Lenovo laptop z500 does not

Similar Questions

• Lenovo IdeaPad Y560 does not load, battery and charger are OK

  My 3 year old Lenovo Y560 laptop i5 does not load when I turn on with the battery in it everything works normally, but when I plug in charger nothing happens. I checked the charger and it works great, its output is stable 20V. When I remove the battery and try to power the laptop with charger only, LED indicators light up for half a second and nothing happened. With closed laptop battery and charger plugged in, battery light flashes orange, about 3 seconds 10, without the battery even after several hours. I had no problem with jack for charging so far, so I think that is not due to a problem. I tried something with the power for 30 seconds button now and it did not work. Does anyone have the same problem or at least an idea of how to solve this problem?

  It seems that your charger is broken despite the supply voltage. My guess what it cannot deliver sufficient power. Try to find someone with the same charger (voltage, socket and polarity must be the same. There may be several amperes/watt) and try to use it. If you do not know someone who might have a charger as it try stores electronics or services.

• computer HP laptop, 2000 does not recognize tv with a hdmi cable

  my computer hp laptop 2000 does not recognize tv with an hdmi cable.  I get the error "does not recognize any other monitor" when I try to "detect".

  I have recently upgraded to windows 8.1

  I have the graphics card AMD Radeon HD 6310

  The TV is a Phillips HD TV hotel.

  My game system works using VGA cable

  Any help would be greatly appreciated.

  Hi Ringerbell,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP 2000 and connect an external TV tuner. Here is a link to connection and external display. Here is a document onthe configuration ofyour laptop to use the monitor.

  Hope this helps you.

  Thank you.

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP pavilion laptop computer does not start

  When I turn on my laptop it does not start. It goes to a blue screen that indicates it should be repaired. Help please

  Hello

  Error code 24 characters long drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Laptop speaker does not

  My laptop speakers does not sound. Some time its work but its very low, especially it does not.

  I use HP laptop core i5

  product no. C5B28EA #A2N

  Model no.  G6-2275sx

  Operating system-windows 8

  No error message

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Lenovo ideapad sound does not

  Lenovo ideapad sound does not work as sound card and verified drivers working properly, earlier that I had uninstalled applications unwanted with revo uninstaller and removed from the list of left over files Scan of revo uninstaller please give any suggesion.

  Hello

  Method 1:

  You can run the fix - it from the following link.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2:
  You may need to rebuild the database of Windows Media Player.
  Here's how:
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  Method 3:
  Uninstalling and reinstalling Windows Media Player:
  Step 1:
  Uninstalling Windows Media Player:
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer
  
  Step 2:
  Reinstall Windows Media Player
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  For more information check out the following link.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I hope this helps.

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• How to install lightroom to a new laptop that does not have a port lightroom... but CD is a cd.

  I'm upgrading to a new laptop that does not have a port of cd... BUT my lightroom 5 autonomous is a cd. What is the fastest way to install it? Y at - it a link to the stand-alone lightoom can I download online then enter my product key after installation? I don't think that the link to download CC LR works for semi-bas must be autonomous.

  Thank you.

  You can download the standalone version from here:

  Updates

  Run the Setup and use your existing Lightroom 5 serial number. This serial number has 24 numbers, the first four are 1160.

• How can I load my CS5 on my new laptop that does not have a hard drive?

  How can I load my CS5 on my new laptop that does not have a hard drive?

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Lenovo B50-50 does not recognize my external hard drive

  I recently bought a laptop Lenovo B50-50 and it does not recognize my external hard drive. It's a WD elements with USB 3.0 storage device. I tried a few of the fixes recommended on other forums, but none of them work. The hard drive comes up is the list in Device Manager, and all my usb drivers are up to date. The hard drive works perfectly on other devices. Other work of readers of fine nib. Normally when the hard drive connected to the aa one device in flashing lights. This does not happen when I connect it to my laptop.

  Any help much appreciated.

  Make sure you use your laptop, 3 USB ports, not then a USB 2 port to see if one will work. If it does not power up to contact Western Digital for support.

  Good luck.

  CB

• Lenovo thinkvantage DVD does not play after W - 8

  Laptop of Lenovo Thinkvantage running Vista Home Basic. I upgraded to Windows 8, now my DVD does not play when I insert a Dvd.

  LENOVO 3000 G530 444623U. The DVD player plays the tracks on a disc of music, but will not play a dvd-video... MANUFACTURER IS MICROSOFT

  Hello

  Whether you use Vista Basic, the chances are that your Lenovo may not Compatible Windows 8.

