Lenovo V470/V570 starting problems

I bought a laptop Lenovo V570 10j ag from Best Buy. It worked really good for 8 days, and then got stuck at the level of the cursor of the start screen rotation. I tried several methods to fix this withdrawal including it form power source, remove the battery, now the power button for 3 second intervals 10-1 30 second interval, antivirus in safe mode and system restore in safe mode. The only one that works is the system restore, safe mode. It will only allow me to login once after that I have perform a system restore, and then the same problem from happening again. I keep trying to get all the updates, but it always freezes during the installation of Internet Explorer 9 x 64. If anyone has ideas of how to do to solve this problem would be great.


Tags: Lenovo Notebooks

Similar Questions

  • Recovered / Reset to 8.0 USB but no start - problem UEFI?

    I did have problems starting from the recovery USB I did.  I used it as shown in line to start and do a full restore, which erased all files and took 90 minutes to completely redo the partition.  After the reboot, it starts at the USB again.  I shut down the computer and remove the USB key.  When you try to boot from the hard drive, it goes into the Start Menu.

    1. I can boot from USB no matter what UEFI mode I select, go to the command line and see all partitions using DISKPART
    2. I did all orders bootrec.exe recommended to correct, fix the mbr.
    3. I ran bootrec.exe /rebuildbcd with the appropriate settings.
    4. I can see all partitions, including the hidden factory default image (which I believe has been copied to the USB recovery.)
    5. I can access C: (started from USB X :) and the file system is there.
    6. I went to the BIOS: enabled Secure Boot, tried three of the UEFI/Legacy Boot options.
    7. I have not deleted the license keys in BIOS.
    8. I ran all the software utility tests available from menu start/applications.
    9. I have rerun the restore again without any error or change in the situation.
    10. I called Lenovo support and they require a software support contract.  (With 24 years of experience, I'm not quite ready to pay to be frustrated until I have try the forums).

    I have several other available systems, so I try to run Windows 8.1 Overview for a week or two.  I thought my recovery would be the simple step to get back to Windows 8.  I mention this last because I think that the format of the deleted partition 8.1 all system and I face with a BIOS issue that is what he thinks the start is an illegal operating system.  But I guess that I would get a message.

    UPDATE: according to me, this is a question of UEFI.  So that the USB repartition and reset the hard drive, I have to turn on Legacy support.  Otherwise, it indicates that the partition/disk is too small.  I come back and re - activate the UEFI mode in the BIOS, and it still does not boot to HD.

    Hi Paul,.

    We appreciate your efforts to resolve the issue.

    I suggest you contact the Lenovo support that the problem is with the BIOS that is present on the motherboard. You can see the following link for contact

    Lenovo support.

    http://support.Lenovo.com/en_US/

    For any other corresponding Windows help, do not hesitate to contact us and we will be helping.

  • Lenovo Ideapad U310 speaker problem

    Hi all

    My U310 of Lenovo Ideapad has had problems of speaker,

    The headphones work correctly, but the built-in speakers that are Awefully located inbetween as the hinge and the base of the screen do not work.

    I first thought it was a problem with the headphone jack that could have cut the circuit internal speaker because of the incorrect removal of the headphone jack, but it is not true because I've noticed that its a problem with the angle I keep tilt of the screen.

    On the passage of the screen at any angle above 90 or 100 degrees, the speakers cut in and are activated once its below 80 degrees.

    I'm a little worried about the words on it?

    Kind regards

    raisedadead.

    THANK YOU VERY MUCH IN ADVANCE!

    Thank you Alaa,

    The problem is now solved, mainly the mobile hinge was obstruction in fact the thread that connects the speakers, according to the service technician. Need to replace the wiring had been damaged by the hinge. A manufacturing problem small on the wire does not correctly connected to the hinge. Thank you

  • Satellite L - starting problem

    I used my new Toshiba laptop about 6 months ago - no prpblems. These last days I have starting problems. I turn it on and Toshiba logo appears on the screen, and Windows does not start. Toshiba Logo remains on as frozen screen and laptop keyboard does not respond. I turn it back on works and that's okay - wimdows starts normally. Startup Repair does not detect any problems.

    What can be?

    Hi oktay,.

    What model of laptop you have exactly? I can t find this information in your ad.

    If the laptop hangs on the Toshiba logo, it has nothing to do with Windows and it s hardware related issue.
    Have you connected external devices? If Yes, remove them all and try to boot up your laptop.

  • Starting problems. - RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll

    I get the message RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll. What should I do?

