Lenovo K5 VIBE more don't connect EDGE

Similar Questions

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.

• Ask about OTG on Lenovo A6000 support more

  Hello

  I want to know if the new Lenovo A6000 launch more (launch on flipkart, 28 April 2015) a OTG, supported or not.

  Kind regards

  Vipin

  Well I just updated some information.

  The A6000 '+' is not supported by the OTG.

  Difference between A6000 vs A6000 + is only A6000 + 2 GB of RAM and 16 GB ROM.

  I hope this helps.

• I can connect is more to my connection Wireless on my HP ProBook s 4430.

  I can connect is more to my connection Wireless on my HP ProBook s 4430.  The problem occurred after I allowed the Wizard update HP.  The network card is recognized in Device Manager and claims that it works correctly and that the drivers are up to date.  However the laptop is unable to recognize the available wireless networks and the diagnosis seems to indicate that the problem is with the drivers for the network card.  After spending 2 1/2 hours online with HP tech support after you remove the current drivers and replacing witht latest and disable the NIC in whole and then by reactivating, the tech then informed me that I would need to send the computer and wait for about 1 to 2 weeks to get it back.  Any suggestions on how to solve this problem would be greatly appreciated.

  original title: wireless connection problem

  Do you have this problem is resolved. I have the same problem. follow the same steps. Nothing has worked.

  I have a HP Probook s 4430 and I can't get the wireless adapter to work!

• Lenovo Ideapad S510 guard remove WIFI connections.

  My Lenovo Ideapad S510 guard remove WIFI connections. When he falls, I have to unplug the router WIFI off and turn it on to get connectivity. Help appreciated - thanks

  Hello

  Please contact the Microsoft community.

  I understand that your Lenovo idea S510 controller keeps on WIFI connections a fall during the use of the Internet.

  I recommend you to check with the router manufacturer support you mentioned that issue gets fixed when you unplug the router.

  You may encounter network or problems of Internet in Windows for several reasons. Some common problems that can cause these problems are:

  • Corrupt or incompatible drivers.

  • Network connection settings.

  • Hardware or software problems.

  • There is interference with other devices.

  • Your router and your PC network card can not work together.

  I suggest you follow the below troubleshooting methods and check if it solves the problem.

  Method 1: Run the network adapter Troubleshooter

  If you cannot connect to a network, it could be a problem with your network adapter, the piece of hardware that allows your PC to connect to a network.

  First of all, try to use the network adapter troubleshooting utility to automatically find and fix some problems. This troubleshooting will be disable and re-enable the adapter and try a few other common repairs. Here's how:

  1. open the Control Panel by right-clicking on the Start button.

  2 in the search box, type Troubleshooting, and then click Troubleshooting.

  3 click network and Internet, run the utility network adapter troubleshooting, and follow the instructions

  on your screen and check.

  Method 2: Uninstall the network adapter driver and restart

  Try to uninstall the network adapter driver, and then restart your computer and have Windows automatically installs the latest driver. Here's how:

  1. right-click on Start, select Device Manager and navigate to the network cards > network adapter

  name.

  2 right click (or press and hold) the network card, and then select Uninstall > remove the driver

  software for this device box > OK to confirm that you want to uninstall.

  3 after uninstalling the driver, click on the Start button > power > restart.

  After restarting your PC, Windows will automatically search for and install the network adapter driver. Check to see if this solves your connection problem.

  If she does not then install download / install the driver from the websites of the manufacturers of Lenovo.

  I hope this helps. If the issue is not resolved, please get back to us and we would be happy to help you.

• No sound when don't connect speakers

  original title: record play sound I turn on my computer for the Dell Latitude 4310 and when I plug my speaker cable in I can't hear anything at all and need help

  need help on what to do about why I don't hear any music when I connect my speakers to my new laptop Dell Latitude 4310?

  Hello

  1. What is the operating system installed on the computer?
  2. are you able to hear the music from the internal speakers?
  3 do you mean to say that when you connect the speakers, you are unable to listen to the music, is that correct?
  4. don't you plug the speaker to another computer and check?

  I suggest you to follow the steps from the link and check.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Refer for more information
  No sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  If necessary you can download the audio drivers from Dell here website: http://www.dell.com/support/drivers/us/en/04

  I hope this helps.

• SQL more unable to connect (computers connected via a DSL router)

  Hello!
  
  I have two computers connected locally via a DSL router. His IP address is 192.168.1.64 IP of the other is 192.168.1.65.
  "I'm trying to connect to 192.168.1.64 via SQL more 192.168.1.66 by running the following command: sqlplus system@"192.168.1.64/orcl.168.1.100 "and receive this error message:" ORA-12170: TNS: Connect timeout occurred. " I thought it was the default Windows Firewall that has caused this and changed the windows firewall settings in 192.168.1.64 adding port 1521 in the list of windows firewall. Now, I get this error: "ORA-12541: listener TNS:no.»
  
  Published by: totalnewby on June 12, 2010 10:53

  totalnewby wrote:
  Hello!

