Lenovo C320 - touch screen does not
I just bought a new essential Lenovo AIO C320 series last week.
And since the first day, I was not able to use the touch screen feature.
The driver is installed but when I touch the screen it does not record anything.
I get the calibration screen also but no tactile response.
Ask your help for the same thing.
Thanks in advance
Tags: Lenovo Desktops
my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?
I downloaded the former driver of windows 7 touchscreen and it worked
My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?
The following information is taken from the HT201406 of the Apple KB article:
If the screen of your iPhone, iPad or iPod touch does not respond to touch
If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.
Check your touch screen
Make sure your hands are clean and dry, then try the following steps:
- If you have a case or a protective screen on your device, try removing it.
- Clean the screen with a soft, slightly damp, lint cloth.
- Unplug your unit.
- Restart your device. If you are unable to restart it, you can force restart your device.
Adjust your settings for tactile 3D
If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:
- Go to settings > general.
- Click Accessibility > Touch 3D.
- Then set the sensitivity of the setting.
Get more help
My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.
The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).
I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.
Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.
On the page of the Toshiba UE driver you can find drivers for Win 8.
As far as I know that you will install the Toshiba display driver for the touch function works correctly.
I found this driver.
Please check if you can install this:
[Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]
My touch screen does not work after update of windows 10 in Chrome. How can I fix it?
Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.
Sometimes the touch screen does not work or malfunctioning, as does replacing the system and continues. When it crashes I have to suspend the Tablet and wait a bit, sometimes I have to play several times to select what I want. Anyone know what it could be?
Have a Toshiba Encore 2 WT10
You said; you have already changed the system.
What did you change? The ENCORE 2 WT10-A-102 was pre-installed with Win OS 8.1.
Also, I guess the problem described is related to busy BONE.
Probably too many applications (apps) as well as the process running in the background and this could lead to short a few drop-outs or performance problems.
The touch screen does not appear or appears with vertical bands of color. Power switch; WiFi; Open on the front buttons do not work. It will be printed from the computer and printed the test page. After it printed the test page, it stops and will not respond to the buttons on the front, but will always show from the computer. I unplugged and plugged back in after waiting for 30 seconds.
If it is not under warranty take it. Buy something else.
My computer model is SVF15215SNB Touch screen does not work and it says no. Pen or touch input is available for this view kindly let me know the solution to address the issue
It seems that the model number you provided is not a model for us.
This Forum is for help and support for the products of Sony us.
For assistance, please contact Sony support team in your area for the best support!
Sorry for the inconvenience!
I upgraded my HP TouchSmart tm2 notebook Windows 8 tot Windows 8.1. Now my touch screen does not work, when I touch an app. Also my touchpad do not work. There is no problem when I we an external monitor (without touch screen). I received a message that Assistant HP app is not compatible with Windows 8.1. How to solve this problem?
Unfortunately, there is no support for the applications of the touchscreen or devices to your laptop under Windows 8 or 8.1
This is the touchpad for Windows 7 software
You can try to install mode of compatibility in this solution provided by Member AttackofZaq
I've recently updated to windows 10 and my touch screen does not work. I believe that the driver is no longer installed. Any help would be great.
Best of this post in the forum Windows 10 here:
I have all in one, my touch screen does not work. I have Windows 7 How do I work?
or by post to this community to get help.
After searching for and buying touch screen FT200HQL, it does work with my HP Pavilion laptop dv7-5000, Windows 7, 64-bit. I have the USB cable is connected (even if it says that it is optional in user's Guide - not an option if you want the touchscreen to work). I tried it with an Acer, Gateway and an another HP Pavilion laptop (all Win 7), & it works perfectly with them, but not w / mine. All my drivers are up to date. (Although there is not driver site Acer for the FT200HQL for Win 7 & I don't think that what they have listed as a driver for Win 8 is a pilot). A Microsoft Search to ensure the compatibility of the FT200HQL compatible shows and there's nothing I should do. Help, please! I really like the monitor & don't want to send again, but I bought it mainly for the touch screen feature.
Thanks for posting your question on the Microsoft Community.
I would like to know some information about the problem so that we can help you better.
What version of Windows 7 is installed on your computer?
To check the version of Windows 7 is installed on your computer, please use this link:
Operating system Windows am I running?
You can then check the hardware compatibility of the touchscreen with your laptop device.
See this link:
I suggest you to update the graphics card, and chipset drivers from the manufacturer's Web site.
