Legislate that I connect with my desktop of my laptop wireless printer?

I know I should be able to print from my laptop, I just forgot how to share with my office. Please help me. Thank you.

Hello

I suggest you to go through the steps mentioned in the link and the Coachman.

Share a printer

http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

Video: Sharing a printer at home

http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-a-printer

See also:

Install a printer on a home network

http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

Hope this helps and keep us informed if you need help.

Tags: Windows

Similar Questions

  • BlackBerry Smartphones trying to connect with the desktop software for my blackberry

    Hey, M trying to connect with the desktop software for my blackberry torch 9800 and it asks password for the connection. I am using same unlock password I use for my bb but for desktop sofware it shows incorrect... pls help!

    Make sure that you type on your BB, it's what you type in DM. don't forget that the keyboard on your BB is different from the keyboard on your PC. Some people think they are type numbers on their BlackBerry when they are really typing the letters. For example, to use numbers on a BB you must hold the ALT for each button, you push so you have to hold the alt key while typing 1 2 3 4. If you hold down the ALT key on the BB you would really be typed all W E R S. sometimes, people will hit the ALT key once (and not hold the button) before they enter the password and then you get 1 E R S.

    Who is? Make sure that you do not mix numbers and letters.

  • Command BACK to find the MAC address of the computers that are connected with any windows Server

    Y at - it a DOS command to find the MAC address of the computers that are connected with any windows Server

    Usually, net view command is used to display computers on a particular network.

    To find the MAC address, it is best to ask the question here:
  • BlackBerry smartphones this software allows us to connect with blackberry desktop

    Hello. What this software allows us to connect with blackberry desktop? For example, we use for samsung phone samsung kies. Please advice.

    It's the Blackberry Desktop Software. You can download it by visiting the link below.

    http://us.BlackBerry.com/apps-software/desktop/

    Ron

  • I can't connect to the internet on this laptop wireless

    Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please.

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/870702

    It will be useful.

  • Here is the configuration I am unable to share a HP 3930 printer that is connected to a desktop computer Windows 7 64 - bit to a 32 bit Vista laptop

    I enabled sharing the printer and I do not use password protected sharing.  I am able to open shared files from one computer to another.  But when I try to connect to the printer I get the following message "unable to connect to the printer. Make sure you typed the name correctly and the printer is connected to the network. "The printer is offline.  I plugged the printer two computers so that pilots would download and install. And in the number of firewall I have disabled them in order to try to get this working.

    HP Support & drivers - go to the site Web and download/install the drivers and utilities for Vista 32 bit HP.
    http://welcome.HP.com/country/us/en/support_task.html

    Share the printer on the Windows 7 computer. Go to the Vista machine, then install the drivers you downloaded. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers. If the regular installation does not see the printer:

    Go to the Windows 7 machine. Note the name of the computer that you will get to the control panel > system > computer name. Now in the Panel, go to the printers. Find the printer in question, right-click, and then click Properties. Note the name of the share. Of course you must have already set up file sharing / print on all computers involved and share the printer.

    Now go to the machine Vista, control panel > printers > add printer

    Click Add a local printer. Click on create a new port. The default value in the drop-down list box is Local Port. Don't change that. Click Next. A dialog box appears for you request that you enter a port name. Type in the \\FullComputername\SharedPrintername

    ex: \\mycomputer\HPDJ (that's why you wrote the names of computer and printer in the first step)

    Click Next. In the manufacturers list, select the correct printer manufacturer and the correct printer model in the Printers list. Under "do you want to use this printer as default printer select"Yes"(if you do!). and click Next. When asked to print a test page, select 'Yes', then finish.

    MS - MVP - Elephant Boy computers - don't panic!

  • Can I connect my printer on both a desktop and a laptop wireless?

    I have my Photsmartf HP Premium printer connected to my Compaq desktop computer via a USB connection.   Also, I have a HP laptop with wireless and wonder if I can hang it up to the printer using the wireless connection?  Can I use the two types of connectivity with the same printer?

    OK, at the front of the printer: Setup > network > Wireless Setup Wizard.  Run the wizard to connect the printer to the network.

    Then, delete all instances of the printer on your PC (start > Control Panel > printers).  Then, add the printer in this way:

    1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
    2. click on > start > Control Panel > printers.
    3. click on add a printer
    4. Select local printer
    5. Select create a new port and select Standard TCP/IP Port, and click Next.
    6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
    7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
    If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
    8. If prompted, use the driver that is currently installed.
    9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
    10. we may ask you to share the printer. Choose No.
    11. the printing area of Test Page is displayed. Go ahead and print it out.
    12. click on finish.

  • I am not able to connect a remote desktop from my laptop computer.

    Remote Desktop connection problm

    I am not able to connect to a remote desktop from my laptop with Windows XP Professional service Pack 2, but at the sametime I can access the remote computer from other laptops. I tried manythings but it doesnot work.can someone help me? Thank you

    Hello

    Is there an error code or the message that displayed when you try to establish the remote desktop connection?
    Try it out below mentioned methods and check if this may help solve the problem.
    Method 1:
    Check out the link and follow the steps.

