Lenovo M93p SCCM PXE boot

Similar Questions

• Portege Z30-C-10N is unable to boot from PXE - boot MSC mode required

  Hello

  I received a trial Z30 - C - 10N Toshiba to test our image deployment with. We use SCCM via PXE boot to deploy our images but unfortunately the laptop cannot boot from PXE, even after trying different methods of boot (secure boot is disabled). After doing some research on Google, many people say that the CSM boot mode is necessary, but it is not available in the current BIOS on the Z30 - C.

  So I just wonder is there plans to release a BIOS update soon with added support boot CSM?

  Any help is greatly appreciated.

  Russ

  I believe THAT CSM is in the latest version of the BIOS.
  Updated the BIOS and see how it goes.

• T610: Light customer T610 remains stuck in the PXE boot

  I'm currently converting our customers light windows t610 meter above the zero smart software. I had zero problems with windows pe, but on the test batch of 30 thin clients that I installed and configured for smartzero, I'm having a problem. Whenever they are restarted, sometimes they will come upward to the PXE boot instead of booting from the hard disk and the only way to get them to boo back to the hard drive is physically draw power. Anyone has any ideas on this?

  Don't know how you have configured the server, SCCM, but as far as I know, it might be possible to program the network boot as the only method of priming via SCCM.

• X 1 carbon PXE Boot issues

  First of all Hello to everyone, and sorry if this has been asked / solved before... I couldn't find the option to search for the forum (its beginning, my brain is still asleep).

  I have problems with getting the carbon X 1 to perform a PXE boot, I connected to the network via the Lenovo USB / Ethernet adapter, and when I press F12 option LAN is here. This is where the problems begin.

  It you press ENTER to boot via the NETWORK card, the screen is black and the text "> on IPv4 PXE boot" is displayed, it takes about 30 / 40 seconds before heading to the start menu. He never starts with Ghost. I have double checked that I have the TFTP, the PXE server and the Ghostcast Server works (and has been tested with a Vaio).

  Anyone else see this issue? Correction of this problem?

  Thanks for reading and any help would be greatly appreciated

  
  

• Is unable to PXE boot Windows 8 models

  We load the PCs with our own operating system image as they come. The process works outside a PXE (network) boot image.

  We recently started ording the X230s even, with a license of Windows 8. Lenovo said that there should be no changes needed with our image.

  However, we cannot perform a PXE boot these machines. We stop them and align them upwards a F12 on the bios boot screen and select PCI LAN.

  We get a message saying > on IPv4 PXE boot

  It blocks it there awhile, then tries to IPv6, then goes back to her lies of boot device.

  We got a green and a yellow flashing on the network connector. And we have PXE starts outside the context of many times

  What do we lack?

  Thank you.

  Thanks for the reply.

  We found that shut down the OS OPTIMIZED DEFAULTS got the results desired for us.

• Reference Dell place 11 Pro - problems with the PXE boot

  Before buying a large number of these tablets (11 Pro 7130 venue), I have to ensure that they can be deployed from MS Configmgr (2012). So far, I have no chance for our test model to perform a PXE boot.

  Following the instructions documented by Dell here:

  

  I have a USB dongle to Ethernet Lenovo based on the AX88772B chipset... that is supported according to the documentation. However, try to perform a PXE boot, the screen hangs on the message:

  -----------

  check for the presence of media...

  on ipv4 pxe boot

  -----------

  After awhile, it starts up and then hard disk. BIOS version is A14.

  Any help would be appreciated!

  We have solved this problem by following these:

  

  

  .. DHCP basically has to manage a little different UEFI devices.

• Satellite Pro NB10 forced bug BIOS to PXE boot

  Hello

  I have the following problem with my NB10. (Bios 1.70)

  No matter how to set the boot order in the BIOS it will always try first the PXE boot. As long as no cable-net is attached it's a minor problem as it jumps quickly PXE boot screen, but as soon as I plug a cable-net, it will get stuck to the PXE boot screen, until I press ESC. The only way to get rid of PXE boot is to disable the LAN entirely, which is not really a solution.