Use this link:
I also suggest you to install the Vista driver in compatibility mode.
Remove and reinstall this device in the Device Manager. To do this, use the following steps:
a. right-click on the executable/program of the driver installation file, and then select the Compatibility tab.
b. click the checkbox before you run this program in compatibility mode for option, and then select Windows Vista from the drop-down list. then try to install the device driver.
A touch screen does not work properly after that you resume a computer from sleep mode Windows 7
I hope this information helps.
Please let us know if you need additional assistance. We will be happy to help you further.
as mentioned in the subject
am having a problem with my torch 9800 sensitivity to the touch screen does not work. I tried formatting than her apps, but still nothing is happened
also it restarts automatically several times and it is the fact that it is difficult to do something to solve the problem of the screen
Please I need your help for this problem
Try a battery pull if you please, with the BlackBerry device powered on, remove the battery 15 seconds and then reinsert the battery to reboot the device. This will clear all hide as restarting a PC. Then try again and see if the problem persists.
What OS are you on? On your device, type a new message MYVER and a space after to see and report please.
On device, go to Options, device, application management is a great way to see what your applications with your use of the CPU on Smartphone. Simply drag bar greater than CPU and see what happens. Also touch the CPU menu to see other time variables. I discovered that an application has been eroding CPU cycles on my own
Disable Compression on the memory card? go to Options, device, storage
using a custom theme? Try it for a day that factory by default to avoid your theme
remember the ESC key to close most applications, with the exception of GPS and some chat clients. other applications must use the menu and then exit or close. The key furthest to the right is a key to the House and does not close on its own apps, but will put an end to the calls.
If the above does not work then maybe in running a new OS is in order.
Manual device OS upgrade instructions:
1. start by searching for your operator and the system operating file that you want to use.
2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."
5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6
6 remove the internet connection for PC and reboot the PC.
7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.
8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339
Take advantage of the new operating system.
If after all this then maybe you have a problem with your device and will need to contact the place of purchase if under warranty still.
good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy
my / Tablet PC
Thanks for posting your query in Microsoft Community.
I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;
- When was the last time that the two have worked?
- Remember to no particular change in the device before the show?
- Since the touch screen does not work, you are able to use the options settings?
The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.
Method 1: Run the troubleshooter of material and check if that helps.
a. type in the right edge of the screen, and then click Search.
(If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)
b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.
c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.
Method 2: Update the drivers
Step 1: Update the driver through Device Manager
a. press the Windows key + X , and then click Device Manager
b. expand driver Sound
c. make a right click driver, and then click Update driver software
Step 2: Install the Windows updates pending
To check the updates:
Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.
Press or click check nowand then wait while Windows searches the latest updates for your PC.
If updates are found, tap or click install updates.
Read and accept the terms of the license and then press or click Finish if the update requires it.
Restart the computer for the updates to be applied.
Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.
You can also check: touch and pen settings: FAQ
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
With the help of Windows 8 and a few apps would stop working and go back to the start screen. So I ran the "Refresh your PC w/o affecting Files. He removed most of my programs (Norton, Microsoft Office, among others) and now my PC HP TouchSmart 320, touch screen does not work. How can I recover my programs and get the touch screen to respond as before I 'Refresh '?
HP may not have a driver Windows 8. In general, manufacturers like HP allow the upgrade (and cancel you guaranteed if you do). They want you to buy new hardware.
You might be able to install the driver by right clicking on the installer, and then select Properties. On the Compatibility tab, change its operation under Windows 7. This tent to fool the installer in the work.
It worked for my graphics card, the latest version of it was for Vista (my computer came with Vista), but I was able to continue to use this graphics 7 and 8. Your results may vary if it depends on how HP built their driver.
Maybe you are looking for
I have a mac pro 3.1. How can I transfer the system to a new and bigger drive? The old drive is much too small.
Hello guys,. It is possible to upgrade the processor (cpu) on the HP DV7-6135dx laptop with change of Intel Core i5 - 2410M Intel Core i7 (to any model)? It's motherboard can support or not? Thank you
Hi, I have an iMac and am trying to use a condenser nw-700 Neewer with her microphone. I have a ghost (an Innogear IG101) supply and it IS lit. I have the microphone connected to the power source via an XLR cable, then the power supply of the outputs
Hello The descritption of LabVIEW Robotics Module has this line: "Tools for importing existing code in C/C++ and VHDL. Is this something new in the Toolbox, or is - this referring to the standard function available in the basic package? I wasn't able
When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".Cure please!