Lenovo IdeaPad K1 and recommended to send files of data from the pc to the internal storage K1.

Similar Questions

• Photoshop is slow and not of reading files NEF raw from the camera to the camera

  Hello, I need help, anyone know what to do about a slow slow CS5 photoshop not following orders and unable to read NEF files (camera raw) I don't have serial number, its been a while since I bought it.  and without that it cannot help me.

  You need to use the D610 Nikon raw files in Photoshop, Camera Raw version 8.3, which is not supported by Photoshop CS5.

  Click on the link below to check the device support and compatibility of camera raw version.

  Devices supported by Camera Raw

  Applications of camera Raw compatible Adobe

  I suggest you to update your product.

  You can also consider converting raw files to DNG, using the DNG Converter.

  To download the DNG Converter, please click the link below:

  For Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  For Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

  I hope this helps.

  ~ UL

• How can I get data (txt file with data from the 5 sensors) in a graph?

  I have a txt file that reads

  time, data1, data2, data3, data4, recentes5, yes/no

  example:

  0,450,427,421,480,622,0
  4,561,513,478,466,540,0
  8,547,531,510,492,515,0
  12,528,524,513,495,525,1
  36,531,524,515,505,534,1
  65,537,528,519,511,539,1
  

  Where the last song realates to a buzzer

  I need a chart that shows all 5 data point (so a graph with 5 lines)

  How can I do this?

  Also, is there a way to show the Yes/No part in LanView?

  Here it is:

  

  It's very simple.

  1. open the text file in a spreadsheet file.  You can connect a control of path or if left blank, it will prompt for a path.

  2. set the comma as separator.

  3. display the values on the graph.

  I just added a digital table indicator so that you can see the values as exactly those of the file.

  

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• I downloaded Microsoft Money Plus sunset and want to transfer the data from the files Microsoft Money 2005. Is this possible?

  I am using Windows 7 and have accounts with MSN Money 2005 and I try to have more data from the Money 2005 file updated in a format that is compatible with the money, and I can use the money more

  See the information displayed by SpiritX MS MVP in the http://answers.microsoft.com/en-us/feedback/forum/user/microsoft-money-question/13ef1581-2dfd-45fc-85ba-92cbcade313a thread

• export data from the table in xml files

  Hello
  
  This thread to get your opinion on how export data tables in a file xml containing the data and another (xsd) that contains a structure of the table.
  For example, I have a datamart with 3 dimensions and a fact table. The idea is to have an xml file with data from the fact table, a file xsd with the structure of the fact table, an xml file that contains the data of the 3 dimensions and an xsd file that contains the definition of all the 3 dimensions. So a xml file fact table, a single file xml combining all of the dimension, the fact table in the file a xsd and an xsd file combining all of the dimension.
  
  I never have an idea on how to do it, but I would like to have for your advise on how you would.
  
  Thank you in advance.

  You are more or less in the same situation as me, I guess, about the "ORA-01426 digital infinity. I tried to export through UTL_FILE, content of the relational table with 998 columns. You get very quickly in this case in these ORA-errors, even if you work with solutions CLOB, while trying to concatinate the column into a CSV string data. Oracle has the nasty habbit in some of its packages / code to "assume" intelligent solutions and converts data types implicitly temporarily while trying to concatinate these data in the column to 1 string.

  The second part in the Kingdom of PL/SQL, it is he's trying to put everything in a buffer, which has a maximum of 65 k or 32 k, so break things up. In the end I just solved it via see all as a BLOB and writing to file as such. I'm guessing that the ORA-error is related to these problems of conversion/datatype buffer / implicit in the official packages of Oracle DBMS.

  Fun here is that this table 998 column came from XML source (aka "how SOA can make things very complicated and non-performing"). I have now 2 different solutions 'write data to CSV' in my packages, I use this situation to 998 column (but no idea if ever I get this performance, for example, using table collections in this scenario will explode the PGA in this case). The only solution that would work in my case is a better physical design of the environment, but currently I wonder not, engaged, as an architect so do not have a position to impose it.

