[Lenovo Edge 11] Disorder of the migration of a HDD to SSD

Good evening everyone,

I currently own a Lenovo Edge 11 "Intel, that I wanted to spend by exchanging the HARD drive-slow down-stock nine DSS and I'm stuck when I try to restore the image from a USB key.

This stick contains the recovery image made with the ThinkVantage recovery media in the ThinkVantage Toolbox.

First point: I did not abandon car stock data, it is still able to boot the system.

Second point: I installed the SSD drive, plugged my USB with the recovery image, press F12 and chose this... and nothing, just a message "error loading system.

I thought that my recovery image can contain something wrong (although I have follow-up Assistant and left ticked both boxes check to create a bootable disc and copy music Q :), I mounted at the back of the hard drive and tried to make a system image.) But the utility boot me as he tells me that I already have my recovery image.

What should I do now? Thank you for your advice.

Concerning

Hi people!

Finally, I can deal with my migration from the HARD drive to my new SSD. Given that I bought a few quality brand blank DVD again (something that I did not long ), I could re - issued a new set of recovery DVDs (all three, the trunk and the two required for the score).

In fact, it loads its content on the SSD.

So far, here's what I did:

0) back the stock hard drive inside the laptop and the old windows startup

(1) reset the file done.ini to be able to re-launch the process of creation of recovery media

(2) mount the SSD in an external case and start a portable Flash DRIVE containing my Ubuntu distro

(3) launches gparded and get rid of linux partitions I did on the SSD, so all the space is stayed "unallocated".

4) start on recovery media

(5) allow the system to restore the computer as he should have done with the first attempt on a USB key.

What I keep as a lesson to all that is:

(1) DVD are more reliable than the issuance of a USB drive as a recovery unit. Perhaps the process has been modified and improved.

(2) Lenovo could save time user and give directly the recovery media. Come on, 3 DVDs are not that expensive, Asus even do!

Thank you guys for your support and advice. .

Tags: Lenovo Products

Similar Questions

  • SMEs use solution and lenovo edge battery 430

    I brought a new lenovo edge 430 and in the internet, I hear lots of advice and guides on the use of the Li-ion battery as you shouldn't use it while in charge and blah blah blah.

    I am a regular user of portable every day and I have the following doubts

    1. I am always near a power source, should I remove the battery and connect directly to the ac?

    now when the load is 100% I unplug and use with battery and then recharge it again when it comes to about 30%. It is a good practice and the temperature that I rest is always less than 30 degrees.

    2. I have installed the small business lenovo solution tools, can I put after the operation hours in feature and connect the power supply and leave overnight for free? This will affect the battery life?

    3. can I install all the other tools vantage to think so?  I have 6 GB of ram not so no problem of speed.

    I'm more confused about the battery problem. Please guide me thank you!

    You can install the Lenovo Solutions Center (replaces the ThinkVantage Technologies) here:

    http://support.Lenovo.com/en_US/detail.page?LegacyDocID=LENV-DIAGS#LSC

    Then you can set all the parameters of the battery in the power manager, including ways to increase the longevity of the battery.

    You can charge it all night and set an upper limit and it will stop charging. (You can set it to stop loading at a certain percentage, for example, 80%)

    I hope this helps.

  • Increase the use of the CPU with nvme or searched ssd ssd...

    My 'record' CPU usage is about 50% on a dual xeon (system more old bridge of sand...) 2 x 8 core 32 thread) when using a consumer 850 samsung ssd as a source and the export of other ssd cache on the hard drive or ssd right also. Yes separate OS and Adobe on SSD. And the cache on another hdd put ssd caching.

    I was wondering if anyone has noticed benefits with source really slamming first CC fast disk... e. g several s searched sata in raid 0 ssd or NVME ssd or ssd pci-e.

    Know and not first love high ghz cores, just trying to find the bottleneck. Made 3d etc and so need a lot of hearts here (soon improve to 16-22 core xeon v4).

    Am also aware that codec has a lot to do with it... h. 264 and cineform (doesn't work does not at the moment) is appalling on the first, while DNxHD seems ok. For some time I've tested DnxHR.

    As a reference, FFMPG with MyFFMPG front end has no problem to use 100% of all cores/threads during the encoding. But of course does not help when editing!

