Lenovo T60 SCREEN black

Hello!

A problem, that I turn to you, you have a 2007 (?) OM for Lenovo T60 laptop, but today all that is that when I play a game (in this case, GTA SA) then after an add about five minutes, the screen is empty and you have to restart the machine. In that case, in principle, the GPU temperature increases up to a maximum of 75 to 80 degrees. However, when he does not attend the cooling (no), was relieved that the GPU is 90-98 degrees and not turned off.
Currently I use the Windwos XP operating system.

Thanks in advance for your answers and your help!

Hi Alex

Advertisement

Hi Eleex,

I checked with the files dump supplied by you and here is the file which is seen errors in there and as long as the link on how to solve it.

I hope this helps.

Best regards

Agnes Kumar

Tags: ThinkPad Notebooks

Similar Questions

  • T60 x 1400 victory 8.1 x 64-screen black after start-up

    Hello

    my config - T60 with ati x 1400, I use win 8 x 64 and it works fine for me.

    But I would jump up to 8.1.

    I was working on win 8.1 x 64 before, but I decided to downgrade due to a very annoying problem.

    After the closing start system again that the screen was completely black (no cursor even), but I can hear that the system is running in the background. He helped bring my laptop for the sleep/hibernate and wake up again. Black screen does not appear if I use sleep/hibernate implementation, but only if turn off pc by shutdown system.

    I have install the ati drivers for vista support page lenovo T60, avoiding "setup.exe" and ccc, only pure graphics driver, installed through properties of the graphics card.

    Earn 8 x 64 this method works very well, the 8.1 looks the same, but then this problem with black screen appeared.

    Maybe I have to stay forever on win 8...

    I wonder if anyone has had problems familiar and may have found way to solve?

    Thanks for any help.

    I work on win 8.1 now.

    After the upgrade, the screen black problem appeard again, but this time with the visible mouse pointer.

    I had to disable the "quick start" option in the power manager.

    I think I read on this solution that somewhere, but long ago had no faith in it.

    Anyway, the problem was gone, and I am a user happy windows 8.1. For a long time, I hope.

    Thanks for the help AtliJarl.

    Best regards from the Poland.

  • My lenovo ZTE A1000-G screen black but on

    My lenovo ZTE A1000-G screen black but on I can not do anything by pressing the power button / stop + flight, until the touch pwr, touch pwr + low-flying and flying up and down but nothing happened please help what I do to solve this problem, it happened when I was playing a game in the middle of a game in progress lag and when I press the power button the screen turn black, but always on it please help...

    This is my new tablets...

    (Sorry for my bad engglish)

    Hi Grenven,
    Do what I say to reset (restart) your Tablet: -.
    --> Memory location opened by card (SD card).
    -> Take something thin and sharp as a safety pin or a toothpick.
    -> Now, you will see a small hole like structure near SD card slot. (In fact it looks clearly if there is something on the inside, but there are.)
    -> Spend your pointy thing in this hole up to a certain distance. (Pass slowly inside until you hear a clicking sound)
    -> Who has the reset button which will restart your tablet of any situation.
    -> Do not lose patience while finding the reset button. Do what I say and your tab will be back normal. Find it for the first time is a little more difficult but follow my steps, and you will get it.

    Good luck...!!

  • Help! My Lenovo T60 Thinkpad too slow for life...

    Hello

    So I got my Lenovo T60 for like a year and a half, and until two months ago, it worked well enough (he got the occasional fan at first error message place however) and then all of a sudden he started bluescreening, as it would not go past the Welcome screen. So I installed Windows 7 and it worked fine for 3 weeks, then again bluescreening. So I decided to go back to XP. Establishment lasted 2 days (no, I'm not exaggerating) and since then, it takes 30 minutes just to start. And although I can't do anything on this issue because it is too slow; a simple command such as opening a folder takes 10 minutes! Has it damaged something by installing Windows 7? What can I do to make it normal again? Thanks in advance

    Looks like a bad HD for me. You need to check the bad sectors, which can be easily made to initialize with a linux LiveCD/USB and by running disk utility it. It will report on the SMART status of your drive, and I suspect that your HD to be riddled with bad sectors, ergo long boot time and BSOD.