  Have you checked to the Lenovo Web site for support of Windows 8 before installing it?

  And see if you meet the system requirements.

  "System requirements" Windows 8 ".

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And you should ask your questions in the Windows 8 Forums, not the Vista Forums.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Hardware?tab=QnA&status=all&mod=&modAge=&advFil=&postedAfter=&postedBefore=&TM=1374267632703

  See you soon.

• The built-in on my Lenovo Thinkpad webcam does not work

  I have a lenovo thinkpad and the built-in webcam does not work. It does not even appear on my device manager (or anywhere on my computer also).

  Everywhere wherever I look I keep seeing the words "drivers." I don't know what makes a driver is, so if someone could help me in using the language more simple that would be very useful.

  Thank you!

  "driver software is a computer program that operates or has a particular type of device that is connected to a computer.

  See the device driver

  What model of Thinkpad do you use?

  Lenovo Web site, click on Support, click on drivers & software, click computers laptops & tablets, select Thinkpad series, select the exact model of Thinkpad, select Machine type and search for the driver and application for the model of your Thinkpad. Download and install the driver for the webcam from here to solve the problem.

• HP250G4 (M9S81EA): the laptop computer does not see the usb cable

  Hello, have a problem with HP250G4 (M9S81EA), doesn't want to install cable diagnostics. After you install the cable drivers, win10-64 cannot define it. All the drivers are installed on your laptop and work properly. The cable is the same worker checked on another laptop. None of the Google tips help not hurt for 3 days with this problem. I hope for your help.

  USB device not recognized
  Works Yusb last device connected to your computer, and windows cannot identify him.

  The request failed usb device descriptor

  I installed on this laptop Win 7.8.10 and the unit still does not work, I think it's a hardware problem of the laptop. But at the same time, other usb devices are working properly on...

  < feature name = 'Application' type = 'Description' sequence-id = "3" >
  < attribute name = "a0" value = "HPAdvSysDiag_USBPort" / >
  < attribute name = "a1" value="5.9.0.0"/ >
  < attribute name = "a2" value = "2" / >
  < attribute name = "p1" value = "09/11/2015" / >
  < attribute name = "p2" value = "F.1A" / >
  < attribute name = 'p3' value = "96.39" / >
  < attribute name = "p5" value = "" / >
  < attribute name = "p15" value = "2" / >
  < attribute name = "p16" value = "0" / >
  < attribute name = "p17" value = "0" / >
  < attribute name = "p20" value = "00000001" / >
  < attribute name = "p4" value = "1" / >
  < attribute name = "p0" value = "2015-12-26 22:45:56" / >
  < attribute name = "p10" value = "0" / >
  < attribute name = "d15" value = "F3" / >
  < attribute name = "a4" value="00.00.00.34"/ >
  < attribute name = "d0" value = "3" / >
  < attribute name = "z0" value = "94L7PW-7R07T8-XD7WMF - 8 d" 7403 "/ >
  < attribute name = "e0" value = "434" / >

  Help someone or not?

• Portege R100 laptop computer does not start after a while without food

  Hello

  Well there is some time, I bought a beautiful used R100 - a laptop Toshiba in passing - but now, she has developed an annoying problem. Whenever it disconnect the laptop from the power supply for more than 2 hours about (don't know if this is not longer) I can't begin the R100, even if the battery indicator is green. After pressing the powerbutton the power led lights in green, and nothing happens. The "solution" to this problem is to give the R100 some time in this 'turned on' - State and after 15 minutes, I am able to start the computer (turn market again).

  I think that this could be a problem with a battery on the motherboard that is at its limits and needs time to gather enough power to start the computer.

  I hope you can help me identify the problem with my beloved laptop :)

  Yours,

  Tobias

  p.s. I have more or less need to identify the problem and some tips how to solve - the pleasure with the surgery will be from me :)

  p.p.s. Unlike the problem of the M400 further down, I've won if the beginning focused on the hard disk to Flash. In my case the R100 does not give a glance if it does not start. - And as a reference to the other post: "Hmm, I don't remember of the R100 fan not have it at all" * huggs its r100 * "."
  And I tried unplugging all the bits of the laptop and removed the battery, waited 15 minutes and tried to turn it on. the only way to obtain the departure of r100 is the method described above.

  You have an additional RAM installed?

  Maybe you need to re-seat, or it has a intermittent or heat associated with problem.