Lenovo B5400 CPU update

Similar Questions

• Lenovo G580 CPU update

  Hello community, I own a lenovo g580 20150 with a processor of 2348 m i3, I now want to upgrade to an i7, but I know not model i7 witch my motherboard supports, the chipset is intel hm76 and decision-making is G2, practically, it should work, but I'm not sure. I searched for this model of laptop, but I did find this CPU model in the data sheet in order to be sure that it will be ok. I hope that you will be able to help me...

  Hi PatriciuxD,

  Thanks for the reply.

  After some research on this model, I discovered that this model can support up to i7 3612 QM you can refer to the Service Manual of the material.

  Click here to see the manual maintaince of equipment and the number of page 101.

  I hope this helps. Post back if the problem persists!

  Best regards

  Ashwin. S

• Lenovo N500 3000 CPU update (4233)

  Hello

  I have to install Windows Server 2008 R2 on the virtual machine, but unfortunately my lenovo has cpu T5800 supporting VT so I want to upgrade to a processor that works with this laptop and support VT what processor to buy?

  My laptop specs:

  CPU: T5800

  CPU Socket: Socket p (478)

  Motherboard Chipset: PM45

  RAM: 2 * 2 giga FSB 667

  My laptop also has a discrete graphics card: Nvidia Geforce 9300 m GS

  Thank you

  VT normally requires surport bios level.

  You'd better all the all the cpu that came in the series and the bios here as to what they had

  otherwise the cpu works, but wont surport this feature or it used surport the cpu at all.

  There is no way to know what bios surports to let what cpu in laptop computers.

  normally full of features cpu come in the high-end models and the bios there reflect this.

  normally, you cannot take a cheaper model and update without custom bios.

• some problems in vibe lenovo shot after update

  Vibe Lenovo shot after update to 6.0.1

  -When I open the VIDEO program opens file manager program.

  -The USIM toolkit does not

  -The battery was quickly released.

  has this problem after update

• Tab Lenovo S8 - 50 update fails: S8-50F_s000214_150629_ROW

  Tab Lenovo S8 - 50 update fails: S8-50F_s000214_150629_ROW. Photo below shows the results. The first 1 is Smart Assistent, 2nd lessons is to manually find the update.zip but yes...

  

  Well, nvm. I installed a XDA stock version and it's all working again.

• HP Media Center a1560n CPU update

  Hello people, try to change the processor of my product from HP HP Media Center a1560n #: EX278AA that came with an Asus Mobo. L5LP-(Leucite) is NOT an Emery nor a Leonite or a Lithium battery. The original processor is an Intel Pentium D 915 @ DC 2.80 GHz/800 MHz FBS / Socket 775 / 4 MB L2 Cache / Max TDP 95W. The (945 G Chipset) Mobo very good posts with this installed processor, once I have placed my other CPU a GHz Intel Pentium D 840 Extreme Edition @3.2 (Smithfield) / 800 MHz FBS / Socket 775 / L2 Cache of 2 MB / Max TDP 130 w turns on all fans but not post. (Note fans never descend form high rpm, as they do with the other CPU). R & R'ed CPU several times without any difference. 915 POST but 840 not. The HP product description says that the 800 series is an acceptable upgrade processor.  I just updated my BIOS of 3.15 to 3.19, thinking that this would settle it with no joy. Is it because my CPU is one extreme and not a CPU 800 series regular or due to the difference of PDT?  I'm sure that I have a (Leucite-GL8E) Mobo from Leucite because I compared all different Mobo of the Mobos L5LP-EL choices and the Leucite is an exact Visual match from the photos of product description, and it is one that is under the description of the product for my product to 99.99%. Where the other boards (Leonite, Emery and Lithium) have some obvious differences like chips, etc. The photo of Leucite has all the chips and parts just like my Mobo. This is 840 CPU compatible with this motherboard? Thank you all for your time.

  Luis, welcome to the forum.

  Here are the Specifications of the motherboard.