  • After the last update on Wnidows 7 Firefox opens just a blank screen (black).

    After the last update Firefox on a machine Wnidows 7, Firefox opens just a blank screen (black). It worked fine until the latest update. It does not open in "safe" mode I tried several facilities clean and using various other compatibility settings. I also tried various changes of display. Closing X is still under the black forest as I can by conjecture activate this.

    Get a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.

    You can check if there is an update for your graphics display driver.

    Try to start Firefox in Safe Mode by holding down the shift/Options key.

    Disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

  • 10.11.5 el capitan / no login screen / black

    After installation, I can not connect to OS X because (speculation: the LoginWindow service does not start).

    • Screen black (but always on)
    • No "cursor in the corner.
    • Occasional spinner
    • Finally, turned more
    • Cannot start in safe mode
    • Reset the SMC
    • Reset the PRAM

    I can connect via ssh. From there, I can see via system.log that LoginWindow is continually start and stop and it seems to be an auth problem.

    16 May 11:59:54 doom SecurityAgent [1170]: AgentMechanism called [mechanism(builtin:policy-banner)]

    16 May 11:59:54 doom SecurityAgent [1170]: AgentMechanism [mechanism(builtin:policy-banner)] called setResult: 0

    16 May 11:59:54 doom SecurityAgent [1170]: {processRequestCreate} could not create the agent mechanism, failure of authentication.

    16 May 11:59:54 doom authd [137]: engine [1155]: error creating agent mechanism

    16 May 11:59:54 doom authd [137]: engine [1155]: assess 60008 returned back errAuthorizationInternal

    16 May 11:59:54 doom authd [137]: copy_rights: _server_authorize failed

    16 May 11:59:54 doom SecurityAgent [1170]: AgentMechanism [mechanism(builtin:policy-banner)] destroy called

    16 May 11:59:54 doom loginwindow [1155]: login window - return of the security officer

    16 May 11:59:54 doom ManagedClient [1169]: CFPasteboardRef CFPasteboardCreate (CFAllocatorRef, CFStringRef): failed to create aggregate data

    16 May 11:59:54 - last message repeated 3 times.

    16 May 11:59:54 doom loginwindow [1155]: ERROR | -[LoginApp continueAuthPluginRequestAfterFamilyControlsCheck] | AuthorizationRef is not a username. On the way out.

    16 May 11:59:54 doom loginwindow [1155]: exit via direct Application Login window: 0

    And the authd.log:

    16 May 10:48:07 doom authd [111]: managed allowing the right 'system.install.apple - config-data' customer '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [329] permission created by ' / System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [336] (4.0)

    16 May 10:48:07 doom authd [111]: Sandbox denied authorizing the right ' system.install.app - store - software.standard - user ' permission created by ' / System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [336]

    16 May 10:48:07 doom authd [111]: managed allowing the right 'system.install.apple - config-data' customer '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/sy stem_installd' [337] permission created by ' / System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [336] (4.0)

    16 May 10:48:07 doom authd [111]: Sandbox denied authorizing the right ' system.install.app - store - software.standard - user ' permission created by ' / System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [336]

    16 May 10:48:08 doom authd [111]: engine [333]: error creating agent mechanism

    16 May 10:48:08 doom authd [111]: engine [333]: assess 60008 returned back errAuthorizationInternal

    16 May 10:48:08 doom authd [111]: copy_rights: _server_authorize failed

    16 May 10:48:18 doom authd [111]: engine [351]: error creating agent mechanism

    16 May 10:48:18 doom authd [111]: engine [351]: assess 60008 returned back errAuthorizationInternal

    16 May 10:48:18 doom authd [111]: copy_rights: _server_authorize failed

    16 May 10:48:28 doom authd [111]: engine [373]: error creating agent mechanism

    16 May 10:48:28 doom authd [111]: engine [373]: assess 60008 returned back errAuthorizationInternal

    16 May 10:48:28 doom authd [111]: copy_rights: _server_authorize failed

    The last three statements are repeated each attempt to start to the top of the login window.

