Lenovo Y game surround sound no Sound Headset no sound on the right side

I am aware there is another topic on this issue, but there has been no response and I wanted necro post the other so the question is as follows:

When I test the sound, it is only on the left, and if I try the headphone jack instead of usb, sounds of the right ear out severely distorted... left ear, which means there is (still) no sound comes out of the right. Any help with this?

-Very well, so I tried it on multiple devices (some phones with this Jack and the PC of a friend works their headset with usb) and the problem persists, so I guess I'm going to open a new ticket, you tank for your answer martin.

Tags: Lenovo Products

Similar Questions

  • No sound from the right speaker / can not configure the speakers

    Hi all

    I have a new computer Sony laptop and just tried plugging in my speakers 2.1 computer inside.  Sound only comes out of the left satellite and a subwoofer.  When I try to set them up in the sound control panel, the installation of the single speaker on the speaker Assistant is stereo and only the first test tone (left) plays from the satellite on the left, then silence (no dial tone test on the right).

    Everything works fine on the built-in Laptop speakers, but they are for computer speakers, so I wish I could use my old speakers when I'm at my desk.

    Sony Vaio and Windows Update Update did not recommend all new drivers for the audio controller.  I downloaded and installed the latest driver on the site from Realtek but that didn't work at all so I rolled it back to the version provided with the system.

    Work fine with my laptop speakers older and my cell phone, so the fault is not with the right satellite is.

    Thank you
    Drew

    Hi Drew,

    Thanks for posting your query in the Microsoft Community. There is no sound from the right speaker in accordance with the description of the problem.

    ·         Did you do changes on the laptop before the show?

    I suggest you follow the steps in the article.

    Tips for solving common audio problems

    You can see these articles for more information:

    Sound cards: frequently asked questions

    No sound in Windows

    I hope this helps. Let us know if you need more assistance.

  • After 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear

    Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you

    It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.

    If you hear only on one side, who will tell you that is the question.

    If you hear from both sides, you must obtain a new helmet

    Software will fix either of the foregoing...

  • When I go full screen for a game or a video using Firefox 'fullscreen' moves to the left, leaving a white space on the right side of my screen, but the mouse still acts like the picture is where it should be, why?

    I have Firefix was last updated, and I use Windows 7 Home Premium. It's annoying, especially for games because I have to make sure that the slider is to the right (to a certain amount) of the question, I would click. This is in Firefox, I tried in Internet Explorer * shudder * and there is no problem, I do not have currently installed web browsers.

    Managing the Flash plugin

    Check and tell if its working.

  • Problem out 5.1 Surround sound via the TV to a Home Theater (Override sound formats supported?)

    Hi, I'm trying out a sound 5.1 on my Home Theater system via my TV via a digital output optical. So the video card (Asus EAH5450) is capable of up to 7.1 output, is connected via HDMI to my TV (a LG 47LH5000) which then returns sound via an optical digital output to my Home Theater 5.1 system (a LG HB965TZ). I have an Xbox 360 connected via HDMI to the TV and sound 5.1 is delivered perfectly to the correct speakers.

    The problem, in my view, is that the computer detects that it is connected to the TV that tells the PC there 2 speakers, so the sound of Windows 7 configuration menu displays just stereo and dolby digital.

    Is it possible to substitute the detection automatic that the supported formats and force the card to output 5.1 sound as I know, he is capable of?

    Thank you
    Martin

    Hello

    Try to follow the instructions to apply the sound card settings and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  • When you play games like Cityville, Farmville etc. Never, I get the full screen. The bottom and the right side are cut off

    When I opened these games, parts of the game screen is not displayed. If I click to full screen in Farmville, it shows in Cityville I can't click to full screen but the part of the screen is missing. If I open these games in Internet Explorer. the entire screen appears.

    I also have this problem, the bottom of Cityville fell after some actions, mainly requesting assistance on an object that must be 'charged '. The regular calls that go straight to the facebook wall don't do that. In any case, after experimentation, I found an easy solution that works every time. I have click on the free gifts tab and send the box stuff, NRG, allowed, just some, and it resets the problem without having to close the tab in Firefox.

  • Not Surround sound more on Blu - ray player after upgrade by MediaSmart

    When I used the Blu - ray player in my home theater, I selected the mode "HDMI pass" to get a sound surround. I came across a few new films that would not play and after the update from HP, the player would simply freeze as soon as there is audio present. I had to go to the Task Manager to close it.

    MediaSmart works fine on the laptop, but it only freezes when I use the parameter "pass through HDMI.

    I tried mode "HDMI pcm" and who does not work either. This Denon receiver there are five channels work but I get stereo sound on front speakers left and right. This seems to indicate that the Blu - ray player is not released in 5.1 surround sound and the laptop and the Denon receiver works fine.