  I think you put the problem on the head.  You put new technology in old technology.  The computer is 7 years old.  There is a good chance that the extreme version is too powerful for the motherboard.  The specs do not mention the TDP, so we cannot necessarily determine whether it is part of the problem, also.  I don't think that we were still talking of TDP in 2006.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion g62-B50SA: Hp Pavilion g62-B50SA CPU update

  Hello

  I am looking at upgrading the processor in an i3 i5 or i7 laptop, I was wondering if someone had done before, if it's the same penalty, and if no problem of massive heating were casued by intorducing a more power hungry CPU. common sense tells me that an i5 would be nice, but if I can go out with an i7 I wouldn't complain. Although I'm not sure that the rest of the system would really have this treatment a lot more capabiltiy so an i5 would be probably more cost-effective. any help would be appreciated

  Here is the Service Manual:

  Your manual

  The top of the page compatible processor is:

  CPU i7-620 M of Intel Arrandale™ (total 2.66 GHz, 4 MB L3 cache, 1066 MHz) - Dual core 35 W

  You have an i3 - 350 M. The thermal system is designed to manage each processor and the absorbed current is the same at 35W. You would go to 2.26 ghz with a cache of meg 3 to 2.66 ghz with a cache of meg 4; probably a 40% increase or more in processing power. The i7 is going to be about $40 on eBay and an i5 only a little less, so if you do the upgrade I go for excitement and get the i7. However, the first generation Intel Core is getting a little long in the tooth. No usb 3.0, no SATA-III, bad heat/power management, etc. If you can make the update yourself and the manual shows how, then for $40 it might allow you to use the laptop for a little longer. Do not underestimate the difficulty of the upgrade, however. If you need assistance after return.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Lenovo G550 CPU upgrad P7570 or P7370

  Hi I was wondering if it would be possible to upgrad the CPU of the laptop to P7370 or P7570, I looked on but CPU Spec list that has exceeded the P7570, it's the same as the P7550 but with VT enabled and P7370 will be the same as the P7350.

  the P7X70 processors are not on the list and is a confirmation of lenovo if they work or not before you buy.

  
  

• Lenovo P780 system update does not work

  Hi all

  i, m using Lenovo P780 4 GB

  at the present time the OS P780_ROW_S115_130807 worm

  4.2.1 Android

  I try update day but not workin after I download the update I chood update now, it will restart but nothing happen is like restart as usual, the update does not show

  any idea or not can do to update?

  Ok... You are grounded. Have you removed all the apps system? If you have done which causes the failure.
  Did you also change the replenishment of stocks?

  In this case, the best way to go is to factory reset the phone and try again to OTA update. (If you have changed the rebuilding of inventories with a recovery of CWM or TWRP, factory reset will not help). You can also try the smart Wizard after the reset.

  Important: Please ensure that the download and dosent of process (update) install get interrupted!

  Let me know how it goes.

• Lenovo G470 graphics update

  My Lenovo G470 graphics card can be improved? If yes where? Thank you

  I don't think it's possible to update the graphics cards.

• Compaq presario cq62-219wm cpu update

  We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible. How can I find a list of processors that can I update? the model number is WQ778UA #ABA. the serial number is *. any help would be appreciated.

  davidljtn44

  You can virtually none of the PENRYN 45nm lithography processors put in it, the optimal processor, you can upgrade is the Intel core 2 duo t9500. I have the same laptop and I have the next step down from what is the Intel core 2 duo processor t9300. There is no complete list of the processors that it will support the lists that you will find are incomplete at best even Intel does not update their information. Go to intel.com and search PENRYN in a search more people you can use, you need to compare to ensure that.

• Error code: 8007000D when running Windows 7 on a Lenovo 200 - Windows Update is not running automatically.

  I'm running Windows 7 on a Lenovo s 200 and Windows Update does not run automatically.  I manually installed the preparation tool to update Windows (KB947821) and KB978258 but no fix has worked.  Any help would be appreciated

  0X8007000D ERROR_INVALID_DATA

  Suggestion: 8007000D - Error_invalid_data.  Corruption in the folder C:\Windows\SoftwareDistribution.  Rename the folder % windir%/Softwaredistribution.

