Lenovo G500 boots only when battery is removed

I bought a Lenovo G500 in April 2014. A few weeks ago, I noticed that it was getting hot and shut down (screening just empty and put off the power). I removed the cover and cleaned the fan and made sure that the laptop is kept in a well-ventilated.

I can only start the laptop if I remove the battery first, but after it is cooled for a few hours. Once it is started, I put the battery again. He will work a few hours and then stop again. I have an i4 with Win 8.

Anyone perhaps tell me what can I do to help? It is not under warranty more, so I'm here, GROUND.

Hi Bsmith0830,

Welcome to the Forums

According to the request, we understand that you are facing the issue with the system.

Try to uninstall the ACPI and controls for the issue, to uninstall go to Device Manager select the dropdown under option batteries. Right-click on the compatible control method battery Microsoft ACPI and select uninstall and reboot the machine and check for the issue.

Best regards

Ashwin.S

Tags: Lenovo Notebooks

Similar Questions

  • Portege M400 boots only when the base

    For the last two months, I have starting problems with my M400. When it is not attached to the docking station it starts as soon as a person out of 30 (or more) times. The rest of the time that it is either the power led flashing orange or simply the Green switch, and do nothing else.

    I tried to start with a/c, A / C + battery, battery alone, but nothing helps. However, when it is attached to the docking station, it starts fine everytime.

    Any thoughts on what could go wrong?

    + The message was edited: link has been removed - unauthorized +.

    Hello

    From my experience the docking station has no influence on the start-up procedure specification.
    That's why I put t understand why the laptop does not start successfully without the stand logged.

    But perhaps it is something wrong with a connection to the motherboard and because of s connected docking station the motherboard would be forced to another post.

    Sorry, mate, but we can only speculate what might affect the start-up procedure specifications

  • Satellite M50 - charges the battery only when stopped

    My Satellite M50 battery only when stopped. Does this mean that when I work I'm still running on batteries, which of course carry out completely after 1 to 2 hours. Then I shut down the computer and it started charging again (orange led), and after a few hours, I still have a 100% charged battery.

    Of course, this means that the computer is not available. Until a few weeks ago it used to have the same problem if I disconnected the power plug then reconnected it: the battery needed to dump then to 0%, even if the power is connected, but now the problem is constant.

    I've updated to the latest version of the BIOS, I could find and even completely reinstall windows from the recovery disks, but the problem is still there. The computer is a Toshiba Satellite M50 - 126 model PSM51E, the BIOS is Phoenix BIOS v2.10

    Is it possible that the BIOS is damaged of some sort? I tried to reinstall V2.10 but he told me that I have the same version and it will not be installed.

    Hi lartech,.

    You can recharge the battery if you get into the BIOS and made the battery charging icon light?
    Are you using the original Toshiba AC/DC adapter and battery?

    In the worst case, it s a malfunction of the motherboard, and you have done what you can do: BIOS update and to install Windows from the recovery disc. If this doesn't help s a bad hardware work.

  • Lenovo laptop drive opens only when I start my computer?

    I recently bought a Lenovo IdeaPad Z500 and when I start the machine, either from scratch or awakening of the mode standby by pressing the power on button, the cd player pings open. It's really annoying! Anyone know why? Or how I can get it to stop?

    It's the machine:
    Lenovo IdeaPad Z500 i3 - 3120M 6 GB 1 TB DVDRW 15.6 Win8 "- white (59372917) - dabs.com"

    Also, I've only had the machine yesterday - and it happened from the moment when I first turned on. I have no restore points and you don't want to mess around with something like an uninstall. I just want to know how I can activate this parameter (if it is a parameter) OUT, nothing has been installed yet or anything like that. It is so brand new.

    Hello. Called Lenovo. Guy was really helpful. Told me how to restore to original. Did not work. Thus recalled. Spoke to him again, and he said that he has never heard speak of him before either, and we sort of get a new one to replace it. It happens that two days ago. So I'm hoping dabs.com will deal with it quickly.

  • Freezing up ONLY when it is PLUGGED in, DO NOT when executing a battery

    I'm having a problem with my computer toshiba laptop.  When I plug it and use it, it freezes. After many experiments, I discovered that when I leave it unplugged and run it just on the battery, it does not freeze upwards.  Help.  This is crazy.  What would cause such a thing.  I tried other points of sale, I tried to use the power strips.  It freezes only when it is plugged.

    Hi zianez,

    1. did you of recent changes on the computer?

    2. you receive an error message?

    3. do you have other external devices connected to the computer?

    Method 1

    I suggest that you reset the parameters of power plan on the laptop to default settings, then check if it works.

    (a) open the power supply Options by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Power Options.

    (b) according to the plan that you want to change, click change plan settings.

    (c) now, click change advanced power settings

    (d) click on restore defaults for this plan.

    (e) click applyand OK

     

    Check if the problem persists.

    Method 2

    If the previous step fails then I suggest that you check in the event viewer to find out the cause of the issue and after return with details.

