Lenovo W510 flicker/blur when it's on battery (with nvidia Quadro FX880M)

Similar Questions

• Tecra M9: When a driver WHQL XP for NVidia Quadro NVS 130 M will be available

  Hello

  I am trying to downgrade a Tecra M9 from Vista to Windows XP and I want to know when a driver WHQL for NVidia Quadro NVS 130 M will be released because the latest version from the support CD is a beta version and is not WHQL.

  Thank you very much

  But - this important if the driver passed whql? In my opinion NO, because this thing whql is a pure invention of microsoft. If I were you I would install that drivers matter so certified or not and if you really have problems, then you can always give some feedback.

  By the way: where sought pilots?

  Welcome them

• UHD Lenovo y50 screen blurred when on a 1080 p resolution

  Hello world

  I recently bought a Lenovo Y50 UHD. The UHD resolution is good, but some programs appear too small.

  I change the resolution of 1920 x 1080, but she seems to have a blur on the screen.

  I have a Lenovo Y50 touch with a 1080 p screen and when I compare the two TI is not the same quality.

  Text look a little blurry, etc. Screen spend usually blurred.

  Is there something I can do to fix this?

  Thank you

  N ° if reduce you the resolution, several pixels will be used to represent a single one, which will cause the blur effect, which means that you need to run everything in UHD.

• Equium M50-164 crashes when I put the battery

  I have an Equium M50-164.

  I got it over a year now without any problems. I turned on this morning and it crashed (just a white, black screen) even when I tried to open it in safe mode. I have taken out the battery, but left the power cord in and it worked fine, without any problems at all, but when I put the battery with the power cable it crashed again. When you try to start it with just the battery, he would not do anything no lights, no boot at all?

  Help, please.

  Hello

  Does not sound good
  Only the battery is dead and or malfunction of the electronic power supply on the motherboard.
  The two cases are possible.
  Generally, the common user is not able to fix something like this.

  Of course, we can run here on the malfunction but I n t think this will help you.
  In my opinion, the laptop must be verified and some diagnostic tests must be started

  Contact the ASP in your country and explain the guys the situation

• My photos - just uploaded to iCloud photo library - are blurred when I open them on my iMac.  Why?  How to fix?

  My photos - just uploaded to iCloud photo library - are blurred when I open in iCloud photo library on my iMac.  I expect but they never sharpened.  Why?  How to fix?  I was not able to determine our a way to fix this despite research for hours on the forums.  For any help or suggestion will be useful, I'm sure!

  Using iMac 21.5 in. (end of 2009), processor Intel Core 2 Duo 3.06 GHz, 4 GB memory DDR3 1067 MHz

  El Capitan 10.11.4 running

  You have the iCloud library enabled and the option to optimize the photos in your local photo library?

  

  If so you probably watch optimized versions that will be much smaller a not very strong.

  

• Lenovo W510 processor upgrade

  Hi all

  I have a performance issue with my lenovo W510 i7 and so thought to upgrade the processor. CurrentY there a processor Intel Core i7 Q720 and my intention is to upgrade to an Intel Core i7 processor 4790 (BX80646I74790). I don't know any compatibility problem?

  Welcome to the forum!

  I was of the view your W510 will be sole-support model generation 1 Intel Core i7. Which means that you could go to one of these CPU:

  • Intel Core i7-820QM, 1.73 GHz to 3.06 GHz, 8 MB
  
  
  • Intel Core i7-920XM, 2.0 GHz to 3.2 GHz, 8 MB

• Great Photos in Lightroom 6 are blurred when exported to Facebook

  Ok. So I am new to using the Mac OS and Lightroom 6. I get a kick out of editing my photos and they come out well. However, when I export my photos in a folder of the Office they come out blurry. When I'm in Lightroom, I can zoom in on certain aspects and they are clear, but when I export, they are very blurred when I Zoom. What happens on Facebook also. I always select high quality when you import into Facebook. Can someone give me a very basic step by step on how to set up my options for export with Lightroom 6 on Mac OS.

  Try the quality of 90 and a size larger than 640 pixels.

  Your original is 5600 x 2800 pixels and is 100% quality.  You export to 640 x 320 pixels and 50% quality.  What did you expect to happen with these settings?

  I should probably add that if you are a committed photographer and the export of small and low quality of the evidence if the client cannot simply upload photos of good quality and not pay you for them, then ok, but then why do you ask why they are blurred, if they are supposed to be pretty fuzzy to be useless to the client.

• I got a lot of creative cloud including Lightroom. I think buying a Lenovo Ideapad for treatment when traveling. It is a 32-bit system of Windows 10. I'll be able to get an older version of Lightroom on my package? for example, 5

  I got a lot of creative cloud including Lightroom. I think buying a Lenovo Ideapad for treatment when traveling. It is a 32-bit system of Windows 10. I'll be able to get an older version of Lightroom on my package? for example, 5

  Hi colh.

