Lenovo y50-70 WiFi reconnect all the time

Similar Questions

• Satellite C55-A-1HN loses its Wi - Fi connection all the time

  Hello

  I hope someone can help me because this problem starts to become very frustrating!

  Laptop loses the wifi connection all the time, where as other devices (Ipad, mobile phones, other portable) all have a strong Wifi connection. My network adapter is Atheros AR956x, I tried to date but does not seem to make a difference, unckecking I tried the properties box that says off adapter to save energy, I thought that had fixed, but unfortunately still the same problem.

  Thank you

  Paul

  Hi Paul

  Is there a difference when using the laptop with the battery or the power supply?

• Satellite Pro 4600: Win2k with SP4 - cooler run all the time

  Hello

  last week, I bought a used Toshiba Satellite Pro 4600 PIII, 1 GHz, 512 GB of Ram, WIFI and DVD burner. Great machine so far.

  After that I changed the FAT32 file system to NTFS and reinstalled Win2K/SP4 cooler runs all the time.

  TaskManager says that "THOT_KEY.exe" uses up 99% of the CPU power. Disabling this service reduces the power of the processor and the cooler was quite, BUT didn't really helped - lots of keys does not work.

  I ran a few utilities to disinfect as Kaspersky, NOD32 etc. to ensure that Ia´ve not taken some malware.
  Should I try a bios update or change some settings?

  Any ideas?

  Thanks for help

  Hello

  AFAIK the THOT_KEY.exe belongs to the Toshiba Hotkey utility that controls the various key functions.
  If you disable this service, you will not be able to use the FN keys more.
  I m not 100% sure why this service uses 99% of CPU performance, but perhaps that it s not completely compatible with the W2K service packs. Where did you download this utility? I found it on the page of Toshiba Europe!

  In my opinion, you should try to reinstall the system again. This is probably the key!

  Good luck

• Satellite A300D - Turn off all the time

  My wife has a Satellite A300D (model PSAK4E) and it keeps closing. The two randomy and when induced under certain conditions

  Previously, I tested the HARD drive and found bad sectors then replaced with a 64 GB SSD. I tried to install Windows 7 but it kept fault towards the end. So I reset the machine without a battery and now the power button for 2 minutes to clear the memory. Installed Windows 7 + updates.

  I was worried about stopping all the time but flashed the BIOS. Flash worked.

  Laptop resets always? I have reviewed several possible causes and wanted to get other peoples ideas
  1 HARD drive - replaced and even resets
  2. battery - ran on power sector only and even resets
  3 overheating - sometimes under certain conditions (memmory tests or you try to run certain applications) or randomly (without reason)
  4. a broken circuit somewhere on the motherboard
  5 - completely new OS + software resets the laptop when using some applications from a live disk.

  Thank you inadance for the help

  Hi me_in_oz,

  Theoretically the laptop turn off itself due to a higher internal temperature to protect the equipment against damage.
  In this case, you will need to clean the laptop using jet of compressed air to blow the dust from the cooling fans. It is easy and takes only a few minutes to check out this article:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  Otherwise it seems to be a serious hardware problem and your laptop should be checked for professional people. Probably it s a malfunction of the motherboard

• cellular data should be on all the time?

  cell data in parameters should be on all the time?

  No, no, unless you need a data connection and there is no wifi available.

  without wifi data or cell, your iPhone is just a basic cell phone.

• Linksys connection shows poor all the time

  When I check my status on my connection why you say poor all the time? I also noticed that there are others that are related to my linkskys and my connection is always ' say poor. How can I get a better connection? Thank you

  Hello

  You really need to be checked in the forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ---------------------------------------

  It is more connected to your router that are not in your household? If so, you will need to
  reset the router security. All unauthorized connections are the security risks and also use
  your connection resource. Check with the manufacturer of the router.

  Distance and other interference can affect the quality of the connection. Also check updates
  your WiFi and NIC drivers.

  LinkSys has support and excellent help. Also check the LinkSys forums.

  LinkSys support
  http://homesupport.Cisco.com/en-us/Wireless/Linksys

  LinkSys forums
  http://homecommunity.Cisco.com/community/?category.ID=Linksys

  ==================================================================

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ====================================================

  After that the foregoing: (here, the NETWORK card and Wifi are interchangeable in the sense that the two must be
  fact that you can do if you first use).

  Follow these steps:

  Control Panel - network - write down of the brand and the model of the Wifi - double click - top
  tab of the driver - write version - click on update driver (can't do anything like MS
  is far behind the pilots of certification). Then right click on the Wifi/NIC device and UNINSTALL
  -Reboot - it will refresh the driver stack.