    A glance at:

    http://www.NetworkWorld.com/article/3012241/Macs/a-fix-for-the-OS-x-black-screen - of - doom.html

    suggests I should turn to 'use iCloud password' (which can be enabled), but I don't see how to do it from the CLI.

    If you do not already have a current backup, please backup all data, and then reinstall the OS. * you don't need to erase the boot volume, and you won't need the backup unless something is wrong. If the system has been upgraded an earlier version of Mac OS X, you may need to the Apple ID and password to use.

    There are ways to back up a computer that is not fully functional. Ask if you need advice.

    If you installed the runtime Java distributed by Apple, and still need, you will need to reinstall it. It goes the same for Xcode. All other data will be preserved.

    Related support article refers to OS X 10.11 ("El Capitan"), but the procedure is the same for OS X 10.7 ("Lion") and later versions.

  • iPad Pro 128 GB IOS 9.2 screen black

    All videos, youtube, bought videos, etc. are screen black but audio is OK. Is this a bug problem? I don't have not do a difficult start (button ups / home together for 10secs) but made a regular stop of reboot. Any ideas out there?

    Try the forced reboot. Press the sleep and home for 20-30 seconds. If you see a silver apple, let go and let it restart.

    If a restart will not bring him back, do what you can to save things and make an appointment at your local apple store to check out them.

  • EXPLORER WINDOWS STOPPED WORKING [NOW WHEN MY COMPUTER LOADED UP, ALL I SEE IS A SCREEN BLACK, NO ICON, NO MENU START, NOTHING] _

    I RECEIVED A MESSAGE "WINDOWS EXPLORER HAS STOPPED WORKING" [NOW WHEN MY COMPUTER LOAD UPWARD, ALL WHAT I SEE IS A SCREEN BLACK, NO ICON, NO MENU START, NO WALLPAPER, NOTHING].

    AFTER A REBOOT, I GOT A MESSAGE "PROJECT WINDOW HAS STOPPED WORKING. A PROBLEM CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. THE WINDOW CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE. "AFTER HAVING CLICKED ON THE MESSAGE HE OPENED THE WINDOW UPDATE,.

    I TRY THE WINDOW UPDATE, I THINK THAT THE UPDATE FOR WINDOWS VISTA SERVICE PACK 2, BUT HE HAS JUST SAY PREPARES TO INSTALL THE UPDATE AND RUNNING IT FOR HOURS, BUT NEVER INSTALL THE UPDATE.

    IT OF THE ONLY SOLUTION WINDOW SHOWEVED FOR ME, IS THERE ANY OTHER SOLUTION TO MY PROBLEM?

    Thank you

    OH I JUST ACCESSED INTERNET EXPLORER, CONTROL PANEL, MY COMPUTER WITH DELL DOCK FOLDER. DELL DOCK IS THE ONLY PROGRAM RUNNING. MY OFFICE IS STILL IS NOT RUNNING. MENU START, THE ICONS, THE WALL PAPER STILL DOES NOT WORK. I STILL HAVE BLACK SCREEN.
    I TRIED THE SYSTEM RESTORE, BUT IT FAILED. I HAVVE MY BLACK SCREEN PROBLEM.

    Andy1502_a,
    If you haven't tried the "last known good configuration" among the Advanced startup options then do that first.  If this does not help, you must run the System File Checker to search for possible system problems.  Then, you must run the upgrade from the system tool and then see if you are able to run the SP2 update.   Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • IBM ThinkPad Lenovo T60 (8744 5BU) sound driver problem

    Hello

    I have problems with my Lenovo T60, I ran all the updates and installed all the drivers that I am able to install, with the exception of 1 pilot that I can't find anywhere. It is the sound driver, I checked everywhere on the internet for days and still not able to find the right driver that works. I called the help line IBM Lenovo and all they can do is tell me the Web site to go because there is no guarantee that more than a dozen times already visited. If there is anyone here who has a Lenovo T60 (8744 5BU) laptop, please help me here, or if someone is able to help that would be great. Questions please ask, I can give more information. Thank you.