  -- ---------------------------------------------------------------------------
  -- PROCEDURE CREATE_LARGE_CSV
  -- ---------------------------------------------------------------------------
  PROCEDURE create_large_csv(
      p_sql         IN VARCHAR2 ,
      p_dir         IN VARCHAR2 ,
      p_header_file IN VARCHAR2 ,
      p_gen_header  IN BOOLEAN := FALSE,
      p_prefix      IN VARCHAR2 := NULL,
      p_delimiter   IN VARCHAR2 DEFAULT '|',
      p_dateformat  IN VARCHAR2 DEFAULT 'YYYYMMDD',
      p_data_file   IN VARCHAR2 := NULL,
      p_utl_wra     IN VARCHAR2 := 'wb')
  IS
    v_finaltxt CLOB;
    v_v_val VARCHAR2(4000);
    v_n_val NUMBER;
    v_d_val DATE;
    v_ret   NUMBER;
    c       NUMBER;
    d       NUMBER;
    col_cnt INTEGER;
    f       BOOLEAN;
    rec_tab DBMS_SQL.DESC_TAB;
    col_num NUMBER;
    v_filehandle UTL_FILE.FILE_TYPE;
    v_samefile BOOLEAN      := (NVL(p_data_file,p_header_file) = p_header_file);
    v_CRLF raw(2)           := HEXTORAW('0D0A');
    v_chunksize pls_integer := 8191 - UTL_RAW.LENGTH( v_CRLF );
  BEGIN
    c := DBMS_SQL.OPEN_CURSOR;
    DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
    DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
    --
    FOR j IN 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
      WHEN 1 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      WHEN 2 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
      ELSE
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      END CASE;
    END LOOP;
    -- --------------------------------------
    -- This part outputs the HEADER if needed
    -- --------------------------------------
    v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_header_file,p_utl_wra,32767);
    --
    IF p_gen_header = TRUE THEN
      FOR j        IN 1..col_cnt
      LOOP
        v_finaltxt := ltrim(v_finaltxt||p_delimiter||lower(rec_tab(j).col_name),p_delimiter);
      END LOOP;
      --
      -- Adding prefix if needed
      IF p_prefix IS NULL THEN
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      ELSE
        v_finaltxt := 'p_prefix'||p_delimiter||v_finaltxt;
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      END IF;
      --
      -- Creating creating seperate header file if requested
      IF NOT v_samefile THEN
        UTL_FILE.FCLOSE(v_filehandle);
      END IF;
    END IF;
    -- --------------------------------------
    -- This part outputs the DATA to file
    -- --------------------------------------
    IF NOT v_samefile THEN
      v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_data_file,p_utl_wra,32767);
    END IF;
    --
    d := DBMS_SQL.EXECUTE(c);
    LOOP
      v_ret := DBMS_SQL.FETCH_ROWS(c);
      EXIT
    WHEN v_ret    = 0;
      v_finaltxt := NULL;
      FOR j      IN 1..col_cnt
      LOOP
        CASE rec_tab(j).col_type
        WHEN 1 THEN
          -- VARCHAR2
          DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        WHEN 2 THEN
          -- NUMBER
          DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_n_val);
        WHEN 12 THEN
          -- DATE
          DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_d_val,p_dateformat);
        ELSE
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        END CASE;
      END LOOP;
      --
      v_finaltxt               := p_prefix || v_finaltxt;
      IF SUBSTR(v_finaltxt,1,1) = p_delimiter THEN
        v_finaltxt             := SUBSTR(v_finaltxt,2);
      END IF;
      --
      FOR i IN 1 .. ceil( LENGTH( v_finaltxt ) / v_chunksize )
      LOOP
        UTL_FILE.PUT_RAW( v_filehandle, utl_raw.cast_to_raw( SUBSTR( v_finaltxt, ( i - 1 ) * v_chunksize + 1, v_chunksize ) ), TRUE );
      END LOOP;
      UTL_FILE.PUT_RAW( v_filehandle, v_CRLF );
      --
    END LOOP;
    UTL_FILE.FCLOSE(v_filehandle);
    DBMS_SQL.CLOSE_CURSOR(c);
  END create_large_csv;
  

• Lenovo IdeaPad K1 and accepted the micro sd cards!

  The Lenovo IdeaPad K1 accept micro sd cards, if yes, what is the accepted maximum size?

  Don't know it must a SDXC or not, so all I can say is what I have in mine, and it is a 32 GB SDHC.