    Supports the HP solution was to reinstall the older driver or try a system restore. I know that a system restore won't do anything. The problem is in the new software. The new software does not work on my HDX18 when he was under Vista, it did not work when I upgraded to Windows 7 and it does not work on my new dv8.

    I tried to contact CyberLink to let them know that the upgrade is giving problems, but I think they ignore me.

    Personally, I think that HP or Cyberlink just forgot to add the drivers for a 5.1 and 7.1 surround sound.

    If anyone find a solution to this one that I wouldn't be surprised. I'm quite sure I've covered all the possibilities, but you never know.

    Any help would be appreciated.

    Thank you

    HP had me download a software called K-Lite which is a software codec repairs and replacement. After the upgrade of the software more returned to get my blu - ray movies to work, I ran K-Lite and that did the trick.

    http://www.codecguide.com/download_kl.htm

    I used the mega version, but you can probably use the standard.

    It is a software complex with many choices and I changed it to accept a sound audio surround and DTS 7.1. There were several boxes prompting me to remove the broken codec which continued for some time and when it was all thanks to I was surprised that it worked.

    Meanwhile CyberLink itself actually got back to me and I was given some temporary free software provide I run their diagnostic tool for them on my dv8 for helping them understand my problem. It is still pending.

  • How can I get the audio 5.1 surround sound in Encore?

    Trying to get my mix 5.1 surround sound of the first CC in again to create a Blu - Ray and DVD. Exported AAC file first. Imported into yet. When I look at quality Presets in still, the audio tab shows the audio settings of basic as Dolby Digital Stereo with no option to change in 5.1. I built the project anyway and played on a Blu - Ray player and heard only the left and right audio channels.

    You must make the first 5.1 file and export it as an ac3 track. If you are CC 2015 exports Dolby Digital required using dvd Mpeg2 or H264dvd presets. Import ac3 into yet, is not re-transcoded.

  • No sound on right side

    I checked & it has the latest drivers... Any new system. It is a sound card from realtek high definition... That's exactly what happened. The two speakers worked well... I plugged my headset on the right speaker. No sound came through the right side of the helmet. I unplugged the headset & speaker system right has been dead since... Check the speaker system & card its saying that everything works correctly of course... but this isn't... only works on the left side. The speakers are plugged into the color green to green ports port & port rose to rose. Your information has been helpful, but wouldn't solve the problem. Thank you for your time...

    I talked to my computer man and he knew exactly what she was... Perhaps, it is not in the books of tech but should be. When I plugged the headphones he shorted the plug. All I had to do was open the enclosure & pull the plug for headphones.
    It worked like a charm & speakers great work... Thank you for your time... Stephenzon-problem solved

  • No sound after the takeover by Satellite C50 - from standby or sleep

    I had downgraded the C50 Toshiba Windows 8 for Windows 7 64-bit and downloaded all the drivers linked from Toshiba's web site, but there is no sound on the phone, after that I have to put the computer on standby or into hibernation. The sound on the right corner icon is present and active.

    I already uninstalled the audio driver in the Device Manager and rebooted the computer.
    This work of t n.
    Also I tried to install a new version of the audio driver Toshiba s website again, once again, no noise.

    If I do a full stop down or restart the laptop the sound is back to normal. Sometimes it is not as well...

    I didn't start-> Run-> enter services.msc. Check the status of the Windows Audio service is started.
    but once again, NO HELP.

    All windows updates are up to date. 7(64bit) is: Windows Ultimate SP1

    I have all the virus scan of the computer, he found nothing.

    I rang Toshiba customer support, they ask for 45 pounds (GBP) to pay for technical assistance.
    It is the stupid things that technical support is payable even though this computer is only 3 weeks.

    Can someone help me then?

    Hello

    What audio device is set as default in Control Panel-> sound-> tab reading after that the system wakes up from mode sleep?

    Check if the speakers are set by default.

    But to be honest, I think that the reading already tab settings are set correctly.

    In my opinion, you must reinstall the entire system once maybe that something was wrong during the first installation, who knows that everything is possible.

    After the new Win 7 installation ensure that the ITD and Toshiba Audio Enhancement Utility and DTS Studio sound driver are installed correctly.

  • Satellite L750 - no sound on the speaker or headphones - static

    Hello

    I have problems with the sound in my laptop for a few months. At first I thought that he would go away with updated drivers, which makes certain the alternatives system restore or changing audio device drivers high definition of Win 7, but I can't find a solution to this problem and today is getting worse. Right now, I can't have any kind of noise from the side if headphones or external speakers. Also, my sound disappears after 15-30 seconds of activity through the laptop speakers. I checked the forums and blogs on this issue, but still do not find a good solution for me.