    You need more that just run the downloaded exe file.  Run this file (77a224ww.exe) just to extract the necessary files and puts them in a directory on your hard drive.  It does really settle anything.

    Did you read the Readme, particularly the "installation instructions"?  Have you noticed that you need to uninstall any previous drivers before installing the new?

    • Start the Device Manager (start > run > devmgmt.msc > OK)
    • Click on the + sign next to "audio, video and game controllers".
    • Is there an entry in Audio device to 'SoundMax Digital Integrated' Manager?
    • y at - it a caution icon beside the SoundMax element or any of the entries in "audio, video and game controllers"?
    • If there is a warning in the Device Manager, (a) what is the name of the device and (b) double click on the device and report, which is in 'State of the device' and 'use of the device.
    • What has happened just before that your sound has disappeared?
  • Diskette drive 0 seek failure screen black/continue F1, F2 Setup, CORRECTION steps

    Have followed the instructions for the BIOS, floppy drive disabled

    Has not solved the question-are there - it something else?

    That's what I discovered, trying to follow the instructions of several positions of countless times and several Tech IT these past two weeks.  This FIX is actually three steps; Two steps in blue SCREEN, the second of two parts missing in the instructions in the previous post Forum fixes:

    STEP 1. Select "F2" on your SCREEN black Error Message 'diskette drive 0 seek failure;

         Missing the 2nd step indicating where 'Floppy' must be DISABLED... is actually in two places.

    STEP 2.  Arrow down and SELCET «CMOS...» "near the top of the list - (the keyboard is not active) and on the next screen, arrow down and SELECT -" Floppy Drive-1, 44 is activated "MUST be EXCHANGE FOR: 'DISABLED' (the readers of floppy-1, 44 are obsolete) another menu screen will pop up, to make your selection, the arrow down to select"OFF"and the ECONOMY-F10.

    STEP 3  Submenu will return to the MAIN - BLUE SCREEN Menu, you need to arrow down and select BIOS; as stated in previous POSTS and need RESET BIOS to: #1 HD, CD/DVD #2; #3 unable to READ floppies; then select F10 to run, return to the main Menu of previous blue screen; "F10,"saves and exits" you in the main Menu of Blue SCREEN" toCOMPLETE FIX... Windows Start Up, immediately, translates the computer starts normally and returns to theWindows Logo and connection status. 

    • (See this correction, corrected an error in the boot order in the BIOS since the 'HD' has been 'DISABLED', floppy drive was 2nd "Enabled" and CD/DVD has been 1st disk "Enabled"; and CMOS had "activated" "Floppy drive-1, 44" that has generated this ERROR BLACK SCREEN and interrupt thenormal Windows process at startup computer n and connection. "")

    If all goes well, the MESSAGE is useful, easier, and more clear instructions to resolve for the next person with this problem and will be more quickly find and get back to business with a happy computer!

  • After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

    I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
    3-4 years.

    Although the system has never been quick to start, after the latest Microsoft
    update has been downloaded and installed, it now takes about half an hour to start
    the system of cold starts and 20 minutes from the sleep position.
    It also takes a long extra time to get the Explorer running

    What happened during the update may cause this extra on drag
    performance? How can I change?

    I tried the system restore, but it would allow me to go back only to the point
    When the MS Update has been installed.

    Thank you.

    HR Sirois

    Is your system error free?

    Event Viewer reports

    1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

    2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

    3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

    4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

    5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

    6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

    7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  • Screen black, but still clocked

    Hello, I have a problem. I'm using Windows 7 home edition. and that's the problem. This happens for 2 weeks, I was chatting with my friend, all of a sudden my screen went black, but my CPU still running. then I restart my computer, after the turn of the cpu on a couple of minutes later (5-15 minutes) the screen went black again. my anti virus do not show any threat, and after the black screen, I can't press CTR + ALT + DEL to Task Manager to get out. but then the still CPU running. Please help me

    Hello

    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    References to Vista also apply to Windows 7.

