Lenovo Vibe Z2 Pro stuck at splash screen

Hello

I have the Vibe Z2 Pro and have the version of LINE of 271. Today, I got the OTA update message and tried to install the S277 update. But I wasn't able to do. So I phone reset and now phone is not booting. It stucks at Lenovo screen logo and nothing happens. I did the factory also resent by presseing low volume + powere but no help.

Please help me to restore the phone. As in samsung phones, there are mode of odin. Is something like this for lenovo. ??

Earlier, I rooted my phone and installed TWRP recovery. Then S277 update I removed the roots and tried to install the udate, but it failed. Please help me.

Kind regards

Mandar

Hi guys,.

I have soved that problem using Qualcomm Flash image program loader (QIFL). Its pretty simple. I had the original ROM and follow-up instruction as per

http://www.androidbrick.com/ultimate-Qualcomm-Snapdragon-unbrick-guide-Snapdragons-are-unbrickable-q...

This guide is the base LINE for K920

I got my phone revives and then updated to the latest version of the LINE-S277. No problems atall.

Hope it helps you too.

Kind regards

Mandar

Tags: Lenovo Phones

Similar Questions

  • Cannot delete an email account with Lenovo Vibe Z2 Pro (K920)

    Hi all
    I have a Lenovo Vibe Z2 Pro (K920).
    But I can't remove an e-mail account, for example Hotmail.
    Can you help me?

    Hello

    Hope this helps

    http://forums.Lenovo.com/T5/K-S-and-vibe-series/how-to-delete-an-email-account-in-vibe-UI-2-0/m-p/17...

  • Lenovo Vibe Z2 Pro Does not start

    Hello

    My lenovo vibe z2 does not start. It was working well before go to bed last night, but when I woke up it was off and I am unable to turn it on. I tried to load it first in case the battery is down, but after 30 minutes of charge it still won't start. Does not blink in all cases. I tired to press volume top + power to try to reset hard.

    It's as if he died.

    What can I do?

    Hello

    Thank you for your response.
    I used the original charger. Nothing has worked. I couldn't even the screen.

    I sent for service, received back it in 10 business days.

    FIX: The motherboard has been replaced under warranty.

  • PRE down and now stuck at splash screen - HELP!

    I was working on a small project (5 min) a couple of soundtracks and was going from one to the other location and crashed BEFORE - now when I open the program to the top of the start screen is blurry and I can't choose anything except the 8.01 update and stuff - HELP - project in 4 hours!

    Eric

    Based on a test drive, it's what I think got into the mix. I'm not sure of all the twists and turns, but maybe you can help me fit things together better once you read what follows:

    1. your first Elements 8.0.1 project.prel crashed.

    2. you reopened the first Elements 8.0.1 since the desktop icon which targeted the Adobe Premiere Elements 8.0.exe which opens the Premiere Elements welcome screen (aka Splash Screen). The program is stuck on the Welcome screen. You say that you have completed the process using the task/process manager.

    3. you then went to Program Files/Adobe/Premiere Elements 8.0 and clicked on the file Adobe Premiere Elements.exe to open Premiere Elements. Using this .exe to open the first Elements allows to bypass the Welcome screen (less process involved in loading or opening). Until I tried this I thought not possible: you can open Premiere Elements 8.0.1 via Adobe Premiere Elements 8.0.exe and bring it to the Welcome screen and then click Adobe Premiere Elements.exe in the Program Files folder and the program to open completely. If you find yourself with two instances of open Premiere Elements.

    4. If you tell me that you still have the original Premiere Elements stuck on the Welcome screen, so I let myself believe that you did not really close it with Task Manager/processes.

    5. return to the Task Manager/processes and search for more than one instance of «Adobe Premiere él...» "in the process list. Complete the process for both.

    6. then create a shortcut on the desktop of Adobe first Elements.exe and use instead of the original desktop icon which targets Adobe Premiere Elements 8.0.exe which includes the opening Welcome screen.

    RTA

  • x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

    Hello

    recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.

    Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)

    Any help would be appreciated.

    Hello

    This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
    Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
    What is some external device connected to your Qosmio laptop?

    Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).

  • Stuck at splash screen!

    IM using a probook 4530 s. It worked fine a few hours ago, until now. It gets stuck to the screen... with nothing else than the "windows 7 Home premium' down... It usually takes about 10 seconds after that. The pointer still works and I can activate the caps lock. His work also normally in SafeMode... so what exactly should I do?

    Hello

    Start the computer in Mode without failure.  When it has loaded, on the Start Menu, click principally made programs, accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issuance and then proceed to the restoration.  When you're done, see if Windows will restart normally.

    Kind regards

    DP - K

  • 131SK yoga 900 stuck at splash screen "Lenovo."

    My Yoga was turned on, I was connected and the screen is locked. I left my office for a minute and when I got home, it's in the start screen "Lenovo" (white text on black background). I don't know if it auto-update or something, but now I can't seem to do anything. I tried different combinations of holding down the power button and pressing the button "Novo", but the only two things I can do is be able to completely off or show me this screen. He will not be far enough in the boot process to allow me to boot from my USB recovery. I got less than two weeks.

    Any ideas would be appreciated.

    Never mind. I returned to Best Buy and exchanged. Tech he said, Yes, "it's watered."

  • Tecra A9 stuck on splash screen

    Hello

    I'm new to your forum, and I hope to find help.

    I have a Toshiba Tecra A9 stuck on the boot screen after my intervention in the bios to boot from a USB key.