• Transfer of data from the old and new Mac

  Hi folks, I'm acquires a new iMac, PC (with Retina 4 K display 21.5 inch iMac) to replace my current iMac (21.5 inch, mid 2010). I sold my existing iMac and will have to ship power off before receiving the new unit, ergo, I won't be able to use the method of transfer of my data from the old to the new Mac.

  Accordingly, I am looking help form to advise me how can I do to preserve my existing Mac data so that I can install on the new Mac. In addition, how to delete all my data from the old Mac but preserve the OS X (El Capitan) and relevant applications.

  All of the advice and recommendations will be greatly appreciated

  1. create a Time Machine backup or clone bootable on an external drive, and then migrate your data from it.

  2. you need to remove El Capitan of the old Mac before send you it off and return it to the most recent of its original operating system or 10.6.8.

  (137493)

• How to save data from the COM port to file?

  Hi all

  can someone tell me please how to save data from the COM port on file? I transfer 1 byte of serial port... attached is the image of the vi... very basic.

  I would like to save the data in a table... I mean, 1 data--> data--> data tab 2 tab 3rd--> tab

  and so on... can anyone help?

  
  

• Store data from the Serial Port in the buffer and then take action?

  Hello! Everyone,

  I'm new to LabVIEW and I take assistance from various videos and stuffs available online to get started with LabVIEW.

  But I have a duty, therefore needing help.

  initially I see some of the tutorial videos and learned about the LabVIEW interface, and does a little project to communicate with the Port series (receiving and sending data).

  Happens to my task.

  My LabVIEW application will send a few State request packets on my device or control and based on the response packet that I have to display values.

  The Structure of package is as

  Header, length, Op_Code, data Checksum

  There is no terminator as newline or carriage return or anything else.

  In C language, I read the data from the Serial Port, and based on the length, I conclude that I got the full package or not, and then by recalculating the checksum value, the integrity of the package is verified and then based on that Op-Code has been sent will be decided.

  (I'm dealing with hexadecimal data)

  But how can I do this in LabVIEW.
  A tutorial or any referece will be useful for me.

  1. I suggest that you learn to use Shift Registers instead of local and global variables.  They are much more efficient (memory and execution speed) and make it much easier to read the schema.

  2. you don't need this inside the loop property node.  Is there a way to configure a Serial Port to turn off the stop character.

  3. you don't need to wait for playback VISA will limit the rate of loop if no data is coming.

  4. Once you have the length, you simply read the rest of the entire message and process it at a time.  This will make things a LOT faster.

  5. you should really do this enum a def type so that you can ensure that all your enum constants have the same values.  If you need to add a State later, simply update your enum in the same place then.

  

• VI data on average compared to the data from the Excel file on average .lvm

  I am trying to build a .VI to measure voltages on a channel of a transducer of pressure for a period of 3 minutes.  I would like the .VI to write all the samples of blood to a file .lvm with another .lvm file that comes from the average voltage over the period of 3 minutes.  I built a .VI making everything above so I think that... The problem I'm running into is when I opened the file .lvm of all samples of blood in MS Excel and take the average of them using the built-in Excel function (= AVERAGE(B23:B5022) for example) averaged and compare it to the .lvm file, which has just 3 minute average .VI voltage, they do not correspond to the top.

  This makes me wonder if I use VI with an average of function correctly or if maybe VI averages data different voltage than what is written in the .lvm file.

  Does anyone know why the two averages are different and how I can match.

  I have attached a picture of my functional schema with the file .VI for clarity.

  The Type of dynamic data of LabVIEW you use is a special data type that can take many forms.  It therefore requires the use "Of DDT" and "DDT" for the conbert to and from other data types.  These special conversion functions can be configured by double-clicking them and specifying the format you are converting from.  You can find the functions on the pallet handling Express-Signal.

  I've attached a screenshot of the modification of the code using the "DDT" and the average is very good.

  Please mark this as accepted such solution and/or give Kudos if it works for you.  We appreciate the sides for our answers.

