Lets run the multilingual method and input of blackBerry Smartphones

Similar Questions

• Problems of peripheral connection to the Desktop Manager and Apploader.exe blackBerry Smartphones

  Just got a new BB8900 last Friday. On Monday, I met a Reload software: 552 error code and after checking online forums for options on how to fix I finally had to reinstall the operating system and reinstall the new applications, which are not checked by the resettlement process. Because I was afraid to become again this error when I rebooted the machine, I immediately made backups every hour I was reconfigure the device and adding my apps.

  Today I was going to do another backup for good measure, and once I have connected my Blackberry to the computer with Desktop Manager running, Desktop Manager crashed and gave me the following error message:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DesktopMgr.exe
  Application version: 5.0.0.11
  Application timestamp: 4a4bd539
  Fault Module name: DesktopMgr.exe
  Fault Module Version: 5.0.0.11
  Timestamp of Module error: 4a4bd539
  Exception code: c0000005
  Exception offset: 000d68f5
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: c4a7
  More information 2: 473b2e845affd1758ca8e66121386d63
  3 more information: 83e8
  Additional information 4: 72466a8a5092651f7fe609f9ec3f3489

  I then tried the APPLOADER. EXE program location in program files/common files/research in motion/apploader. I had used this program yesterday to try to remove applications 1 by 1 with the hope that a single request was causing the error 552. Now for some reason any program as a problem to note the following in the error log file:

  Read 1010fffc location caused an access violation.

  I've looked through several forums and have not found a solution. What I can tell you is the following:

  (1) the phone works well, but I'm afraid by restarting the phone and another 552 error (there were two deleted apps that will be entirely deleted on reboot). Hope everything is fine but I got two of these 552 errors within 24 and the second came without any warning. If I get this error there is no way to make my backup since I can't connect to DM without it crashing.

  (2) it doesn't seem to be a timing issue, but I deleted the Intellisync folder anyway and it does not solve the problem.

  (3) have rebooted my machine without change to the problem.

  (4) have reinstalled DM Version 5 (this time without Roxio Media software) without change to the problem.

  (5) because now I get an error when connecting to DM and trying to run apploader.exe, there seems to be a setting on my phone which may cause problems (I don't know what it can be, but the APPLOADER program finds a violation of place then maybe the Blackberry software is confused about where to find my Apps?)

  (6) the BlackBerry Device Manager works fine and takes note of my device and the serial number it is necessary.

  After my last backup yesterday I probably only installed 3-4 other apps that I had lost and organized/moved files on the phone. So get this problem if shortly after that everything worked fine is staggering.

  Another update: it seemed to me I found the problem.  While RIM support recommended I do a reset, I pushed the rest of the phone feature seems to work very well.  I opted to start removing the one phone applications and then try to connect to the Desktop Manager.

  Once I removed the ZDNet Tech News For the IT professional and rebooted the phone, I was able to connect and make a backup. I'm sure this app works very well for almost everyone, but for some reason (maybe it is in conflict with another application on my phone), Desktop Manager does not do that and close. Initially, I reinstalled again and was able to make a new backup but an hour later Desktop Manager stops again (perhaps by doing an update on the news it creates a conflict with the Desktop Manager).

  Indeed summary of learning since my problem seems to be quite uniqueCurve 8900)

  (1) if the Director of bureau stops and you have tried other solutions on the forums such as deleting the folder Intellisync and reinstalling Desktop Manager, try to remove applications 1 by 1 and restart the phone before trying to connect again to Desktop Manager.

  (2) If you have had this problem, frequently make backups and keep track of what you add to your phone in case there is a problem you know the latest apps to remove (in my case, I couldn't go to my last backup since DM would be closed with the conflict of the app).

  (3) only consider a wipe of the device if you have exhausted your apps withdrawal tests.  Apps that came on your phone which notes the seller in the section about the application that RIM should be good.  Also while on AppWorld apps are offered by BlackBerry, there is no certainty that they will work on your phone.

• I try to run the security essentials and it tells me that I'm missing msvcp90.dll

  I try to run the security essentials, and he tells me that I'm missing msvcp90.dll. Same problem occurring with a real player has not re - install. How can I recover file?

  Hi BradleyMitchell,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what version of Real player installed on the computer?

  Msvcp90.dll error can be caused if the Visual C++ Library Runtime components are missing or corrupt on the computer.

  Method 1

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2

  If the previous step fails, then install the Package redistributable Microsoft Visual C++ 2008 and check if it helps.