  I have two computers connected locally via a DSL router. His IP address is 192.168.1.64 IP of the other is 192.168.1.65.
  "I'm trying to connect to 192.168.1.64 via SQL more 192.168.1.66 by running the following command: sqlplus system@"192.168.1.64/orcl.168.1.100 "and receive this error message:" ORA-12170: TNS: Connect timeout occurred. " I thought it was the default Windows Firewall that has caused this and changed the windows firewall settings in 192.168.1.64 adding port 1521 in the list of windows firewall. Now, I get this error: "ORA-12541: listener TNS:no.»

  Published by: totalnewby on June 12, 2010 10:53

  =================================

  Suppose you have the following in your tnsnames.ora:

  Larry =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = myhost) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = curley)
  )
  )

  Now, when you issue a connect, say like this:

  $> sqlplus scott/tiger@larry

  TNS will appear in your tnsnames.ora for an entry called "larry". Then, tns sends a request to (PORT = 1521) on (HOST = myhost) to aid (PROTOCOL = TCP), requesting a connection to (SERVICE_NAME = curley).

  Where's (HOST = myhost) on the network? When the request is passed to tns to the next layer in the network stack, the name "myhost" resolves to an IP address, either via a file 'hosts' local, through DNS, or possibly other mechanisms being used less. Alternatively, you can hard-code the IP (HOST = 123.456.789.101) in the tnsnames.ora.

  Then, the request arrives at port 1521 myhost. If all goes well, there is a listener on myhost configured to listen on port 1521, and this listener knows SERVICE_NAME = curley. If so, you'll be connected.

  A few important points.

  First, the listener is a process only the side server. It's all in life seeks applications for reception for connections to the databases and set up these connections. Once the connection is established, the listener is out of the picture. It creates the connection. It does not support the connection. A listener, linking an oracle of the House, listening on a single port, use multiple instances of database in several versions of several houses. It is unnecessary complexity to try to have several headphones. It's like the telephone company, to build a separate table for each customer.

  Secondly, the tnsnames.ora file is a client-side problem. Its purpose is to address resolution - the equivalent of the 'hosts' file tns further to the bottom of the network stack. The only reason it exists on a host computer is because this machine also can run client processes.

  What can go wrong?

  First, there may not be an entry for 'larry' in your tnsnames file. In this case, you get "ORA-12154: TNS: could not resolve the connect identifier specified" no need to go looking for a problem on the host, with the listener, etc.. If you cannot place a phone call because you do not know the number (cannot find your phonebook (tnsnames.ora) or can not find the party looking for listed in it (no entry for larry)) you don't look at problems at the switchboard.

  Perhaps the entry for larry was found, but myhost could not be resolved to an IP address (for example there is no entry for myhost in the local hosts file). This will mean by "ORA-12545: Connect failed because target host or object does not exist.

  Maybe there is an entry for MyServer in the local hosts file, but it specified a bad IP address. This will mean by "ORA-12545: Connect failed because target host or object does not exist.

  Maybe the INVESTIGATION period was good, but there is no listener running: "ORA-12541: TNS:no listener.

  Maybe the INVESTIGATION period was good, there is a listener to myhost, but he is listening on a different port. "ORA-12560: TNS:protocol adapter error.

  Maybe the INVESTIGATION period was good, there is a listener to myhost, listening on the specified port, it's unknown SERVICE_NAME = curley. "ORA-12514: TNS:listener is not currently of service requested in connect descriptor.

  =====================================

• iPhone 6s more don't stop alert sounds

  My 6 s iphone more continues to make sounds to alert even if there is nothing to report. No messages, no emails,

  nothing on the notification Center, without badges.

  I tried to disable notifications, hold the home and power at the same time buttons... nothing seems to work.

  Only the do not disturb button seems to offer a peace of mind.

  I had never experienced this before.

  Everyone know the same question? This could be a bug?

  Any suggestions or advice?

  Thank you in advance.

  PS The problem persists even with the do not disturb button on.

  Usually it's the opposite - people don't get notifications that they should.  The only advice I have is a restart, forced to reboot, restore the backup of the form and finally restore as new - in this order:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

• wired devices is more capable of connecting to time capsule

  Wired devices connected to the time capsule apple are assigned is no longer an ip address and not able to connect to the internet. Always wireless devices connect very well without any problems.

  Gites assign addresses IP not work

  The capsule is connected via PPPoE modem of fibre broadband BT openreach

  Any ideas?

  Wireless devices get the private IP address of the TC... Please check.

  for example... the TC in standard configuration as a router will use 10.0.1.x for the first device is 10.0.1.2

  The values of the gateway and DNS will be 10.0.1.1 on the laptop... check and report what are the numbers.

  On the ethernet connected machine... see if you get anything... Otherwise, set an IP address static, for example 10.0.1.201 with gateway of 10.0.1.1 and the same DNS... Does it work... If this is not the case, change the Google public DNS. 8.8.8.8

  It might also help to post some screenshots of the configuration of the TC if you still have questions... tab tab and internet network more summary page.

• Satellite C50D - B - 11 X more difficult to connect to internet

  Hello

  I have a Toshiba Satellite C50D - B - 11 portable X. He was about 6 months, and had nothing but problems from day one. Really wish id increased for the next. But stuck with it now.

