Lenovo IdeaPad 100-15IBD keyboard and the touchpad does not

I bought a Lenovo IdeaPad 100-15IBD a few days ago, and after a series of problems that I managed to fix, I woke up this morning to find that my keyboard and the touchpad do not work. Last night (about 9 hours ago) it was working fine. Anyone has an idea how can I fix?

Problem solved. It was because of the abdriver for keyboard and mouse I have installed from the official website of lenovo, I don't know how or why, but when I uninstalled it, it started working again.

Tags: Lenovo Notebooks

Similar Questions

  • Satellite C850D-11 q - keyboard and the Touchpad does not

    The laptop is a little more than a year and worked ok until recently.

    Symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.

    He progressed to the keyboard and the touchpad works do not randomly points while the use of the laptop.

    Finally cleared the HARD drive and restored windows 8 alone, the laptop still BSOD quite frequently - refuses to install the updates required for 8.1 and the keyboard and mouse often do not work even in BIOS Setup page. I reinstalled the RAM and HARD drive.

    Short of ideas, the keyboard and the touchpad work and so I guess that their connections are correct - but often they just stop.

    Any ideas appreciated?

    Thank you

    Hello

    > Finally cleared the HARD drive and restored windows 8 only
    I hope that you created before Toshiba recovery disks you have formatted the system.
    Did you?

    The recovery disks will allow you to reset the laptop to factory settings; on the same State as at the first day of the purchase.

    > First symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.
    Well, usually the keyboard problems are not problems system or software as the keyboard driver is part of the system and an additional installation of some drivers is not really essential and necessary.
    That is why in most of the cases the keyboard problems could be the causes of physical problems.

    However, after using the recovery disc and the parameters of the laptop back to factory State, both parties (keyboard and touchpad) should work perfectly.

    > the BSOD laptop still quite frequently - refuses to install the updates required for 8.1
    BSOD doesn't look very good. As mentioned above; parameters of the laptop back to factory settings should solve all the problems in the system. In the case where the BSOD appears even if the power has been turned back to factory State, a hardware problem could be the reason for this.

    I had also some problems with the update 8.1 Win. The system to win 8 could not find the Win 8.1.
    But the reason for this was simply. I had to install all updates to Win 8 and had to update the State system before trying to update to the next level following 8.1 Win

    So, what can I say: I will try to put the laptop initial configuration using the recovery disk.
    Then I would try to get automatic updates (a few reboots were essential too). After that, I would check the functionality of the keyboard and the touchpad. In the case where them parts would not work, I would contact the service to check if the two pieces.

  • G570 keyboard and the touchpad does not work

    The new computer about 6-7 months ago. Was running Windows 7 that has settled on the laptop. I had some malware on my computer, tried many malware removal tools such as malwarebytes, adware cleaner, finally had to use system restore. Then I ran Security Check. Now, I can't start in safe mode or in normal mode. When I turn on the computer, he'll go as far as the login screen and then does not allow me to move the cursor or type my password. It behaves as if the keyboard and touchpad are locked. I have to remove battery to shut down the computer. Same problem reappears when I turn it on again.

    Hi reeder2,

    What you read is correct. After hitting the key recovery key, fall into place the machine and directly to the recovery menu.

    Do try and let me know.

    Concerning

  • Keyboard and the mouse does not work after the release of sleep

    Original title: error keyboard and mouse

    After you have installed Windows 8 I had problems with the keyboard and the mouse.

    If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,
    I can not connect and I have to restart my computer to the power button.
    How can I avoid this problem? It happens every day at least once.

    Hello

    1. you are using a wired keyboard or mouse and wireless?
    2. What is the brand and model of the PC?
    3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

    I suggest you follow these methods and check if it helps.

    Method 1:
    If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

    (a) press the Windows logo and X from the keyboard.
    (b) type devmgmt.msc , and then press ENTER.
    (c) expand Bus USB controllers.
    (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
    (e) restart the computer and reinstall the USB controllers.
    (f), check the question;


    Method 2:

    The 'USB selective suspend settings' option in the Power Options can be activated.