    I had starting problems, boot loop, I think it seems to have been resolved by using the last known good configuration, but I get this popup dialog box. I've not closed for fear that it will start XP looping again.

    Hi EddieBryan,

    1. did you of recent changes on the computer?

    2. do you have security software installed on the computer?

    3. when exactly you receive the error message?

    Method 1
    Check if the problem persists in safe mode and after return with the result.
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    Method 2
    If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
    I suggest that you configure the computer in a clean boot state and check if it helps.
    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
    See section to learn more about how to clean boot.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on Start , then click run.
    2. type msconfig , then click OK.
    The System Configuration Utility dialog box appears.
    3. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Method 3

    If the previous step fails then I suggest that scan you SFC on the computer that will search the corrupted system files and try to correct them.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    You are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker

    http://support.Microsoft.com/kb/900910

  • Win 7 intermittent starting problems

    My wife birhtday, I bought a new desktop PC 500-281 HP Pavillion through Win 7 clips in July of 2014. Intermittently the machine hangs at startup. Usually, he gets to "Starting Windows" screen and freezes, windows logo is not launched. When I shut off and restart, usually the screen asking if I want to start windows normally or start the Startup Repair utility. Should I choose one of these options and the machine works very well, sometimes I can shoose an option and the machine hangs again. Startup Repair shows no problem. When I'm on Windows I ran antivirus (AVG, McAfee, bitsMalware IO) analyses all upward with no problem. The machine is connected to ethernet (not wireless) a of the USB connections and: mouse, keyboard, external hard drive WD, printer Canon, Logitech webcam. All of this worked well on the old box. I have checked/updated all the drivers for external and all devices are updated. I checked the BIOS and Windows Connection Manager is the first start. This is a report of start-gel 60/40 at the moment and it happened that the staples of 14 days return policy. Any advice? My wife is extremely frustrated! (as a result so I am!)

    Hi Bob,

    I would test equipment (systems and components) to restarting your PC and pressing "ESC". A defective material is usually behind on a new PC erratic behavior. Despite a software driver problem which is very unlikely, component, causing this type of symptom can be the power supply. This point of failure (power) is not detected using HP diagnostics. If material tests pass and this isn't a software driver problem, through the process of elimination, it can be the power supply.

    In the start menu select F2 and run diagnostics.

    If all tests pass, try to use the PC with HP supplied only devices (mouse, keyboard, and Ethernet connection) to see if the system stabilizes.

    Let me know how it goes. We can try additional troubleshooting if the advice above does not help.

    Finally, you need to maybe to back up important data and do a factory restore. Then, run the system without installing any additional software and only HP devices connected.

    Always start problems? Now is the time to contact the HP Support.

    When our spouses are unhappy, we are miserable!

    Jaco

    I'm not an employee of ch *.

    "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

    HP products:
    810-150se office
    17 t - j000 Notebook
    H8 1380t CTO Desktop
    560z Desktop

  • V570 Lenovo does not start

    Hello. I'm here to grace you all with yet another question v570. It's really self-locking me this machine has so many problems. I have fixed just the matter of EgisTech, where the unit would get hung up and please wait. Now it won't even turn. Light, like the power button and the lights at the bottom left. But the screen does nothing. Also, I tried to connect the machine to a VGA cable is not the screen because nothing appeared when I did. The hard disk rotates. The fan runs. Lights are on, it seems to be the screen but, it's not. I am quite at loss for what could happen now. Please help me. I have important work to do.


  • I have a lenovo v570 starts up IM having trouble.

    I recently got a laptop for Christmas than a lenova 570 and last week or twice randomly in the beginning it freezes. It will say windows start and complete that, but when it will connect (connect to your profile) it says please wait and it freezes it.  Sometimes I can simply turn it works and it will be ok, but it takes sometimes 3 or 4 times to work. What he does? What is a way to solve this problem? Any help would be greatly appreciated.

    Thanks I think that my computer is now, but I'm not entirely positive because it only does it at random.  In my opinion, he could have the bioexcess (fingerprint reader), the cause of the problem. Thank you once again I'll let know you if it still works hard.

  • Z500 Lenovo does not start. Help, please!

    Hi guys! First time on the forum. I recently got my lenovo Z500 a few months ago and it's a great laptop. However at night last he simply stopped working. While I was just surfing the Internet Windows started does not. It got to the point where I had no choice but to turn it off. When I turned it back on it rest on the start screen, and nothing happens. When it starts the fan is silent and then in a bit of overdrive. My friend is of the opinion that it is a problem with windows 8, but unfortunately it won't even let me do a safe mode boot. F8 does not work and my only chance was to F12, but unfortunately, even if it brings the option of boot and I can select the screen goes black and stay like that. Thank you very much in advance for anyone who can provide any help!