    Will do... but using MyFFMPEG here (front-end GUI for FFMPEG) for some old clips of gopro in protune, h.264 mov DNxHD files hd2 (no DNxHR yet! bummer!), but quite impressive to see all 32 threads pegged at 100%! Yes baby, that's what I'm talking about!

    going to try this once again, important macroblocking, DNxHD standard MyFFMPEG parameters not maxi not rated (hard to say I look on screen uhd)... but then again 8 clips took all of about 5 minutes...!

    Edit even tried with different settings, prores standard on ffmepg profile, once again use at 100%, 8 clips made in about 5 minutes of time... of course could not use pc at all, mouse was the analysis! But good to see the hearts of work!

    Maybe Adobe reeally reaally wants us to be multi-tasking rather than take coffee/beer breaks? Will come back to this topic once I visited configuration (22 carrots x 2!... you know for real work)... and I guess that will have to buy some sort of quad-core i7 for adobe... a piddler machine located in the corner and first... hahaha... what a joke...

  • Battery Lenovo Edge 15 unauthorized error

    I have a Lenovo Edge 15 80H10004US. It's about five months. Recently, I noticed that the battery has a red X on it, and although it is reported that plugged in charge, he never takes a charge. If I disconnect the AC power that the laptop turns off in one to two seconds. I read many similar problems with the older models, but not mine. Similar recommendations that seem to include measures such as the removal of dough that is not possible (AFAIK with on the cancellation of the guarantee), turn off the system as a Hard Reset and uninstall the battery ACPI drivers. These steps have not solved my problem. The Energy Manager lists the battery as unauthorized and tells me to get it replaced.

    I would like to get a few patches, other recommendations that send them to the Lenovo or have the Geek Squad to fix (it was purchased from Best Buy).

    Please let me know what other information you might need to assist me.

    Red Cross appears usually when the battery has failed.

    If you have already tried the hard reset and update the drivers, then it seems not be much you can do.

    Repair of Lenovo, while you are still in warranty, it would be my suggestion.

  • After the migration of the catalog security issues

    Hello

    We installed a new environment of Sys (11.1.1.7.0) and now need to migrate the OBI of Dev (11.1.1.7.0) objects. Everything works as expected in Dev with connection and view dashboards appropriate according to the permissions of the users. Now, after the migration to Sys when we try to connect to hostname:9704 / analytic all users cannot see the table edge and catalog of objects. WebLogic even does not see everything. I can see items in catalog offline through the Manager of catalog or Windows Explorer. If I look at the catalog using the Catalog Manager my permissions do not allow me to see all items in folders. However, Dev, I am able to do. It seems that some thing is out of sync btwn the catalogue and policy store even if users have the relevant groups assigned in the weblogic LDAP. Any ideas on what might be happening or how to fix?

    Migration process:
    (1) store the migrated policies and identity sys Dev store. Confirmed objects have been migrated.
    (2) migrated RPD and sys Dev catalog. Confirmed objects have been migrated.
    (3) refreshed GUID in Sys
    (4) services start successfully

    Kind regards
    Mike

    Hi André.

    I worked with Mike on this permissions problem and can provide feedback.

    I compare the "Shared folders" privileges between the two environments, DEV (works) and TEST (does not work).

    The DEV environment has:

    Name - Type of permission - details-
    ------------------------------------------------------------------------------
    -Authentication user - Application role - total control - control total
    -Presentation Server Admins - role of catalog - full control - full control

    The TEST environment has:

    Name - Type of permission - details-
    ------------------------------------------------------------------------------
    -Admin BI role - Application role - full control - full control
    -Role of consumer BI - custom...-read, through, etc. - the Application role

    I'm changing the TEST environment to reflect our operation DEV permissions:

    Name - Type of permission - details-
    ------------------------------------------------------------------------------
    -Authentication user - Application role - total control - control total
    -Presentation Server Admins - Application role - full control - full control

    I am now able to log in as my administrator user and have access to the appropriate objects.

    I have a few questions, I hope you can clear up however.

    (1) something in our process of migration to our TEST about. must have updated the privileges of shared folders not to include roles authenticated the user & Presentation Server Admins/groups. It's weird, because we migrated all our DEV operating environment around. No indication of what we have fact/lack would be useful.

    (2) authorities 'Shared Folders' REP on my DEV TEST Server vs server, the type of role is 'Catalogue', and 'Application' on the other. How we do conversion as a catalogue to an application from DEV to TEST role?

    DEV:

    Name - Type
    ------------------------------------------------------------------------------
    -Presentation Server Admins - role catalog

    TEST:

    Name - Type
    ------------------------------------------------------------------------------
    -Presentation Server Admins - Application role

    Much obliged.

