Use
Please, allow GPS at all times, enabling this app to send your current location to our all mighty database continuously. We promise not to share your location data with others.
-
The trouble with lawyers?
I recently downloaded Acrobat XI of the creative cloud. I am a member. To install it on my iMac. When I boot it, a screen will appear asking me to approve legal notices. It's in the MAA. But there is no text in the Panel. When I click on "Approve" nothing happens. Have left me it this way at night, then, really, nothing happens. When I click on 'Cancel', Acrobat is closed.
I have tried unistalling Acrobat and replace. Same deal. Tried to trash AAM and re - download. Ditto.
Really, I have no problem with the exculpatory clauses. Please, let me start my program!
"Fixed". Here's how:
-uninstalled Acrobat
-find all the files associated with MAO and trashed the
-reinstalled AAM
-a been able to reinstall Acrobat. Unfortunately, now AAM shows all other CS6 programs ready to be installed, even if they are already installed on my HD sensation that can come back to bite me later...
-
AS2, popup with javascript in an Isot html <; a >; tag
Hello guys,.
You could helo me with a little problem I have.
I m tried using an < a > tag in html content in my code to make a connection. So far work perfectly. Problem starts however when I try to use javascript in the < a > tag to create a popup window. Here's the line of code.
CT.content_right.htmlText = "< a href ='javascript:popUp('impressum.html')" > '+' legal notice '+' < /a > < br / > ";Can someone help me realize my pop-up window?
Thank you very much in advance.use:
CT.content_right.htmlText = ""+"imprint"+" "
"
Maybe you are looking for
-
Updated by Satellite Pro L450 with SSD
Any advice on installing a SSD 128 GB in place and place of the hard drive, use this for the operating system (Windows 7) and put the old HDD in the optical drive slot to serve as storage. Is this easy to do on this model, and a new facility would be
-
123A 550 office: 3 days old 550123a desktop freezes
Very sad moment. Its the last 3 times that ive used frozen it re do not respond to the keyboard or the mouse. Only way to turn it off is to pull the power cord from the back. I downloaded office 2010 home edition yesterday and he himself has upgraded
-
How can I connect 2 monitors for a Pavilion p6 2120 Windows 7
How can I connect 2 monitors for a Pavilion p6 2120 Windows 7
-
Application Java porting to webworks?
Hello We can port java app Blackberry webworks?
-
Install file LIVE BAR in the BB Tablet
Hi all Please help me if someone has an idea. I need to install direct queue bar in Blackberry tablets? I can install it like COD and Jad file located in the smartphones of BB. Or can I push bar file through BES? In the affirmative, please let me kno