    (a) press X and WWindows logo and choose Power Options
    (b) click on change plan settings for the selected power plan
    (c) click on that to change advanced power settings
    (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
    (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

    Method 3:
    If this does not help, I suggest to change the power to its default settings and check if it helps.

    You can follow the steps to do this:

    (a) press the Windows logo key and X set and choose power options.

    (b) under the preferred plans, click on balanced (Recommended).
    (c), click Change Plan settings and more balanced (Recommended) option.
    (d) click on restore default settings for this plan on .
    (e) click Yes to save the changes.

    Now check the issue.

    Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

  • Recovery of the Internet and the Touchpad does not

    Hi all!

    I tried to format my Macbook Pro (2015 start, 13 "), so I wiped the disk with disk utility.

    Now, I'm the restart with CMD - R and a globe appears. I know that it means that the computer is trying to reboot from the internet, but I have to choose my Wi - Fi and insert the password.

    The problem is: the touchpad is not sensitive, so I can not perform the procedure. I also tried a keyboard and a USB mouse, but it does not work either.

    Thanks to anyone who responds!

    Start up your Mac in Mode without failure.

    Upper left corner of your screen, click on the Apple  > Shut Down.

    After your Mac stops, wait 10 seconds, then press the power button.

    As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

    Release the SHIFT key when you see the gray Apple logo and progress indicator.

    Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot



    Then start while pressing the command + R keys to access internet recovery to restore the OS X.

    Just to let you know, you don't need to wipe the drive using disk utility in your Applications / Utilities first folder. Only use OS X Recovery

    to reformat and restore the OS X.

    On Safe Mode

  • Lenovo U31-70 double tap on the touchpad does not work

    Hello

    I just bought a new Lenovo U31-70 with Windows 10 already installed on it. There is a problem with the double tap feature, it does not work. The feature is enabled in the option.

    This model of Lenovo has Alps touchpad driver and I am not able to find the place where activate the double tap on regedit, of workaround works instead if you have Synaptics drivers.

    Who can help me?

    Sorry... I found a solution in a similar topic, admin can close it.

  • When install Vista Home Premium computer hangs on the language selection screen. No visible cursor, the keyboard and the mouse does not.

    Hi, when I try to install vista that Home Premium 32 bits on the computer of my son, through the installation of loading files with the gray bar at the bottom, then goes to the screen language selection, at this stage, I can not select anything using the keyboard or the mouse. There is no cursor visible. Keyboard and mouse both work fine in the bios and on other machines. Have used other keyboards and mice on the machine in question, but that makes no difference. Tried another copy of vista, no difference. Tested on Windows 7 install and everything works fine!

    Very confused, thinking that it must be a driver problem, but how about him? Any help is appreciated!

    Hi Rickydg,

    Thanks for posting. Please contact ASUS and see if there is a BIOS update available for your system. Update the BIOS and then try to install again.

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Bluetooth activate the keyboard and the mouse does not

    My compatible bluetooth keyboard and mouse do not work.  I tried to re - install using the disc Bluetooth wireless keyboard and mouse.  However, once you have started the program, I get the following error message... "" Sorry this version of the software is not compatible with your operating system. ""

    I have re-installed the software even before, but this is the first time this type of message has developed.

    Any idea would be appreciated on how to fix.

    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    How to setup a Bluetooth connection.

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    Set up a Bluetooth compatible device

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    The problems with Bluetooth devices

    See you soon.

    Mick Murphy - Microsoft partner

  • Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

    Hello

    I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

    I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

    When I put the laptop to sleep, everything works fine when I wake up.

    but, if I'm away from the office and I have to restart my laptop, here is the problem.

    The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

    At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

    When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

    later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

    I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

    I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

    It's really annoying and I hope someone has a solution.

    Thank you very much

    best,

    Alex

    I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

    I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

  • loss of function of the keyboard and the touchpad

    I am a rural small repair shop and received a HP/Compaq Presario CQ60-615DX to repair the loss of function of the keyboard and the touchpad. My first thought was that the Ribbon connectors came loose. However, when I first turned it on, the keyboard worked to enter the Windows password. Once started, the keyboard would not work. My client had a major sale/repair company and their solution was to install a keyboard on the screen and use a wireless mouse. I started my research in this tthinking of problem that perhaps it was caused by malicious software. Fortunately my client gave me the AC adapter while I was looking for input on the laptop voltage. It wasn't on the outer label, so I removed the battery. I reinstalled the battery and was amazed to find that both keynoard and touchpad work now.