  If necessary to download drivers on another machine and transfer on the problem computer via
  removable media such as a USB key or CD - DVD.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  ======================================

  If necessary:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet in Vista (and Windows 7)
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• MOUSE ALL THE TIME

  Hi you guys know any body How to turn off my new mouse after you stop I tried all six usb ports in the back and 2 on the front of my pc also in bios but I see it dosent I mind, but my wife is hilarious to say it keeps him I awake SAID SHUT YOUR EYES THEN.  I JUST COVER IT WITH A TOWEL? PS IT IS A MOUSE OF VISION SUM IF IT IS ANY HELP CHEERS? JOHN LISHMAN

  Hello

  Check with the Vision of sum technical assistance and documentation to see if the light is supposed to be all the time.
  Maybe there is a way to turn off the light.

  Vision of the SUM
  http://www.Sumvision.com.CN/searchresults.aspx?PTYPE=25

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CPU Ussage on 99% all the time

  After installing SP3 everything works too slowly. I have to wait about 3-5 minutes after startup

  word or excel te...

  In the task/process Manager shows all the time CPU ussage on 99%.

  Image - system, the name user - name SYSTEM, 99% CPU

  I tried to put an end to this process, everything has worked more quickly.

  I couldn't stop this process permanently. What should I do?

  Where is the problem?

  Thank you.

  R61, Core 2 Duo - T7250, 2 GHz, 778 MHz, 1 GB RAM, XP Pro

  Antivirus: NOD32 ESET

  Firewall: base windows

  I denied automatic back-up, as I removed all accept sofware by Lenovo with fingerprint sensor. It looks like all this work more quickly.

• Internet in stall all the time

  

  Hi, I have the key above wifi 3G and also the same in the 4G and they drop out or unplug the net at random intervals, I use an antenna and have a great signal but because two of them do the same thing all the time I presume it's something to do with the pc. I use Windows 7 and it's driving crazy me.

  Some help would be great, I have used all the tricks of shooter of poorly integrated into the computer nothing works.

  Hello Shaun,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Reset TCP/IP and check.
  Reference:
  http://support.Microsoft.com/kb/299357

  If this does not help, then use method 2.

  Method 2:
  Disable the DHCP broadcast flag and check the issue.
  Reference:
  http://support.Microsoft.com/kb/928233
  (Also valid for Windows 7)
   
  To resolve this problem, disable the DHCP BROADCAST flag in Windows 7. To do this, follow these steps:
   
  a. Click Start, type regedit in the search box and then click regedit in the list programs.
   
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  b. look for, and then click the following registry subkey:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
   
  (c) in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
   
  d. in the Edit menu, point to newand then click DWORD (32-bit) value.

  e. in the new #1 value box, type DhcpConnEnableBcastFlagToggleand press ENTER.

  f. click DhcpConnEnableBcastFlagToggle, and then click change.
   
  g. in the value data box, type 1, and then click OK.
   
  h. close the registry editor.
   
  By setting this registry key to 1, Windows 7 trying to obtain an IP address by using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.
   
  Please let us know if you need more help.
   
  Thank you

• e7240 CONSTANT NOISE OF FAN NOISY / FAN RUNNING ALL THE TIME

  We received 2 nine E7240s directly from Dell, one for me and one for my colleague. As soon as I turned it on to build for my colleague, I noticed that the machine was overheating and the fan made a noise. Dell offers an upgrade of the BIOS that has not changed anything. They then changed the radiator, even once, that does not change and since then, they have changed the motherboard. My colleague went on vacation, so I don't know if the problem has been resolved, however, my laptop day you do not overheat (also of course as it has done for my colleague) BUT THE FAN RUNS ALL THE TIME. So much so that I think that the person in the room upstairs is using his hairdryer. Dell has replaced the heatsink of heat and the motherboard yesterday, I did the same update of the BIOS and the problem is even worse. As soon as I turn the thing, the fan runs all the time making a big noise. My predecessor was the E6500 and I was not bothered by noises, he did.

  The 7240 made so much noise that I want to throw it out the window , seriously, I go back to my old 5 years e6500, which is now very slow, I can not just take constant hair dryer of the fan noise! I'm waiting for Dell back to me, but I don't see what else they can do.

  I suspect a problem of design with newer models, someone with a laptop computer Latitude 13 also mentioned it on the Forum, someone else with an e7240 also said "I noticed the fan turns most of the time - it's quiet, but you don't know is spinning."  I just implemented, so the CPU is busy enough. "A person with the e6320 says"and the fan is noisy and turns far too often.

  I just bought a new Dell Latitude E7240 with Windows 7 laptop and had the same problem with overheating and the fan is running loudly all the time. I just fixed it on my laptop, it may not work for everyone but just in case I walked it here.

  The index for me was that the question has happened at home, not at work.