    Ben

  • Memory max Lenovo Edge 530

    Hello fellow Lenovo users.

    I'm sure that this question is already answered a few times. But what is the max memory than the 530 of edge can support. Some places say 16 gig and some (Lenovo including himself) 8gig.

    Hoping I can put 16 gig, because I use virtual machines near all time

    Thanks in advance!

    -New user of Lenovo!

    Welcome to the community.

    I just reinforced with the Lenovo purchase customizer ( http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/builder.workflow: enter? sb =: 00... ) for border E530 and 16 GB is offered as a choice. then you should be good to go.

    HTH.

  • Cleaning of Windows install on Lenovo Edge

    Hello

    I have a Lenovo Edge 330 (E330), with win 7 pro pre-installed. I'm annoyed by all the programs that are installed with the laptop, and I would rather the laptop with a fresh install of Win 7. I have a Win 7 Enterprise, but not a Pro. If I try to install Win 7 Ent., this would cause problems? Drivers for all hardware seems to be available on the support site, which should not cause a problem. Just need to now if there are bumps on the road?

    Best regards

    Frank

    Denmark

    Hi Frank and welcome to the community,

    The first think you should do is to burn a set of recovery disks.

    Once you install Enterprise Edition, download and run ThinkVantage System Update .   This should find and install drivers for the system.

    In addition, on your C: drive, there is a folder named SWTOOLS.  This contains your drivers and applications.  You can copy it to a flash drive and use it to reinstall the drivers.  Most of the pilots in that contain their installers.

    Dave

  • Mail of the Mac Mini, iMac with the migration wizard

    I have a mac mini (2014 - El Capitan) that I have used for some time now and I have many mailboxes (30 +) with many stored messages (100s maybe 1000s).

    I recently picked up a 2011 27 iMac which is running OS X Sierra Final Release Candidate due to vision problems.

    Both units are working well but I would like to transfer my boxes to the letters, messages, and the account settings from the Mac Mini to the iMac using Migration Assistant to take advantage of the larger screen.

    Am I able to select only the data for e-mail (boxes letters, messages and settings) to transfer somewhere in the Migration Wizard interface or will it just to start the transfer of all?

    I use iCloud for note, calendars and contacts, but prefer not to use for e-mail.

    Any help would be greatly appreciated.

    Thank you

    WN

    The simplest option would be to use Time Machine to restore your data.

    Other Options:

    You can export the folders you want to transfer the mini using export of Mail under mailbox function in the Menu bar > export a mailbox... Drag to the folder on the desktop on the new iMac and import in Mail. File > import boxes mailbox...

    You can also use a third-party application, Emailchemy to export your Mail on the mini and pull only the folders you want and import. If you have many files, it would be a faster option.

    http://www.weirdkid.com/products/emailchemy/

    Otherwise, you could drag on the whole Mail > V3 folder let Sierra update data. This assumes that you have already started using Mail to Sierra.

    You don't have to use iCloud email to use Apple Mail. I strongly suggest that you use IMAP to service what ever you choose to use.  Comcast, Yahoo, Gmail, AOL, Hotmail (other)

  • Where is the Migration Wizard?

    I have three MacBook Pro. My most old, 5-6 years, repeated that she was seriously infected by a virus. I erased it. Now, I restart and OS X Utilities push the info, with four options: restore of backup Time Machine, reinstall OS X, Get help online or disk utility. I time Machine using my current Mac brand new, but I can't restore the old Mac directly by using the new Time Machine copies. It tells me to use the Migration Wizard. Where is he? I have yet a third Mac, a few years more recent than this one, that I can restore from reformatted. Is Time Machine restore possible? How can I find Migration Wizard with these four options on the screen? Thank you.

    Tom in Texas

    Try this:

    Move your content to a new Mac - Apple Support

  • During the migration of projects opening in PICTURES project names will appear on the News Photos 'albums '?

    Prepare my Aperture library (with deep levels of files/projects/albums) to migrate to pictures.  I want to know if the NAMES of my files/projects/albums will be kept in Photos and will appear in the new view of photo albums.

    Using Aperture 3.6 and pictures is up to date. 10.11.6 OSX

    Yes, they migrate. To more easily confirm everything is fine select see the sidebar on the view menu. Also, your current Aperture library will remain unchanged during the migration, if youre not really take risks by trying.

  • Can I get the contacts and email from an old record without using the Migration Wizard?