  Bug: Not should always try before other options to boot from PXE boot with a higher priority.

  Missing feature: should be possible to disable the PXE without disabling the LAN entirely. PXE boot can be a potential security risk, so it would be nice to turn it off when it is not necessary.

  I filmed this issue and put it on youtube: https://www.youtube.com/watch?v=MZsOc2ny3VQ

  I replaced the HARD original with an SSD drive and installed Fedora 22 rather than Windows 8.1 - I don't know if any of these actions is the cause of tripping for this bug.

  I replaced the HARD original with an SSD drive and installed Fedora 22 rather than Windows 8.1 - I don't know if any of these actions is the cause of tripping for this bug.

  Of course, the BIOS does not recognize the boot (Linux) on the SSD drive partition and so the BIOS will automatically switch to the next (in the case of LAN) start device.

  I wonder if the same question would appear using the real HARD disk and the image of Toshiba winning 8.1 pre-installed.
  Can perform some tests?

• Portege Z30 poster ipv4 and ipv6 - only pxe boot is

  Hi all

  Toshiba Portege Z30

  We do all our installs via PXE, when you press F12 I get now two network options where normally I would just get a.

  F12 gives the following options:

  HDD/SSD: SAMSUNG SSD SERIES
  LAN1: IPv6
  LAN2: IPv4

  When I select the option I get what follows read (IP addresses were not included, but are correctly pointing to the right servers):

  ------------------------------------------------------------------------
  > On IPv4 PXE boot.
  IP address of the station is *. ***. ***. ***
  IP address of the server is *. ***. ***. ***
  NBP filename is SMSBoot\x86\wdsnbp.com
  The NBP file size is 30832 bytes
  Download the NBP...

  Succeed to download the NBP file.

  Download the NBP...

  Succeed to download the NBP file.
  Press a key to continue...
  ------------------------------------------------------------------------

  I tried searching through the BIOS settings but can't find nothing obvious

  Can any advise if there is anything I can try to get this laptop to perform a PXE boot please

  Let me know if you need additional information

  Kind regards
  Steve

  Looks like your server isn't aware UEFI.
  Try changing the the CSM UEFI Boot Mode in the BIOS under the Advanced tab, under System Configuration. You may have to disable Secure Boot first.

• RIS and PXE boot does not

  I'm trying to start a toshiba SP6100 of ris, but is
  PXE - T01:File not found
  PXE - E3B: TFTP - file not found error
  PXE - MOF: Exit Intel PXE ROM.

  No problem what so ever while booting other mashies (other brands).

  When you try to boot from a remote boot disk, I get:
  Error: Could not find a supported network card...

  PC is running the latest bios (1.9)

  Any suggestions?

  Hello

  I found interesting the Article Q304992 Microsoft Knowledge Base.

  It deals with the method of PXE Boot and RIS server, maybe he could help you!

  Bossi

• Deploy a Lenovo with SCCM and enable Bitlocker during deployment?

  Hello!

  Anyone got information about TPM activation and activate bitlocker during the deployment of the new Lenovo with SCCM?

  Something like that but for Leonovo

  http://www.nullSession.com/2010/12/02/enable-TPM-in-task-sequence-with-SCCM-and-CCTK/

  Thank you, Magnus

  You can automate the secure TPM activation process, please see my post in another thread:

  http://forums.Lenovo.com/T5/ThinkVantage-Technologies/activate-TPM-chipset-and-suppress-F10-at-reboo...

  Any questions, let me know

• Satellite A25-S207: how to force the PXE boot?

  Hello

  I have a Satellite A25-S207 and a big problem!

  I want to start my laptop using PXE to install Suse Linux. I already did 3 months ago. It worked perfectly, but at that time, I did start command configuration using the utility on Windows. I had to install Linux PXE, because my CD drive does not work.

  Now, to complete my tragic situation, my HD failure! As long as my CD-ROM does not work, the only way I can at least try to bring my data partition is trying to reformat the system partition, install Suse and copy the data in my office. At least until I can buy another CD-ROM unit.