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Can I use my Lenovo 3000 N500 without a battery using only the AC adapter?

    Hi just ask if I can use my Lenovo 3000 N500 without the battery using only the AC adapter on? Because I use it almost 24 hours. Thank you...

    Hello leo_joel,

    Yes, you can use it without battery.

    But I would recommend that it is glued to, cause the powermanager will load automatically for the health of the battery.

    Also it s quiet possible, that your won´t system running at full capacity, if the battery is glued on.

  • Computer laptop Lenovo G500 does not connect to wifi when I travel.

    I've had this problem since day one. A support person of Lenovo managed to connect when I first became aware of the issue, but it would not log the next time I was in a hotel. The support people with the service provider for the hotel wifi could not help me. Drivers have been checked, windows has been updated. Microsoft security essentials antivirus running. At home, I connect to internet through my ethernet cable.  I travel quite often and my laptop is useless, unless a wired connection is available. Help!

    Hi Mario,.

    I imagine the inconvenience that you are experiencing. I appreciate your efforts to resolve the issue. I will certainly help you in this matter.

    This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period. This problem can also occur if Wi - Fi drivers are not updated properly, or due to changes in the network settings.

    Try these methods below and check.

    Method 1: run it Troubleshooting Internet connection problems.

    Try to run the Internet Connection Troubleshooter that can help you solve the problems with the internet connection.

    1. Press the "Windows + C" to activate the menu of charms or move the mouse to the bottom right of the screen and you will get the menu of charms.
    2. Click Search , and then select settings.
    3. Troubleshooting of type and select Troubleshooting.
    4. Click network and Internet , and then select Internet connections.
    5. Click Next to run the troubleshooter.

    If the problem persists, follow method 2.

    Method 2: Disable IEEE 802 authentication. 1 X.

    To disable authentication IEEE 802. 1 X, follow these steps:

    1. Click Start, type ncpa.cpl, and then press ENTER.

    2. Right click on your wireless network connection and then click Properties.

    3. Click the wireless networks tab.

    4. Under preferred networks, click your wireless network, and then click Properties.

    5. Click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

    If the problem persists, use method 3.

    Method 3:

    Follow the steps in the Microsoft help articles below:

    Why can't I connect to the Internet?

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

    Thank you

  • gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

    gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

    When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

    It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

    Appreciate any help on this

    Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

  • Lenovo G500 with SSD and HDD in ODD Bay

    Hello!

    So I have a laptop Lenovo G500 aged for 1 year with a processor i5 to 3230M, now an 8 GB (originally, it was 4 GB) of RAM and a 1 TB HARD drive. I recently bought a 250 GB Samsung SSD 840 Evo and a disk HARD caddy from here: http://hddcaddy.com/en/lenovo-ibm-hdd-caddy/646-lenovo-g500-hdd-caddy.html

    So I removed the HARD drive, put the SSD in its place, removed the STRANGE and put the HARD drive in its place. It was all nice and comforting, but that in some points the HARD drive was not seen by the system as if it was disconnected or something. This happens usually when the laptop was running, if I rebooted everything worked. I remember that in the past, I don't know, maybe in the last 4 months, I used my ODD twice and neither time was it works well.

    So my question is: can it be that my ODD SATA port is faulty, or does this problem occur because this whole switch-and-swap operation is not supported by my laptop? If this is the first I can replace this SATA port?

    Hello!

    Thanks for the reply. I just did an update of the bios, so far everything seems to work well, it still took some time (a few hours) unitill the problem occurred.

    If the problem persists I'll try the fix from microsoft that you sent, but with the 2nd solution, there is the problem that I need to reboot the system to get the bios, but so far after a reboot my laptop has always recognized the HARD drive.

  • Lenovo G500 blocked "Lenovo splash screen.

    Hello

    I have Lenovo g500 core i7 ram6 ati radeon 8750 1 tb hard drive. It was like a month, this laptop hangs at the splash screen. I live in Iran and that the laptop is made in China.

    I searched the forums and found the solution 'removing the battery, adopteur 15 sec holders and pluging AC button' and it worked...
    But today it no longer works... I'm stuck on the home screen for 4 hours and it's our desktop pc that I use to post this message.

    I really need my laptop! This is my life!
    Help, please...


  • M10 lock only on battery

    My race of Satellite Pro M10 Pro XP hangs but only when on battery. No problem when it is plugged in. Keyboard and mouse Th freezes but continues to Flash the mouse icon. Occasionally, I get a blue screen of death indicating a material error, something along the lines of ofIODCH/NMI CHECK. Toshiba now suggested a change of Board of Directors system, but I'm not entirely convinced.
    I tried:

    1. clean the machine rebuild,

    2 update the BIOS

    Anyone had similar problems? I saw a topic on this site where a guy with a differetn model has had the same problem. Someone suggested a BIOS upgrade, and then the topic has been closed until the guy has a chance to say it worked or not. Please help me and please do not close the tiopic down until we have a resolution.