    No registration necessary data and re - install Windows 7 might be the best option, but here are a
    few others.

    You can save your files by putting the drive in another computer or an external hard drive enclosure, then
    saving them. Do this using several methods to redundantly. Of course, a real computer
    Shop or the manufacturer of your system can help to recover the files.

    Or you can use a boot Ubuntu CD to back up data.

    Use Ubuntu Live CD to backup files from your Windows computer dead
    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

    --------------------------------------------------------------

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
    -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
    then right click on the device and UNINSTALL - REBOOT.

    A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
    ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
    repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
    base. That there is no information on a black screen as there is just a blue screen
    adds to the difficulty. Often using a restore point or Startup Repair will have no effect.

    You can try a google to see the proposed repairs, whom some have worked however these
    cover a wide field of efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a window 7 disk? You can try restoring the system to it. If you do not have the
    discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
    it.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    You can create a recovery disc or someone else use same version (to do the system restore
    It only needs to be bootable).

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ------------------------------------------------

    These require good Windows 7 drives (especially if you can not start safe mode).

    Try the Startup Repair tool-

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    Try Repair Options recovery or a Windows 7 boot disk system

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    If nothing works, you can do a repair installation.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Windows 7 boot disk:
    (type in a single line or copy / paste a line at a time and then press enter - do not type)
    parenthesis or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • a thin horizontal line between lenovo n500 screen

    Hi guys I need an urgent response of lenovo guys.  When I was watching a movie about a month ago a thin appeared between lenovo n500 screen. I hooked up another monitor, and that was very good. This means that my lcd screen you have the problem. someone told me that an IC is damaged. Lenovo guys please tell me lenovo warranty covers this problem?

    Second, what is the cost of repair?

    warranty should cover this issue. Contact lenovo support line

  • To monitor screen black startup even when turned on.

    Hello, John Sherman,.

    Your question about the Microsoft community received a response from stephanie Podder.

    Response

    Hi John,.

    It has long been that you have filed your application. Are you still experiencing this problem?

    If so, let us know we will be happy to help you!

    For stephanie Podder: yes I always face this problem. I need help.

    Read this answer on Microsoft Community

    Hi John,.

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem can occur because of driver settings or registry corrupt display.

    I suggest you use the steps in this article and check if it helps.
    Reference:
    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    Important notes:
    Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

    When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Windows media center tuner works fine but won't display of television programs (screen black & no audio)

    Windows media center tuner works well, but won't display (screen black & no audio) of television programs.

    He has no problem display of a recorded program but will not display the digital direct terestrial TV program.

    The problem sometimes disappears and then returns, for example - this morning, after 30 minutes of game time!

    Hi Daniel,.

    Update your graphics card, but also the TV tuner card drivers. Uninstall and reinstall the graphics driver.  Once done, reconfigure Windows Media Center.

    Method 1: Try to update to the latest graphics card drivers on the manufacturer's Web site.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2: Uninstall and reinstall the driver for the graphics card from Device Manager:

    Open the Device Manager

    http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

    Visit the manufacturer's Web site to download and install the latest graphics driver. Once done reconfigures WMC.

    Method 3: See the article provided below and check if help.

    Set up a TV signal in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-cent

    Method 4: Uninstall and reinstall the Windows Media Center:

    Stage i: uninstall Windows Media Center:

    a. go to start and in the search type 'Turn Windows has or not'.
    b. click on "Turn Windows features on or off".
    c. find multimedia and uncheck the brand in the face of Windows Media Center.
    d. restart the computer

    Stage II: Reinstall the Windows Media Center:

    a. go to start and in the search type 'Turn Windows has or not'.
    b. click on "Turn Windows features on or off".
    c. find the multimedia functions and place a check mark in front of Windows Media Center.
    d. restart the computer.

    Let us know if you have other questions about Windows in the future.

Maybe you are looking for