  But how do I set the BIOS to boot from PXE without the utility of Windows? I know that by pressing the C key while booting, the CD-ROM startup is enabled, but does anyone know a similar option to choose the PXE boot?

  I appreciate really have no idea!

  Thank you!!

  Best regards!

  Now I have I already did once, since my CD-ROM combo is 'dead '.

  If you press N immediately after laptop starting so the unit should be able to boot from the local network.
  Also in the Toshiba HWSetup under tab BootPriority PXE network boot protocol must be selected.

• Lenovo M93P, second HARD drive

  Hello!

  For Lenovo M93P, SFF, 10AJ Type of Machine, we need FRU / PN for support for a second hard drive that is inserted under the support of the hard disk existing.

  Could you please be so kind and help me get the right FRU / PN.

  Please find below the photos.

  Thank you very much in advance!

  Item 10, link:

  http://support.Lenovo.com/us/en/documents/pd027387

  

  You need to FRU 04 X 2310 additional HDD 2.5 support Assembly, SATA data cable and a cable Lenovo SATA power (he owns), or SATA power cable with angular connectors split/adapter.

  P.S., Since you're of the Slovenia, you can PM me and we can provide you with all the 3 components (I work for Lenovo dealer)...

• EliteBook 8460p ' set of factorycontrolcommand: 5 ' active Pxe boot, wwan another mode.

  A message appears on the screen during post ' game of factorycontrolcommand: 5 ' active Pxe boot, wwan another mode.

  That means, how I fix it please help! I disabled pxe boot option in the bios, but it does not help!

  BIOS update solved the problem. Thanks to a support snapshot hp!

• ProBook 6560 b: how to disable "internal NTC PXE Boot?

  Hello world

  I need to disable the internal NTC PXE boot for the sake of experimentation, but for the life of me I don't know how it's done. In the BIOS (latest version), this option is grayed out (can not click on it, even though I have the connection as an administrator), and the Configuration of the BIOS utility doesn't seem to work for me.

  Does anyone know how to do this?

  Thank you!

  -Max

  Solved this problem by uninstalling HP ProtectTools. Hope this helps anyone who has the same problem in the future.

• Workstation 9 - broken PXE boot - works with 8 workstations

  VMware Workstation 9 newly released, the PXE boot is broken. It works on the same machine with VMware Workstation 8.

  
  Virtual machine specifications:

  -Windows 7 and Windows 7 x 64

  -Bridged networking

  -2 1 processor cores

  I tried on different hardware, without Windows Firewall, but the PXE boot is broken when you use Workstation 9. Any thoughts as to why her behave this way?

  We are trying to perform a PXE boot and it gets everything stuck by sending requests for the services of pre-launch on the remote server, however, it seems that the return packets are not received. On 8 workstations, these are received and PXE boot works correctly.

  There is no AV installed in the host operating system.

  Wow, okay, just confirmed this seems to be a MAJOR bug in the work station 9, concerning ONLY to run 2 hearts or 2 CPUs. I tested with my cell phone would support all configurations (this is a quad core with hyperthreading). This applies in my case to Novell Zenworks Imaging, but can affect more.

  Results

  Config	PXE
  1 processor, 1 core	Success
  1 CPU, Core 2	In case of failure
  1 CPU Core 3	Success
  1 CPU, Core 4	Success
  1 CPU, Core 6	Success
  1 CPU, Core 8	Success
  2 CPU, 1 core	In case of failure
  2 CPU, Core 2	Success
  2 CPU, Core 3	Success
  2 CPU, Core 4	Success
  4 CPU, 1 core	Success
  4 CPU, Core 2	Success
  8 CPU, 1 core	Success

  Now here it gets crazy. My issue seems to be with the v11.2.0.0 of the Agent Novell PXE (Preboot Execution). It says "Sending queries to xxx.xxx.xxx.xxx" then he received never actually do anything to continue the boot process, but ANY other config except 2 CPU or 2 cores CPU works fine.