    What could have caused this loss of function and why would be to remove and reinstall the battery solve this problem?

    It's probably that the battery actually acted as a hard reset.  A hard reset has the effect to remove remaining current EEPROM and other devices on the motherboard.

    Best regards

    ERICO

  • My keyboard and the touchpad are locked, does not respond to what it is.

    My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

    Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

  • Problems with the keyboard and the touchpad after installation of Windows updates.

    Original title: last updated

    the last update has disabled my keyboard and the touchpad on my laptop.  What happened.

    Hi Janthea,

    Other Toshiba users encounter the same problem and ShadowedMare posted a possible solution in the following topic:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/keyboard-and-mouse-get-device-manager-code-10/326f7c0d-14cb-45C2-A705-32d3a2ab07d6

    Post back if you need help with the registry.

  • Can the keyboard and the touchpad works at the same time?

    I play games on my computer, so I have to use the keyboard and the touchpad. Whenever I have every time I press the keys on the keyboard, the touchpad freezes. But when I plug in a mouse, it works fine. Anyway around this?

    If this switch Windows provides within the parameters of laptop does not help, try the setting as the manufacturer of your control in the old Desktop Panel.

    1. Press Windows + R to display the run box, type main.cpl , and press ENTER.
    2. Locate the touchpad settings, or if none are found, try the Hardware tab, and then click the settings button.  I can't be specific here because every computer manufacturer lets you customize where (or if) they put the settings here.
    3. If you find the touchpad settings, look for options such as 'Palm Check' or 'Rejection Touch' that could be causing your problem.
  • Touchpad on my HP Mini 110-1125NR is locked and the cursor does not move

    I've never locked my computer.  Everything has been implemented in the store where it was purchased about 4 years ago.  I put my computer in sleep mode yesterday afternoon and just tried to use this evening... somehow, the touchpad is inadmissible and the cursor does not move.  He remains in the middle condition of the screen.  I turned off the computer and restarted, nothing done.  Can anyone provide a solution?

    Hello

    Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    If the pointer is still frozen, try double clicking the top left of the button.

    Kind regards

    DP - K

  • Satellite X 200-219 - the touchpad does not work as it should

    Hi all

    I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

    So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

    I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

    Any help you can give will be greatly appreciated.

    Thanks in advance,

    Lee

    I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
    Found some related parts the touchpad:
    Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
    Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

    But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

Maybe you are looking for

  • What is the vintage status?

    Yesterday I had a conversation with a Genius bar technician, and she told me that my computer can be seized 'status vintage' soon and I can want to consider replacing the hard drive.  I have a Mac (21.5 inch, mid-2010)... You can define what "State v

  • Installation of Windows XP - SP2 on Qosmio F30-140

    I have the original profession of Microsoft Windows XP - SP2. During the installation of the XP - Pro, it is not the hard drive. The XP can load the driver only from disk (disk) that we don't have. Please notify.

  • Printercontrol App impossible to find HP 6500 e709n printer on iPhone and iPad

    I have a HP 6500 e709n connected to a wireless router.  I installed the HP eprint app on my iPhone and iPad, and both work as expected.  I then installed the Printercontrol app on the iPad and the iPhone, but can't find the printer.  I get a continuo

  • 'Error 0x800706b9' print spooler error boot HP Pavilion desktop pc 500-054

    I have a HP 500-054 desktop PC Windows 8.1 My print spooler not working and I've done everything I know to do... when I went to try to restart the print spooler I got this message: Error: 0x800706b9 lack of resources is available How can I fix? Help,

  • Snapshots created with the EqualLogic VSS provider are not displayed in SAN HQ

    Hello Poster for the first time. We have just implemented an EqualLogic SAN, PS6100X network, and we're having performance issues between our DPM backup server, one of our hosts Hyper-V and VM images stored on the San. I will try to provide as much i