    Malarkey_ wrote:
    My apologies if I'm a little in every sense. Unfortunately I am very amateur when comes to computers. How can I go about starting the recovery media in the USB port? Once again sorry if I melt your brain. I don't have a clue haha.

    In fact, you have several options:

    1. you can call Lenovo and request to do the repair if your camera is still under warranty.

    2. If you don't mind losing any of your data and custom programs, you can try to restore your system back to factory default by pressing the NOVO button (located next to the plug) while the unit is turned off. Select a recovery key and choose restore. You can read the details by downloading the user guide and go to page 23. Links: http://support.lenovo.com/en_US/detail.page?DocID=UM016744.

    3. USB recovery media initialize.

    4 etc.

  • Lenovo 3000 N200 wireless problem

    HY,

    I just installed windows xp sp3 on my Lenovo 3000 N200 laptop, I installed all the drivers and everything except wireless works.

    Wireless light does not illuminate when I move the button 'Activate', only the bluetooth light.

    I went to device maneger and saw that there is a 'mistake' in the network controller. I reinstalled the drivers for the wireless, but it still doesn't work.

    Help please.

    Hi all

    I just installed xp sp3 edition in my lenovo 3000 n200 and yes I had the same problem with the radio. I Googled it and found the correct dirver: driver Broadcom WIRELESS LAN, where you can find here http://consumersupport.lenovo.com/ot/en/driversdownloads/Drivers_Show_236.html.

    1 extract

    2. install

    When installing wireless led light started to Flash and it works perfectly.

    Sincerely,

    lukime

  • Y500 SSD Leno starting problems

    OK, so after trying a lot of different things, I can't seem to get this to work. What I'm trying to do, is to get my OS (windows 8) at the start of my ssd mSata (256 GB) and use the stock storage HARD drive. I want to use the SSD because I like the faster startup time and load times that accompany it.

    What I tried:

    (1) used a Windows 8 ISO on a usb key to install windows on the SSD drive, everything went well and the download is complete, but every time that I boot on the laptop, it gives me the ability to start from the volume 2 (OS on the SSD) or Volume7 (OS on the HARD disk) which really annoyed me (Im picky like that) so I formatted the HARD drive. This is where things are hairy. When my computer restarts have me an error trying to start up, essentially telling me that there is something on this HARD drive he had to be there, long story short, it made me factory reset my computer (the ssd remained the same since it was not outside the problem).

    (2) after #1 I thought, Fine BONES may remain on the HARD disk, it is large enough to hold my stuff and this OS. But I still wanted the option to not see that Volume 7 Option, so after a bit of searching on Google I found that you can actually remove the boot option so that this doent show there are 2 choices on initialize toward the top. Tried it, didn't work, got the same error as try #1.

    (3) I found a guide on these forums (http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Lenovo-y500-COMPLETE-mSata-SSD-Installation...) on how to do what I'm trying to do. I made sure that I installed it properly, made sure that I see in my bios, and he was using the UEFI, secure boot off, start prioty defined on the ssd. I have clone 4 partitions for the SSD with Macrium Reflect. Name SSD changes it's self for Windows 8 d: drive. He gets so my hopes upward this will work. IGO to start since the SSD and nothing happens, still boots the os from the HARD disk. So I say to myself, I'll just remove the drive HARD doing so he MUST start from the SDS. I remove the HARD drive and turn on the computer, gives me an error screen blue fat fat, says that my computer is missing an important element and that I should get my computer repaired.

    I don't know what to do. If I have to I will return to attempt #1 and just deal with the options Volume 2 and volume 7, but I'd really like to have rather 2nd OS gone so I can get my maximum storage out of it. Any help would be welcome. -Thank you

    Unfortunately, this has not worked for me. I did all your steps but when it asked me to restart my computer to complete the migration that has nothing happened. I tried twice with no success. However on the third attempt, I did something stupid on the accident. I ment to try to copy the OS on the SSD, but what I actually did was copy the empty SSD at the disk, formatting so the HARD drive completely. Initially I capotais, but then I realized that everything what was that hinder me before (these hidden partitions of lenovo) are now gone. So I just installed windows on the computer, manually installed drivers, and everything's fine and dandy.