  TaurArian [MVP] 2005-2010 - Update Services

• Lenovo A6000 OTA update error (status 101)

  Hello

  I updated my lenovo Kraft KitKat A6000 - A6000_S054_150915 as my phone has suggested. Everything is fine, but then it shows the new Kraft-A6000_S061_160727 version. I have download, then it reboot. But it shows that the instalation was dropped, beacause then your phone not changed carriers and cannot be upgraded. ", then the text will appear: 101 status. All solutions?

  Thanks for your replies! But the problem is solved. I downloaded the latest version (S061) and with recovery flashed only system.zip. (This is the part of tho rom when you unpack it. For those who don't know that and have the same problem). and it works perfectly now. But I still very wrong way on Lenovo as a society and my mobile. But it's a long story... Goodbye and thank you.

• Svchost.exe (netsvcs) 100% cpu - update of Windows *.256 cause - update forever checks as does Defender.

  Hi, I got 100% usage cpu choking my system Toshiba laptop L300 Vista 32-bit, cause - (netsvcs) svhost.exe in time real trouble was unknown and tried everything has failed. So I did a complete new installation and fully updated to SP2 then the next update and it required me to download the latest update to terminant.256. My system is now unusable with constantly check and update svchost.exe using 100% cpu. All is well until I start to WU and I restore prior to this Windows Update Agent... Also if I close just the update it is still short in the background using 100% cpu by svchost.exe (ntsvcs) until I have manually stop the service.

  I have:

  Disabled Windows Firewall and Avast antivirus.

  I tried all the things as well in safe mode.

  Installed costs.

  Followed the instructions found on the net

  In offline mode, downloaded and installed the latest update which is the same as that.

  Whenever I have restore before this update, it works very well. The download of the update even if I have restore and install only the off-line version, it cripples even with 100% cpu and without end of audit. He made also Defender without end of audit.

  How to fix something that is a solid wall. You cannot uninstall or go around it. If I restore before it, that's all I can ever be updated Vista.

  I admit, I'm going nuts with this thing. I can't be the only one, it is 100% Windows update agent question.

  They have started to issue updates, default update clients cannot manage. Under Vista, install all the missing updates listed in the table above to this page:

  http://Wu.krelay.de/en/

  On Windows 7, install KB3172605.

  KB3172605 32-bit

  KB3172605 64-bit

  Best regards, VZ

• Important notice - please put Lenovo Solution Center update

  Lenovo has released a new version of the application (LSC) Lenovo Solution Center v2.4.003 which addresses a number of potential problems and bug fixes, some of which could adversely affect the performance of your system.

  (Newer versions can be released since - just follow the link to get the latest version.)  The point of this pinned post is to alert users that you can be stuck on a version that would not automatically update correctly, and we wanted to communicate that number and in the chronology of the version where it is fixed)

  Many of these issues have been discussed elsewhere in this forum.  It is highly recommended for all users upgrade to this new version as soon as possible.

  Some of the problems that it solves understands that:

  • Excessive event log records
  • LSC_CLI.exe crashes
  • Excessive User Account Control (UAC) invites on limited user accounts
  • Many other bug fixes have been implemented

  Most versions of LSC will prompt to update themselves when newer versions are detected.  There was a bug in the version 2.2 which affected the ability of automatic update - it would download and appear to be updated, but could not actually complete the update.  This problem has been corrected in version 2.3 or later, but the customers who have version 2.2 should download and update to fix this problem manually.  In order to be proactive, Lenovo adding the last versions system update catalogs to provide another automated way to update the clients that can still be on version 2.2, but some customers cannot make use of updated system, or may have chosen to not install the LSC if offered updated package.

  Visit LSC on our support site to download the version for your OS or if you have already installed LSC and icon appears in your toolbar, please launch and allow it to check the updates.

  If you go to the link provided by brand, you will always have the last ICL:

  ""Go to the LSC on our support site to download the version for your OS or if you have already installed LSC and the icon appears in your toolbar, please launch and allow it to check the updates. ""

  I hope this helps!