  • Using the Task Manager, I found that a "svchost.exe" process was always running at 25% of the CPU, i.e. to take 100% of one of the 4 hearts. For this you need view all processes, and that's why you need a local administrator account if she asks permission.
  • With right click on this process-online 'Go to services', you can study what services are hosted by this instance of svchost.
  • For each of these services, try to stop one at a time (if it helps) and see if the CPU usage goes down. For me, a clue was a service stuck on 'Stop' but never stopped.
  • The service which for me was the "HomeGroup provider." That's why the issue has happened at home and at work. The laptop had spotted my homegroup on my home network, but had not been able to accede. Maybe a problem with IPv6 that I could not turn on my desk.
  • In the Services tab in Task Manager, get on the service properties, which set to Disabled Startup Type.
  • Restart the laptop, to ensure that the service is stopped.

  That did the trick for me, and now the CPU remains less than 5% when idle. This isn't the problem that the fan is noisy when the CPU usage is high, but for me what rarely happens now.

  If you want to access files and printers on your home network without the homegroup feature, you can still do that the old way:

  • Network and sharing Center-Online avancΘs => Homegroup Connection-online 'use user accounts to connect to other computers.
  • Also in the settings advanced: enable discovery network. and Turn on File and Printer Sharing.
  • Then, you can click on your wifi network => add a printer.
  • If your office does not appear, click on "Not listed", then browse. As long as the network discovery and printer sharing are enabled, desktop PC should appear and you can connect using your local Windows user name and password.

  Hope this helps someone.

  Peter

• Windows Explorer does not work properly and hold all the time

  I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.

  Thank you for your time and enjoy your time.

  .

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• GeForce 7350LE graphics card fan is running all the time or at certain temperatures?

  I have a HP Pavilion m8147c Media Center with AMD Atlon 64 X 2 Dual Core processor 5600 + 2.80 GHz 3 GB of Ram and run these last time the parser when began to enter the mode "sleep" or something. Sometimes, there is a warning that says something like no signal DVI and one more, but still not long enough to read all this. I am running Vista Home Premium 32 bit. I had just installed a new game but enough course has nothing to do with that I used the system restore and backed up to a time before it was installed. At the beginning it was only when you play, but now, it happens with almost nothing running. This pc was purchased in July 2007 and I have another office but I let my wife use one and I use the other. I opened the folder and clean all the dust but noticed when I booted again that the fan does not work on the video card. I don't know if it lights at certain times or works all the time but I think that's the problem. He was about one hour and lights do not at all. Any information will be appreciated.

  captna wrote: thanks again for the help, I thought it was probably the case but never bothered with graphics cards before today. Any thoughts on an upgrade for not much more money? It was a pretty good pc when I bought it, but it is old, and there should be some video cards better for the same price that would work. I'll add some memory and while I am because the grandchildren need to play their games too. Do you know where to find an upgrade that would be compatible? Yet once again, I appreciate the help.

  Hello captna, here is a link for the specifications of your system. It shows that the system was delivered with a 300 Watt power supply.

  There is not much better performing video cards that work with a 300 Watt power supply. Most require at least a 400 Watt power supply or greater power.

  You could improve the feed and the video card, then possibly 4 new memory modules, but the cost would start to add up. On a system to make a few years about it, I don't know if this would be the way to go, or consider getting a new system.

  You could simply acquire a new video of the same type card and get the system back, because there was, or even try and find a graphics card fan to replace the failed fan. It would be the least expensive option.

  Your system was shipped with the memory 3 X 1 GB modules. It only supports 4 X 1 memory modules, so upgrading the memory would not help all that much. You'd probably remove the existing memory and install 4 new memory modules in order to be compatible with your system memory. It is not recommended to mix memory strips.

  Just some thoughts.

• The last shock player is completely disaster in all browsers as it crashes all the time!

  The last shock player is completelydisaster in all browsers as it crashes all the time! He must fix!

  Hello Donecek

  As those seeking answers about shockwave taken in crashes and bugs, I have these troubles for years. The problem is with the plugin and not the browser configurations as you mentioned in your posts. I already have several times these routes to follow and the plug is crashing again that I just buy a new Lenovo PC a few days ago. Also is it to Adobe to work on solutions, products, it doesn't have much sense to say the same things over and over again! as for reset, as disabling, etc. I see that this is not the way!

• Please, I do not paid my plain of adobe, so hd it s cancelled... ok... but only on a few days, I paid. My payments, today, it's okay, bur, all the time I've opened my train, I get messages talk only, I have a few days to use my software... like "you hav.

  Please, I do not paid my plain of adobe, so hd it s cancelled... ok... but only on a few days, I paid. My payments, today, it's okay, bur, all the time I opened my train, I get messages talk only, I have a few days to use my software... like "you have 02 days expire your Adobe CC '... I try to charge my computer... and many other ways to solve this case, but I didn t have successul... Someone help me? TKS!

  You bought the CC on 24-01-14, which was cancelled & then you bought new CC 07/09/14, the error message you receive is due to the cancellation because the server tent to remember, please disconnect & reconnect the CC Office application to activate the new cc. The problem should be solved.

  You have 20 GB of space, stating that you have active CC.

  Concerning

  Baudier