    My model is:

    * Satellite L750-1VW *.
    * Code: PSK1WE-0U500ECE *.

    I checked on other systems, headphones and external speakers. So my guess is the Jack is the problem or I don't know. Yesterday, I remember getting a download of update of windows and then, from there my sound started getting static electricity to the right of the speakers and headphones.

    * First problem *: no sound after 15-30 seconds to be active while watching videos (vlc, wma, youtube, etc.)
    * Second problem * (recent): static, crackling noise, the right side of external speakers or headphones

    Any solution to this?

    I bought this laptop last year around may or April, can't remember the exact month. Thank you.

    Sorry my bad English.

    In my opinion, your options are very limited and all that you have done so far is good. You can check the settings of the software, test it with the factory settings or use the PC diagnostic tool preinstalled.
    Have you used this tool? He will check the sound of the waves on both speakers. If this is not the case, do.

    Anyway, I don't want to speculate, but somehow I think that there is hardware problem and I think that contact you the nearest Toshiba authorized service provider and ask for help. They use special software for the material testing and can say with certainty what the problem is.
    Warranty is still valid?

  • No sound from the speaker to the right computer - Satellite A60-124

    Since 2 weeks I have not more of her in the right computer speaker (Satellite A60-124 (the left one works very well fortunately))
    What can I do?

    Thank you

    [Edited by: admin on 21 January 06 20:50]

    Hello

    It sounds like the right speaker is broken.
    Did you check if the headphones work correctly?
    Please check. If the headphones work properly, so I guess that the speaker has a failure. In this case, you must contact the service for a replacement.

    By the way: Please check the Speaker Volume option in the sound and Audio devices.

    Good bye

  • Equium A60: No sound on the unit

    I recently bought a toshiba laptop from a family friend, unfortunately I can't get any sound what work so that ever, check audio devices, that seems not recognize all its material, so I guess I have to download the driver.

    I looked on the site for this, I can't seem to find it anywhere. Alls that I know the model Toshiba Equium A60, cannot find anything else as Exxx or anything like that.

    Anyone able to help. Know were I'll be able to get the correct driver.

    Thank you

    Hello

    Have you checked the State of the sound card in Device Manager? Please check first and see if the sound card is that there are enumerated and installed correctly. If so, check the button for the volume control on the right side and also all sound properties.

  • No sound on the PC after installing Netflix

    I noticed that the "speaker" icon had disappeared from the right side of my taskbar on the bottom. Then, when I tried to watch Netflix on my computer I realized that there is no noise. Also no sound when you access other functions of the computer – Word, Excel, YouTube, etc. Make a difference in the category of 'Sounds' in the Panel does not change. I unplugged the cable HDMI PC nothing works. He ran the difficulty - no attachments. No problems found. Aaah! Can anyone help?

    Too bad. Figured it out. IDT note icon now was the icon of audio, and once I have reset all default correctly and restarted the computer, it worked perfectly. Thanks, happy! You're awesome.

  • Active microphone but do not pick up sound on the Samsung QX411-W02UB (Windows 7 Home Premium 64-bit)

    Hello

    I just bought a laptop Samsung QX411-W02UB refurbished with Windows 7 Home Premium 64-bit, and everything was going a lot until I've decided to try Skype and noticed that the microphone did not work. I'm starting to think that maybe since it is a used laptop, the microphone can just be pulled.
    I downloaded the RealTek HD Audio Driver, enabled in his preferences and set the volume and levels of boost to their maximum values (100% and + 36.0dB, respectively). I have all disabled devices shown, the only other being "Stereo Mix - RealTek High Definition Audio - Ready." I tested the microphone with this second 'device' on and off, inside and outside of Skype.
    Here's what he did:
    The bar on the right side of the active microphone (microphone - Realtek High Definition Audio - Default Device) has a few green flickering bars as if the microphone works for about 1 to 7 seconds, but then everything stops. I spoke directly to the microphone and nothing happens. When I do a test call on Skype with Echo/Sound Test Services, I hear no reading of my voice.
    I made an audio recording of troubleshooting, and it detects no problem (I've seen all the details and they all say "not present delivers". I've also updated everything need be updated (restarts and all).
    So it's pretty much my problem. I wouldn't want to return a laptop because the built-in microphone did not work. I hope I described it well enough. I worked on it for about 6 hours now so my brain becomes blurred and tired at all.
    Is there possible solutions to this problem or it looks like I'll have to use an external mic?
    Thank you in advance!

    Hi, thanks for the response.

    I tried to do what you suggested, without success.
    After I posted this, I discovered in fact two other problems with hardware, so it looks like I'll return it.
    Thanks again! I appreciate it.

Maybe you are looking for