Lenovo T420 3.2.002 Solution Center does not display tile system

Similar Questions

• Why Windows Media Center does not display tile of Internet TV?

  Does not accept downloads

  Hello, Packard37

  You are in the US, UK or elsewhere?

  Internet TV is available only in the United States and the United Kingdom - assuming that you are located in the United States / UK:

  Check your region settings in Windows. Go to start > Control Panel > clock, language and region > region and language. On the location tab, make sure that the country is selected in the administration tab, make sure that the language is also correct as well, otherwise click the settings change system locale.

  Go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. At the command prompt, run the following command and press ENTER: start/wait %windir%\ehome\mcupdate - uf-nogc

  After you run this command, open Media Center and check if it is available, otherwise, you may need to reset the Media Center, note that this operation removes all custom settings and you will need to re-run the installation again:

  Open the command prompt, as described above once again and then type the following command and press ENTER: MediaCenterRecoveryTask - %SystemRoot%\ehome\mcupdate.exe

  One time only complete, open Media Center and run through the configuration. If you do not immediately see the Internet TV, let Media Center open for about 5-10 minutes, then restart and check if it is available or not.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hpf4135 hp Solution Center does not display the ink level now

  Hi, I used f4135 and hp ink solution if displayed for years, but now I see the white screen. Maybe I removed some drivers slender?

  Hi dimayula,

  Thank you for your answer! Please, try the following solutions:

  1. Uninstall the software. Uninstalling the printer software.
  2. Re-install the software using the printer HP install wizard for Windows.

  Hope it will be useful to you and have a great day!

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• I have a Photosmart Premium c410 series. My hp Solution Center does not work, I can't scan.

  Operating system is Windows Vista, the error message says to reinstall the printer using the installation disc.  (I did several times).  Really need to scan, but don't know how.  States of printer to the computer.  This is not the case.  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello judieKay

  Would you please provide the full model number? For example C410a. Some models are slightly different from each other and I want to assure you to give you specific information. How can I find my model number?

  Regarding the error, I checked and the following instructions should work on all models of the C410. The following instructions are for the "cleansing" or "cleaning" your computer HP printing software. This should allow you to perform a new installation of your printer and should fix your mistakes.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

• Photosmart e-all-in-one B110a: HP Solution Center does not open

  This problem began in late December 2015.  HP Solution Center worked fine until then.

  Now the printer works well, but the HP Solution Center does not open, so can not scan to computer or check ink levels.  Tried to uninstall the KB3132372 update [as suggested in this forum] and then everything works.

  However, the update (KB3132372) maintains the re-setup and hit the Centre of HP solutions again.

  Is there something wrong with the KB update that disrupts the HP driver?

  Is that what I can do through a permanent solution? (other than uninstalling KB3132372 immediately prior to scanning)

  Thank you.  Problem solved.  I admit I was a little uncomfortable uninstall security updates - but everything is OK now.

• Photosmart 6525: HP Solution Center does not work in Win 10

  I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

  Hello

  The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

  The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

  As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

  http://support.HP.com/us-en/document/c02463264

  Kind regards

  Shlomi

• HP Solution Center does not work and I can't download it despite many trials

  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello todd999

  Try instead these instructions:

  Follow the steps below to rub the software and then reinstall it.
  1. open %Temp% and delete all the files in this folder. There may be some files that may still be in use, and you can ignore these files.
  2 download the full feature software and drivers
  Photosmart C7250 software (Windows 7)

  3. double-click on the downloaded file to extract the files
  4. once the software install window press Cancel or Exit to close the Setup program
  5. type % temp % in the field run or search programs and files.
  6 find the starting with 7z folder (example: 7zS2356)
  7. right click on 7z file and choose copy
  8. close the window by %temp% and then right click in the middle of your desktop and choose Paste
  9 open the 7z folder
  10 open the Util folder
  11 open the CCC folder
  12 run the Uninstall_L4 and then follow the instructions on the screen to remove the software.
  13. when the software has been removed, restart your computer
  14. run the Accessories\ System Tools Disk Cleanup
  15 open the 7z desktop folder and run the setup.exe file to reinstall the printer.
  I would like to know if you still have the same issues?

• button to fax on the HP Solution Center does not

  OfficeJet Pro 8500 A909g. Windows 7 Ultimate 64 bit. The button of the fax on the HP Solution Center does not work. This happens periodically. How to repair? Is there a solution long term for this bug?

  If you finish this fax and had then press the fax button in the software does for much longer?  The next time you get this situation, try to restart the computer and check if the button responds more quickly.  You might see a question of resources of the computer if the computer is turned on for long periods.

• HP f4210 Solution Center does not open

  I have tried to scan pictures and now cannot start the solution center to do this. I just uninstalled the program and reinstalled. When I try to start the program, nothing happens. No additional processes appear in the Task Manager. I rebooted the computer since the reinstall twice.

  Thank you, Scott

  Hello PinballDr,

  Welcome to the HP Forums!

  I understand that the Solution Center does not open. I will do my best to help you! First of all, I need to know:

  What is your operating system on your computer? Windows.

  I would recommend this utility called the print and scan Docotor. This helps solve printing, scanning and connectivity problems, including Diagnostics: (this information is declared here.)

  • Connectivity:

• HP Solution Center does not detect that I've added a second printer

  I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.

  HP Solution Center recognizes my HP 2575 x, and everything works.

  But now I have an extra F4280 HP I want to add in via the USB port on the computer.

  First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.

  Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.

  Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.

  I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.

  How can I know the HP Solution Center to detect and add my new printer?

  Thank you.

  When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?

• HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

  I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

  At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

  I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

  I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

  I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

• HP Solution Center: my HP Solution Center does not work

  My Center solutions HP for HP Photosmart Wireless e-All-in-one printer - B110a does not work. It worked perfectly until a few days ago...

  The message says:

  "HP Solution Center cannot work because your device installation is not complete.

  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.

  "If it does not complete the installation or if you do not have the CD, access the HP help by clicking on the start menu files.

  I tried to download the software from HP but without success.

  I don't have the CD to reset the printer.

  Any solution?

  Thank you very much

  Hi @Farigola,

  Welcome to the community of HP.

  I understand that you can not use the computer Windows 10 HP Solution Center. I will do my best to help.

  Here is a link to a few troubleshooting steps that I recommend you try. When you open the link, scroll down to the section titled ""HP solutions Center can not run"or"Scan is busy or in use"error with a network-connected printer»

  HP printers - upgrade Windows 10, printer problems occur after the

  Please, try the steps and get back to me with the results.

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• HP Solution Center does not start after the installation of IE 9

  HP Officejet 7400 all-in-one

  Windows 7 32 bit

  The HP Solution Center error message

  HP solutions Center can not run because your device installation is not complete.  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.  If it does not complete the installation or if you do not have the CD, access the HP help files by clicking on the start menu.

  I've had my laptop of HP EliteBook 6930p about a month ago.  I installed the drivers and the complete HP software from HP. com without incident.  My PC came with IE 8.  Some malware named Babylon.exe infected with IE 8.  I was able to remove my registry, but caused persistent problems with IE 8.  Microsoft suggested that I have installed IE 9, which I did.   The next time I tried to use the HP Solution Center (for scanning a document), I got the above error.

  Thank you 007OHMSS (catchy name you have!)

  I thought that I had uninstalled and reinstalled the printer before I submitted this request for support forum.  However, I went back and tried again, this time using the software uninstall HP all-in-one at ALL.   I've also disabled my anti-virus from Symantec during the uninstall software, reboot and reinstall process.

  NET - the second time to work.  I seem to be without problem!

  Thank you!

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.