    Can I recover Contacts and messaging of an old record without using the Migration Wizard? Disc of the user in question has been very corrupted with several programs having a weird behavior. Migration wizard migrated corrupt files, so, even a clean install with only migrated users gave rise to an unusable installation.

    I have now all own installed now, but need old email files and contacts. How can I transfer this information a copy of the old/bad drive and only this info?

    Yes. With the old drive mounted and available, open Mail and choose import mailboxes... from the file menu of mail. In the dialog box import data from , choose Apple Mail.

    Navigate to the Mail folder to the user of the old library drive. According to the version of courier used, you might see folders named V2 and / or V3. Choose the applicable folder, and then click Choose.

  • iPhoto to the Migration of the Photo

    I recently spent hours doing several photo books in iPhoto 6.0.6 v. (322).  When I tried to buy the books and received their approval, I received the following message: "the possibility of ordering books, cards, calendars and prints is no longer supported in this version.  Upgrade for OS X to order Photos. »

    Is it possible to export and save the photo books before you migrate to pictures?  I'm afraid I'll lose the books pictures during the migration process.

    Thank you!

    The books are simply database entries in iPhoto - you can't save them separate from the entire library 9and that you should never go without a good current backup

    Unless something goes wrong, you will not lose the books or else by the upgrade to Photos – however photo books are often much different than iPhoto books and you may not be satisfied with what is available after the upgrade - backup and upgrade, and if you don't like not the results that you can order atPrestoPhoto iPhoto books

    This article explains how things migrate iPhoto to Photos - How Photos handles content and metadata from iPhoto and Aperture - Apple Support

    LN

  • With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

    With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

    Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

    If that's you then pictures will miss a lot for you.

    If this isn't the case, then opening was probably overkill for your needs.

    If you like the pictures then this is the way to go.

  • The Migration Wizard transfers the data of other users?

    My wife and I share a Mac as different "users." If I use the Migration Assistant to transfer data to my new Macbook Pro, it also transfers all of its side (documents, music, etc.)?

    I heard that Migration Wizard allows you to do this. I found it very complicated to set up and easy to make a mistake. Because I'm on several Macs that regularly require copies exact bootable I paid for and have used Carbon Copy Cloner from Mike Bombich https://bombich.com/

    Although the CCC4 ~ $40,-(il est compatible avec El Capitan) you can download a free 30 day trial. It is so easy to install and make a clone. I never had a hick-up using many times. There is a developer good reputation well known, you can contact at any time.

  • iMac fan runs full speed after the migration wizard

    Hi, just a clean installed 10.9.5 BONES and then I used the migration assistant to transfer my backup time machine from my old computer. He made the transfer, took nearly 4 hours. Then when he was done he rebooted the computer, and as soon as he started the fans in the computer run at full speed. I have a small (HARD drive fan control) software that I have installed to see the temperature and it tells me 119F and fans are 4962 RPM. Why it does this?

    Once the computer restarts, it said it was computer optimization and it can affect performance, can that cause the problem of fan? I did e-mail importing and installing imessage and now I'm looking at the speed of the fan and it is now 118f 4638 RPM... always very noisy. This computer did not a fan NOISE until I migrated my data.  Help, please!

    IMac is a 3.06 GHz Intel Core 2 Duo

    4 GB OF RAM

    27 ", end of 2009

    1 TB harddrive

    Once the computer restarts, it said it was computer optimization and it can affect performance, can that cause the problem of fan?

    Yes. It should settle down after the Spotlight indexing. Which can take some time, depending on the number of files that needed to index.

    119 ° F is on the colder side of normal and no reason for concern.

Maybe you are looking for

  • predictive text on my mac

    Hi, please know how to turn off predictive text on my mac

  • Driver HP6002A

  • How can I stop auto-updates and keep UserAccounts asking if I was the same update

    User accounts in W7 has no option to not be reminded about the same updates again [I won't need not and cannot use] every thirty minutes or more for a few days. If I click on Yes, I get a message saying that I don't need but 30 minutes later AU wonde

  • Printing fails after two pages.

    Original title: print Fail When I try to print I can't finish printing, lost more paper, printer tries to print again after failure same pages before a printed several times, I got an error via on report sheet printed for printing time. PCL XL error

  • Studio XPS 9100 watch A04 BIOS date 10/21/2010

    I flashed the BIOS A04 a few months ago and never paid much attetion to it. The flash said it was successful. But when I looked at the system properties, it gives the date of the BIOS as 21/10/2010; the BIOS was released 31/10/2011. Is this correct?