  I have internet wifi which is very fast and reliable in my area. However as the months have passed, the laptop has gone in and out of the internet reception and is gradually degraded.

  All of a sudden does not connect to internet, sometimes for a few minutes, but which a strung out to several hours sometimes now. I went on the site of toshiba and updated all my drivers etc.

  And I was using aid cable directly from the internet area of sky to the portable computer, which worked a treat for a few weeks but now is doing the same thing. Internet works for a little while, then refuses to do anything. Said that there is no internet connection at all times. But there isn't...

  There is absolutely no problem with the internet, im typing this on my work laptop partners that is connected via wifi and NEVER has problems with internet, works perfect contiouusly and still works 100% even if my lapop Toshiba immediately next to it has a fit of anger.

  What can I do?
  If anyone can help?

  Thanks in advance

  Hello

  Can you confirm that the problem of internet connection is displayed using LAN and WLan connection?

  Have you tried to connect this laptop to another WiFi in your area? IE test connectivity in relationship with the neighbour s WLan.

  In case you have the same problem with LAN and WLan, I think only one kind of software (some of the antivirus or security settings) which is always preinstall on this laptop could cause the problem.

  In my opinion, you should recover the laptop back to factory settings and should test the functionality of the laptop once more without any 3rd software installation part.

  Check the internet connection by using different browsers like IE, Firefox and Chrome.

• iPhone 6s more does not connect Internet (wifi) for computer

  I bought my iPhone 6 s more, March 1, 2016 and I had too much give in the service of apple to see what it was when first it wouldn't connect to iTunes and sharing network from the phone. They checked and found no problem but my iPhone won't share Internet from my phone to my computer (return my phone today). the computer detects my phone but not able to connect to the network? What can I do because this is the second time I have trouble with an iPhone that is brand new!

  How do you try to connect your phone to your computer? Do you want the computer to use the Internet connection on your iPhone? To do that you must contact your carrier and make sure that "tethering" is activated on your iPhone account. Then turn on the 'Personal Hotspot' (in settings/iCloud.) Your computer should then see your iPhone as a wireless router. See this for more information: share your Internet connection with Personal Hotspot - Apple Support

• IPhone s 6 more does not connect to MacBook Pro

  I have a MacBook Pro (retina, 15 inches, mi 2014) 2014, 2.5 GHz Intel Core i7 processor! 6 gb 1600 MHz DDR3,

  Intel Pro Iris 1536 MB OS X EL Capitan. I checked the LMP bluetooth under system reports and the LMP version

  0x6.  I'm trying to pair a 6s iPhone more Version 9.2.1 (13D 15), model MKV92LL/A this phone is brand new.

  When I try to pair the two of them, he said MacBook Pro not supported.

  Also when I turn on my Mac it automatically shows the messages and gives me a code to enter. I go to Messages

  Select text Message Forwarding and enter the number. He'll be right back with another number and starts

  start all over again. When I try to close it, it just continues to do it.  I am connected to iCloud on both devices using the

  same apple ID. I also email and phone numbers boxes checked to receive messages from these two places.

  This is the first time I had all the important issues with my apple devices. I had a small problem connecting my

  my ear buds but Jawbone after a certain time has been able to fix it. I did countless research on this matter and did not

  haven't found a solution.  Please help one of the reasons why I made the switch from apple was integration. I was really looking for

  before you can use the hand off and all the other things that I should be able to do with these 2 devices.

  Thanks Steve cut Frame to finish

  Matching of an iPhone to a Mac is not supported. If you want to move the data, there are some options... Parachuting is a.

  Barry

• Overheating Lenovo Z2 Vibe Pro

  I thought that the last update solved sw overheating in this phone?

  I could play only 3 minutes of play and the appliance starts to heat. Example of games is real boxing and my God, the same free fall. I play these games in my old note 2 and I do not meet an overheating.

  Everyone knows the same?

  Please help lenovo!

  My general opinion is that all PRO Z2 overheating on relatively simple games, you do not need to check in the servise Center if it is just hot and you can hold it still - this is normal. They don't have an effective way to cool the powerful processor in my opinion. If it gets hot like you can't hold anymore, your figers are almost buring and phone starts to fail etc then go to service center - this should not be the case however with the Z2 Pro.

• Lenovo Center's Solutions don't poster not updates to driver/BIOS?

  Hey all,.

  Got a new 55-H50 (AMD) and G50-45 today and updated everything, including the LSC. Desktop or portable LSC say to go to the Lenovo website for updates to the firmware/BIOS, and they both require BIOS at least. I can not really work if nothing else needs to be updated or not.

  Any suggestions?

  Thank you

  Callum.

  I don't think that it has no application to display updates of drivers or software outside the brand of products that come with the thinkvantage system update, think

• Vibe Shot Marshmallow rarely connect via 4G

  for some reason any
  After the update my sim card will rarly connect via 4G
  It will usually stay on even worse H + or 3G
  I never faced this problem in lollipop

  Note from the admin; subject edited for clarity

  I guess that the reset has been done? 4G is stable with the telcos here and no reports of slow via WLAN or data so after M.