  Thank you

  Dan

• Cannot use a CSS file to display from the rafters in the sensitive HTML output

  We use a CSS file to add styles to characters in some of our content. It works by using the WebHelp output, but when we exit to HTML5 reactive, rafters are not displayed. Here is the code in the CSS file:

  span. KeyName {}

  make-weight: normal;

  do-variant: small-caps;

  }

  span. KeyName: before {}

  content: ' < ';

  }

  span. KeyName: after {}

  content: ' > ';

  }

  This part of the CSS file should just define content relevant to small capitals and wrapping brackets around it. When you look at this style in the Styles dialog box, it does not display the rafters in the preview window, then perhaps there is a clue as to what is at the origin of the problem. We use RoboHelp version 11, but get the same problem with the 2015 version. Any advice would be appreciated.

  I'm not a CSS guru, but I know that the output files are different from the source. My gut tells me that the build process is originally munging of the CSS in the output. I tested by copying your code and pasting in one of my CSS and applying the style. As you say, WebHelp was beautiful and the media were there but more responsive, they were absent. But when I copied the CSS from the source to the output, the reactivity is actually media.

  When I compared the differences, what seems to happen is that in the CSS source there are quotes that surround the characters of your choice and in the output, the quotes are ejected. So workaround seems to be either simply change the CSS output after generating or just copy the CSS source produce by and replace with her output.

  :

  See you soon... Rick

• How to create a file of data to the remote server...

  I need to create the data to the remote server file...

  When I tried to create using the command

  create tablespace XXXC_DATA Datafile

  ' \\1XX. XX. X.XXX\TestSVR_Share\CCC\oracle\Datafiles\CCC_DATA. DBF'

  size 10 m

  autoextend on

  next 10 m

  MaxSize unlimited;

  

  I checked the local policies.

  (I am an admin user and I added 1) access this computer from the network 2) Act as part of operating system and update of local policies

  It did not work.

  so I've mapped the shared location and run ogical below command

  create tablespace XXXC_DATA Datafile

  ' Z:\TestSVR_Share\CCC\oracle\Datafiles\CCC_DATA. DBF'

  size 10 m

  autoextend on

  next 10 m

  MaxSize unlimited;

  

  Can anyone help on this.

  It does not matter if * you * have access to this shared directory. This is important if the user used to run Oracle.

  When you access the Services application in Windows (I assume you are the DB on Windows), double-click the Oracle service for the database in question and go to the tab "Log On", it is * that * the user who must have access to the directory is shared. If you have "Local System" set as a user, you will need to change this.

• Is it possible to see/get the data from the table to a dump file

  I have files dmp generated using expdp on oracle 11 g...

  expdp_schemas_18MAY2013_1.dmp

  expdp_schemas_18MAY2013_2.dmp

  expdp_schemas_18MAY2013_3.dmp

  Can I use a settings file given below to get the data from the table in the file sql or impdp the only option to load the data of table in database.

  VI test1.par

  USERID = "/ as sysdba".

  DIRECTORY = DATA

  dumpfile=expdp_schemas_18MAY2013%S.dmp

  SCHEMAS = USER1, USER2

  LOGFILE = user_dump_data.log

  SQLFILE = user_dump_data. SQL

  and impdp parfile = test1.par.

  No,

  DataPump cannot retrieve a dumpfile data in a flat file.

  Dean

• ORA-03297: file contains data beyond the requested value of RESIZING

  Hi all
  I am trying to increase the size of my space of system tables. The tablespace contains a data size 900MB file and it may increase to 2 GB.
  I would like to change this to autoextend I'll operate on the database csscan.
  When to change the autoextend and unlimited file I get: ORA-03297: file contains data beyond the requested value of RESIZING
  
  I also tried to increase the data file of 4 GB, but still the same. I see that there is more then enough space on the file system.
  Need help.
  Oracle Enterprise edt 10.2.0.5
  Concerning
  933746

  The first statement is that originally the problem - you try to shrink the file, develops it not.

  The autoextend (second statement) should be fine as is.

• Read data from the file into ArrayList

  Hello
  I have a class called product describing the charactristics of products such as the name, id, price etc.. I have the whole set and use the get methods in my class of product. I store the information on my products in an ArrayList. I can write the information on my products in a file.
  so far, but so good...
  
  I want now to re-read the data from the file and store it in my list of tables again. I know I can use Parsing and read in data in an ArrayList as String, int, double etc. but is anyway to read in from 'Product' (then it would be up to my class of product)?
  
  Thank you in advance.

  1. are you aware of serialization?
  2. get a name, I love not dealing with numbers.

  DB