  With a staff of creative cloud you will not be able to install Lightroom 6/CC on this computer, because it is not compatible on 32-bit systems. See the system requirements for Photoshop Lightroom for Mac OS and Windows

  However, you can install Lightroom Creative Cloud Desktop App.Refer 5 How to find and install previous Version of Adobe Apps in CC-2015 | Adobe Customer Care Team

  We recommend that you search for other laptops of 64-bit.

  Kind regards

  Assani

• Background blur when you change view States

  Hello
  I'm a newbie to Flex and pretty ropey to actionscript too after spending her last forever, Director of works. In any case, I was asked to evaluate Flex and I just upward with a simple case study application. So far, there has been some headaches, but I think I'm getting there. One thing I would like to know is how to blur the background, I'm sure I've seen this done on some sites, but can't quite see how to do it. So far, I have a component of the fabric along the top of the scene with three buttons in there. I have created 3 new States in each of them and display, I changed the height of the canvas element. I added a transition that animates the change of height of the canvas when switching between views. What I want, it's everything under this canvas to blur when it is not in the initial state, if it makes no sense.
  
  Thanks for your suggestions.
  
  Rob.

  AHA, sorted. Just had to get my head around the "targets" feature in the definition of the effects of transitions. Just need to best layout my design to simplify the targeting.

• Please replace the battery with the correct lenovo battery

  I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system

  buy a real battery. Press ESC to continue but the battery won't charge)

  I don't want to buy a new battery to another.

  I understand that this can be changed in the bios but don't know how.

  Now my battery is dead, and I'm unable to recharge it again.

  Ideas please

  
  

• When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  Try switching your Notes on / off under settings > iCloud or maybe restart the device-restart your iPhone, iPad or iPod touch - Apple Support to see if this could solve the problem.

• MacBook Pro has started to randomly stop when it is on battery since the upgrade to El Capitan

  I have a MacBook Pro (15 inch, early 2011) which works very well on the Mountain Lion for a long time. I finally got round to upgrading to El Capitan last week: directly to 10.11.6. A few days later he just powered down without warning while I was working. He was so very well for a few days, but then made several times in the last 48 hours.

  I am moderately sure it happens only when it is on battery (it did not in the past hours 8 while that plugged). Whenever it happens, that there is no warning and the Mac then fine restarts (manually) - Although the clock resets always in 1970 until he can contact an NTP server. One of the curious side effects is that my PostScript fonts were blank on the screen in Excel for a few reboots yesterday but then OK once again!

  No hardware has changed. Major software change is only El Capitan and possibly an iStat Menus update.

  I have reset PRAM and SMC. I ran the short AHT. I disassembled the machine and clean the fans. they were OK, but the problem seems to occur when the Mac is hot.

  Spotlight and Time Machine sometimes seemed to be struggling for the upgrade, and I also saw rpcsvchost with 100% of a core for a while. The machine feels sometimes slow - but for the last 8 hours, it was very good. The only model that I put in place, is that it seems to occur only on battery; It's even happened then that the Dock (etc.) were loading after logging in after an unexpected shutdown.

  The other thing common is in the newspapers every time:

  Cause of previous stop:-128

  I scanned a number of related posts to aspects of it, but do not look at who blames El Capitan rather than material. Yet, many people reported this kind of problem after the upgrade... Coincidence?

  Any ideas?

  Thank you.

  Cause of previous stop:-128

  A negative stop code generally indicates a hardware failure. Have the Apple to assess your Mac. The fix may be as simple as a spare battery.

  Start here: contact support

• I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  Maybe it is locked, Apple do not unlock phones, then call O2.

• When I change the battery on a power outlet, Firefox is empty, I close firefox, the "do you want to close" box is empty, too.

  I can't change current alternative to battery without incident. When I change the battery on a power outlet, Firefox blinks several times then turns off. To close the browser, I click on the 'X', which fortunately remains, and that the box "you want to close" is empty also. I hit enter and Firefox closes. I reopen and select restore previous... and I can continue. Just something I've ever known, do not know how to fix it. Sometimes, if I reduce the browser (""-"") at the top right before plugging in my diet, I can work around this problem. Sometimes he waits until I have maximize the browser, and again, it flashes and turns off anyway.

  Hello numberonejason, this is perhaps a problem with hardware acceleration. try updating your graphic driver, or in the case where this does not resolve the problem, disable hardware acceleration in firefox > options > advanced > General.

• Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  I changed the subject: config to make the rotation gesture to move between tabs and it worked great for well over a year. It now behaves properly, as described here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=877598

  It used to be very controllable move a tab on, now it is erratic and moves quickly and the unexpected tabs regardless of the slowness, I do the gesture of rotation. It's the main reason I use Firefox on Chrome and I will continue to do so unless there is no solution for this.

  Just put the browser.gesture.twist.threshold to something around 15-25.