    However, the only problem with that is I don't believe one key Recovery works more unless I can understand how to install it on the laptop.

    Thanks for your help, it worked very well in a unexpected way haha.

  • Updating the BIOS T540p to 2.21-> starting problems

    I've updated my BIOS til 2.21 on my T540p.

    After the witch upgrade was OK, I have problems starting.

    1 of 4 of the boot are not placed alongside og ok all connected HARD disk

    In the dock or external HDD (USB) connected then startup fails 100%

    When startup fails and stops with the Lenovo logo

    Help!

    Best regards Henrik

    Lenovo released 2.22 BIOS for the ThinkPad T540p. It includes several fixes for unexpected start-up problems.

    <2.22>

    UEFI: 2.22 / ECP: 1.13

    -(New) updated the CPU microcode.

    -(Fix) fixed an issue where BIOS update may fail after the illegal stop.

    -(Fix) fixed an issue where Computrace feature may not work.

    -(Fix) fixed a problem where the SRSETUP might not work with password.

    -(Fix) fixed an issue where supply USB key can be activated when AMT is disabled by the installation program.

    -(Fix) fixed a problem where the password prompt may appear when network boot.

    -(Fix) fixed an issue where plug USB keyboard may cause hang up with the CONFIGURATION of the BIOS menu entry.

    It can be downloaded here: http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-T-Series-laptops/ThinkPad-T54...

    Thank you

  • Y50 Lenovo does not start on first boot

    Hi, I noticed that my laptop does not start at the first power on. A press on the Start button, Lenovo image shows, but after a few seconds the power turn off. I need to press the power button and restart the laptop without problem.
    Anyone else having the same problem?

    Good news... It seems that the problem is solved with a restoration of the default bios...

  • Lenovo Y550 4186 battery problems

    I bought a lenovo ideapad y550, I beileve is no longer under warranty, but I started having battery problems. The battery says it is fully charged, but the battery does not last more then 3 minutes. The laptop is unusable without a close grip. I can also understand the exact model number. The processor is a P8700 but I can't understand why it does not work. As I enter the support area my S/N, and it says "enter a valid serial number.

    dead battery, contact lenovo support line and ask for replacement.

  • Lenovo H430 video card problem

    Hi all

    I searched a bit on the forum but not found an answer to the problem I encounter. Apologies if it was answered, and I just missed him...

    I have a H430 Office with an i3-2120. I recently bought a Quadro 600 to install in the box. When I install the video card and turn on the box, all I see is the start of Lenovo screen. Nothing happens, then I heard 2 beeps. Normally, I have that would be associated with the RAM, but the machine works well when I use the integrated graphics card.

    I use the original supply of 280 watt, but the Quadro uses only 40 watts max. Any ideas on what could be the problem?

    Thanks in advance!

    Hi, thanks for the help!

    I got the card to operate, although it took a bit of time. I tried to put my bios to the latest available on the Lenovo Web site. In the bios file, there is a program that is used to update the bios from Windows. If you use a 64-bit system, DO NOT try to use it!

    I ended up getting a Gigabyte card to use, found a legacy setting in the bios menu and was able to get everything works perfectly!

Maybe you are looking for

  • Satellite C850 stops after 30 min after upgrading CPU

    Hello I C850 Satellite from Toshiba with processor Intel Celeron 1000 m and I bought the CPU Intel i3 2350 m and works, but after 30 min stops. The cooling temperature is ok why I put t now what's the problem here. The BIOS is updated to the latest v

  • import media from photos

    For some reason I can't seem to import any kind of media directly from Photos. The Photo app shows on Final Cut, but I can't seem to open or access anything whatsoever. I tried to access my media with pictures open and closed, but not luck when I dra

  • "customize this folder" has stopped working

    Whenever I do a right click on a folder and customize for photos, it changes is no longer the folder view. If I change the display of "Détails" to "Large icons", using the menu bar, the view changes but it default return Details every time that I go

  • Images expanded when you drag on the canvas of folder

    Pasted below specs.  I upadted PS cc 2015 yesterday via the application of office and since the update when I drag pictures on the Web since windows Explorer, pictures are enlarged a lot... I owe their scale to 24%.  It's never happened before.In add

  • Help to change a clause

    Hi guys anyone would be able to help me to change a clause that I created recentlyI have two tables ESKOM_RELA_U_C and eskom_rela_tblESKOM_RELA_U_CE_MAIL                                                         ASSM_2_COM--(qui est le Amount_OF_ASSESS