    Installation Windows XP Remote Desktop Web connection
    http://support.Microsoft.com/kb/284931
    Method 2:
    You can also visit the link below and try the methods in the article.
    How to use the Windows XP Professional Remote Desktop feature
    http://support.Microsoft.com/kb/315328
  • Troubleshoot the bad connection with router (WRT350N) and Point (WAP4400N) wireless access

    Hi all

    I have a problem and will apprecaite all the help I can get. I think I will find an answer here.

    I have a small network, Linksys WRT350N (wireless router) attached to a modem and then connected to a desktop computer and with 3 wireless laptops connected to the router. All 3 are really great to work and access the internet very well.

    Currently, I have the need to expand the network to 3 floors, so I bought 3 Points of access wireless of Linksys (WAP4400N).

    I ran 3 cables CAT5e cable from the router and which ends individually all 3 floors, the top floor is less than the router 40meters. With the cables that came in their boxes, I connected the APs to the router and I have correctly set up the 3 Access Points with them attached to the router, all 3 works perfectly (I can access wireless internet via 3-point). However when I take the points of access to the upper floors and connect cables cat5e APs no longer work but connect after some time with the message "limited connectivity".

    Why can I connect when the APs are connected to the ground floor via a short cable that came in the box and not when it is connected to put cables from the ground floor to the upper floors but rather make the "LIMITED SERVICE" message and cannot connect to the internet.

    Also if I connect the cat5e cables directly to a laptop computer on all the floors, I can connect to the internet (the work of cables fine when connected directly to a laptop computer), but when it is connected to the connection of the APs has failed and I begin to see strange IP addresses from the APs.

    Oh, one more piece of important information: when I connect cables CAT5e cable on all floors direct to a laptop I can connect to the internet (the work of cables very well when it is connected directly to a laptop) but when connected to the failed to connect APs and I begin to see strange IP addresses from the APs.

    HEPL!

    I think I have the forum a status report on my post. As I mentioned in my last post, the problem has been as a result of lower cable at my provider. The network is running smoothly. Has been in place since last week when I replaced the lower quality cat5e cable cat5e cable.

    A Board here please be careful and make sure you complete the cable. A bad end can lead to connection problems I discovered in this case when my team confidence terminated cable incorrectly.

    Network up to & operational: Linksys WRT350N router without wire + 3 Linksys Wireless Access Points WAP4400N + Modem providing access to (1 computer (cable), 6 workstations (wireless), & 5 laptops (wireless).) Network to grow shortly.

    Thanks to everyone who helped make this project a reality.

  • How to share internet connection on my desktop to another computer wireless desktop through a router

    my computer has wireless PCI card, and my wife is not wireless, so I will try to share my internet connection the router belkin play wireless I have, but I think I'm doing something wrong because it receives no internet, we both desktop

    You have direct access to the wireless router that you connect first with?

    Most routers should have standard LAN (Ethernet) ports that you can run a cable to the computer of your wife.

    Or you can add almost any USB wireless adaptor for your wife's computer, as long as there are XP, Vista or Windows 7.

  • Everyone in the House can connect wirelessly with the exception of my laptop wireless

    Original title: Mr. gustavo

    Hi can you please help me, everyone in the House are connected to internet wireless lapto, Im the only one can not get internet connection with my wireless lapto, can you please advice me. Thank you very much.

    Rigards, gustavo

    Hello

    ·          What happens when you try to connect to the network?

    ·          You get the error message?

    Method 1: Try the procedure described in the following article:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Method 2: Reset the TCP/IP settings:

    To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  • After connecting a new router to Talk Talk, WIRELESS printer will not print.

    Original title: network programs network networking Internet website URL website troubleshooting Web page

    Just plugged a new router to Talk Talk, can I do something with my WI FI printer such that it will not now print?

    Hi Pamela,.

    1. what happens when you try to use the printer Wi - Fi?

    2. you receive messages or error codes?

    3. What is the brand and model of the printer?

    This problem may occur if all the printer settings or your router then reconfigure to communicate with the new router.

    You'll be in touch with Talk-Talk help or support from printer manufacturer to check the same.

    Router connection TalkTalk settings - help

    For more information, see the article:

    Install a printer

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • HP Pavilion 15 laptop: wireless printer connection

    I have HP Pavilion 15 Notebook PC I want to use it with my wireless printer. When you try to print a message arrives and says denied because I'm on a metered connection. What is a connection counter?

    Hello

    A connection counter designed to limit the use of data to avoid charges.

    You can disable this by following the section "How can I change my current MDI (or non-dosed) network connection?" below:

    http://Windows.Microsoft.com/en-my/Windows-8/metered-Internet-connections-frequently-asked-questions

    Shlomi

  • HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

    I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

    HP Photosmart all-in-One Printer series - B010

    MacBook Pro / 10.8.1 (Mountain Lion)

    Router

    Hi yadin7,

    The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

    You can find the specifications listed below:

    Input/output
    USB port: Rear hi-speed
    

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

    Kind regards

    Shlomi

  • Equipment does not respond when connected with the desktop remotely

    Hello

    I have a PC with labview controlling a power supply via a serial connection. It works fine, except when I am looged in remote to my PC from another PC lab via desktop remotely. The VI runs correctly, but does not have the equipment to receive orders. Why would it be?

    Thank you

    Guillaume.

    If you have configured, the remote computer might try to use the serial port on the computer you're remot desktopping of.  Carefully go through the remote desktop settings and make sure that you are not telling the remote computer to use local ports.

Maybe you are looking for