    _DETAILS: _
    At first, it turns more on the home screen with the symbol choice 5 (hard drive, USB, etc.).
    By clicking on a symbol and nothing is unresponsive I can't enter the bios.
    It is displayed at the top of the screen: In Touch With tomorrow TOSHIBA and five symbols.

    I unplugged the two small green battery on the motherboard for 10 minutes, but nothing has changed.
    That said, I do not know if I unplugged the battery well (y ' have it two?).
    It would also make a metal button on the motherboard battery?

    Thanks in advance for your help.

    Alain

    I don't have this model of laptop, but can you please tell me what happen when you use F12 at startup?
    Start menu is available?
    If so, can you choose HARD drive as a boot device?

    I do not understand why you can not enter the BIOS settings? Have you tried F2 at startup?

  • Pavilion dv6 - 6 c 10: cell phone stuck on splash screen

    As I reset my laptop and after resetting my phone stucks on the start screen.
    I'm trying to stop my laptop using the power button / stop but he also did not and also I remove the battery in order to close the laptop but after removing, it's still on.
    Please reply as soon.

    Hi @ramnikchawla,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-6c10us Entertainment Notebook and problems with the laptop being stuck on the startup screen. Try to make a hard reset.

    When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

    Here is a link to computer does not start for Windows.

    Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • Stuck on splash screen

    Before that my computer has picked up in the start menu, it was crashing constantly. I would get a blue screen with different error messages. Now, my computer stopped working all together. It is stuck in Start menu and unresponsive. I can't start in safe mode. All I see on the screen is the gateway logo and startup options.

    This all happened more than a day. Before that, it worked fine. I installed a new graphics about a month or two if it is relevant.
    I am running Vista.
    Thanks for any help.

    Hi EyeSayUhh,

    I try to restore your computer from WinRE, which might help you resolve the issue.

    1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
    2. Press any key when the message "Press any key to boot from CD or DVD".
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. click on repair your computer.
    5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
    6. in the System Recovery Options dialog box, click System Restore.
    7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
    8. click Finish to restore the system.

    Check whether the problem is resolved.

    If this does not work, let us go ahead and run the Startup Repair tool and see if the problem is resolved.

    Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

    Follow the instructions in the link below to perform the Startup Repair.

    Startup Repair: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    You can try to disconnect all external devices on the machine, and then start the computer.
    Sometimes, an external hardware can also cause the issue during the startup process.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • My music not opening – stuck on splash screen

    Tonight, I tried to play music on my iPhone.  I clicked on the application of the 'music' and I got the screen of 'My music' (see below).

    There is no other options and I couldn't click on anything - so finally I let fall.

    I tried to close the application and also a 'hard reset' - but no joy.

    I went to my other iPhone and I opened my music on one where I got a few options below the photo that allowed me to play the music of my albums and playlists.

    iPhone 6 / iOS 9.2

    All advice welcome

    See you soon

    RB

    Sorted.

    I tried an another "hard reset".

    Got the options at the bottom of the screen - "Three month trial" etc.

    Can now play my music!

    RB

  • Satellite C50D - Stuck on splash screen "Toshiba leading innovation.

    Hey I have a new laptop of Toshiba C50D-A satellite.

    When I start it it won t go Toshiba leading innovation > screen. I can access the start screen by pressing F12 and accesses the Setup utility by pressing f2.
    Someone has ideas of how to do to solve this problem? Or what's wrong with it

    Hello

    On this virtual path, it is not easy to say what the problem is here.
    Can enter you recover or repair options - http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm?
    If so try please use some repair options.

  • 15 - ac137ne: Windows stuck on splash screen

    Hi on my Hp laptop, I rebooted it and connected. Initially, he was stuck on "Preparing Windows" for about 15 Minutes, but after that he's been stuck on "A moment" for a very long time now. Can you please tell me what I have to do to fix this and start using my laptop normally again?

    Try to do a system restore - choose a date before the problem started... Running Windows 8 & 10:

    http://support.HP.com/us-en/product/HP-15-AC100-notebook-PC-series/8499326/model/8903485/document/c03327545#AbT5

    If no joy_next try a Reset to repair your Windows installation:

    http://support.HP.com/us-en/product/HP-15-AC100-notebook-PC-series/8499326/model/8903485/document/c04742289#AbT1

  • Acer Aspire switch 10 - stuck at splash screen (Acer logo)

    Hello. My Aspire Switch won't start. It always hangs at the initial home screen with the Acer logo and the circle of rotation. Circle continues to run forever (I have a switch to turn it off). It worked fine for about a month, but one day I had this problem. I tried to start it without dock and SD card, but it did not help. Does anyone know what I can try to do?

    My version is SW5-012-11 K 1 NT. L72ER.004 (64 GB, model FHD), bios 1.06.

    I just my Tablet repair service. They replaced the whole motherboard.

    The topic can be closed.

  • Z2 stuck at splash screen

    So my Z2 has lack of battery last night and this morning, regardless of how much he is charged it gets stuck at the telstra logo when starting?

    To turn the unit back off, the only is to hold the power and volume buttons to the top.

    I have not flashed or modded the phone somehow.

    Any help would be appreciated.

    Hi patchyy,

    Welcome to the community,

    This sounds like the operating system is corrupted and will not allow access. To be honest, in this case I can advise only really do a repair of software. Use the link below to follow the instructions.

    Software repair

    You could also see if you can boot to safe mode. Follow the instructions here for a starting safe mode instructions

    Safe mode

Maybe you are looking for