    Thank you very much

    Chris

    Hello Chris

    It seems that it s a really hardware malfunction. In this case, there are not many options.
    I recommend you contact the service partner. They can give you a solution exactly.

    Good luck

    Good bye

  • Satellite L50 boots only after a forced shutdown

    Hi, I have a few problems with the start of my laptop (L50 - D, Windows 8.1) since yesterday.
    When I boot it by pressing the power button, the screen stays black, but the laptop is the normal startup sound. When I press the button once again, the laptop can be disabled, while the screen keeps black all the time. Only when I press forced if off, the laptop starts normally (Toshiba sign appears, Windows etc.).
    I already changed the economy options to avoid the "sleep mode", because I had a few problems he wakes up energy.

    Thanks for your advice!

    Jan

    Hello

    I think that the laptop does not power off properly... probably the system keeps the laptop but defines the hybrid unit stop mode. This is the default setting for win 8 / 8.1

    I recommend to disable this mode and perform a full stop

    More about CIHI:
    http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  • Problems with Lenovo g500

    Hello

    I've been using Lenovo g500 for about a year now, but last week there was a problem with my laptop and I had to restore windows by using the button restore Lenovo. The windows restore very well and I was able to update Windows 8.1 Although wiped all my data in the C drive.

    But now my laptop does not connect to any bluetooth device. Whenever I go into the settings of laptop, it just says: "looking for bluetooth divide but it never detects my phone or any other bluetooth devide.»

    In addition, since deleted my data, I have to reinstall the drivers for my printer but this laptop does not even recognize the CD! He does not have ANY CD.

    And the Lenovo Veriface doesn't work either now

    I've searched and searched to these questions. I reinstalled the drivers lenovo veriface and bluetooth but they don't always work. And drivers bluetooth never has been removed from my laptop because they were installed in the D drive, but they do not.

    Someone help me please I really need to print some documents, but this laptop will not install my printer drivers.

    Recommend to download Bluetooth Driver (Liteon/Atheros, CyberTan/Broadcom, Realtek) version support 8.0.1.305/12.0.0.7850/3.769.769.091813 and installation costs if possible.

    I recommend installing the chipset and driver. This should update the windows of files needed to remove the yellow warning.

  • TECRA S2 when battery charging, Wireless drops every 5 min

    Hi, I have a very annoying problem.

    When I'm surfing wireless at home I have no problem, but when I start to charge my battery, wireless turning off every 2 minutes or so to reconnect immediately.

    This problem does not exist when I am in charge battery next to the wireless router. Only when I'm in the living room.

    Is that what someone else has this problem or is - someone has a solution for this?

    Post edited by: jeetn

    The wireless network card supports different options. In the Wlan card properties, you should find a tab advanced.
    There you can change different settings. Please try to disable the power save option WLan Card.

    I don't know if it helps but you know train is free ;) m

  • Y410P Nvidia GPU works only when plugged in?

    Hi all

    I know that this is a frequently asked question, and I also knew that the Nvidia GPU raised only when an application heavy 3D graphics is charged.

    This is the case. But I don't get a bad 3D rating (1 star or higher) during the game.

    I have configured the program updated Nvidia 3D well on a level of high performance battery. The notification bar of Nvidia is also show that the game is loaded using the Nvidia GPU.

    On the other hand, when the laptop is plugged in, I get a better mark 3D on the same game. How is that possible?

    It is not comfortable, due to the fact that I need to plug the laptop when I want to play the game to get the best performance.

    All solutions? Thanks in advance.

    Regardless of the number of parameters of high performance you activate, you will never get the same set of battery power that you can get plugged.

    The battery can not simply support the GPU for the amount of power he needs to play games. At best, you can play a mediocre performance.

Maybe you are looking for

  • W500 display stretched after the downgrade to xp

    After that my thinkpad w500 shot several times, I downgraded it to xp. Since then, my screen is stretched horizontally and said for video controller driver is missing. I downloaded here but always the same number of pilots. It's like I just can't fin

  • MS Office teacher & 2002 edition will run on windows 7 Home Premium?

    My existing operating system is MS Windows XP Home Edition Version 2002 Service Pack 3. It also has MS Office teacher & edition 2002, everything that I want to keep (I have yet 2 licenses for the software).My question is I am about to buy a new Dell

  • problem importing from dvd in windows movie maker

    made a dvd with windows movie maker home but now I want to change it, it is possible to re - import into windows movie maker on the dvd that I did?

  • Cannot paste from Internet Explorer works.

    Trying to copy text from Internet Explorer and paste it into a Microsoft Works document, I get the message that the content is too large to paste and to select less text.  I tried, but it still doesn't work.  Even if I'm just trying to copy a Word an

  • The image on the screen too large.

    For reasons unknown to me, the trcture that is displayed on the screen of my Toshiba laptop now exceeds the size of the picture by a considerable amount and I am constantly move the image left and right up and down using the arrow keys. Can I have un