  Microsoft Visual C++ 2008 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  You can also post your request in the Microsoft security essentials forums using the link below.

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start

• TypeError: try to run the script compilation and go on a 'mistake' in scope cleared when message returns the transfer through images for each image. Does not affect viewing.

  TypeError: try to run the script compilation and go on a contour

  Above the error message appears when moving between images - back and forth. By clicking on the OK button removes the error message and there is no apparent problem. The window that appears refers to a JAVA Script Application (I guess that FIREFOX is the application?)

  -> Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Check and tell if its working.

• is not abstract and does not substitute the abstract method callLogRemoved (net.rim.blackberry.api.phone.phonelogs.CallLog)

  Can someone tell me why im getting the following error

  is not abstract and does not substitute the abstract method callLogRemoved (net.rim.blackberry.api.phone.phonelogs.CallLog)

  callLogRemoved is set, I tried to remove it and it also gives me the same error

  Here is my code

  Thanks in advance for answer

  Net.rim.blackberry.api.phone import. *;
  Net.rim.blackberry.api.phone.phonelogs import. *;
  //*******************************************************************************//
  public class mylistener extends Thread implements {PhoneLogListener}

  {} public void callLogRemoved (int arg0)
  System.out.println("/***/"); "
  System.out.println ("CallLog removed');
  System.out.println("/***/"); "
  }
  {} public void callLogAdded (int arg0)
  System.out.println("/***/"); "
  System.out.println ("CallLog added");
  System.out.println("/***/"); "
  }
  ' public void callLogUpdated (int arg0, int arg1) {}
  System.out.println("/***/"); "
  System.out.println ("CallLog update");
  System.out.println("/***/"); "
  }
  {} public void reset()
  System.out.println("/***/"); "
  System.out.println ("CallLog Reset");
  System.out.println("/***/"); "
  }

  }

  Javadoc documentation:

  public void callLogRemoved (CallLog cl)

  but you have coded:

  public void callLogRemoved (int arg0)

  An int is not a CallLog, so these signatures do not match.

• On Windows 7, how to implementing automatic uppercase the first letter of the first book and the first letter after each period?

  I'm using Windows 7, how do I configure my system automatically capitalized the first letter of the first word and the first letter after each period?

  Thank you

  Lisa.

  Hello Lisa,.

  It's more to do with the word processor on Windows. You don't say what word processing software you use. If you use WordPad which comes free with Windows, it is impossible to do what you want to do. However, if you are using Microsoft Office Word (that you can buy) then the CAP is set by default.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I get this error message on photoshop cs6 "one or more files in the Adobe Application Support folder necessary to the operation of photoshop are missing. ' Run the photoshop Installer and re-install photoshop. Could not help people talk to adobe. Does Any

  I get the following error message when I open photoshop cs6 "one or more files in the Adobe Application Support folder necessary to the operation of photoshop are missing. ' Run the photoshop Installer and re-install photoshop. Chat room Adobe could not help. I don't have a disc - it has been downloaded online. Does anyone have a suggestion?

  Hello

  Try re-download Photoshop CS6 license with your serial key and the link below:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

• Synchronization of tasks betwwen bold 9900 and office outlook blackBerry smartphones

  If I work on my phone, and they do not appear on my desktop to outlook

  If I do the opposite, they sync of my office for my blackberry tasks

  How can I solve this problem pls?

  Hello giomarcondes,

  Sorry to hear that you have a problem with the synchronization of tasks from your BlackBerry smartphone to your Microsoft® Outlook® using the BlackBerry® Desktop Software.

  What version of the BlackBerry Desktop software do you currently use?

  Have you tried to reset the settings of your organizer?

  To restore synchronization to the BlackBerry Desktop Software Settings complete the following:

  1 connect the phone to the computer with a USB cable and open BlackBerry Desktop Software.
  2. Select Organizer from the main menu.
  3. Select reset settings.

  Then try to create a new task on your device and test again.

  See you soon,.

• You try to run the scan mode and mode interface fpga at the same time is causing errors

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:
  
  Open FPGA interface reference.
  Reserved outside LabVIEW FPGA:  turns The RIO Scan Interface.  You must set the mode Interface FPGA chassis in order to unlock the FPGA. »
  

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

  rex1030 wrote:

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  This should not be the case.  9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem.  Do you have specific issues with this?

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed.  I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later.  Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly.  Try the following steps.

  1. right click on the frame element and select Properties.  Make sure that the Interface FPGA option button is selected. \

  2. right click on the frame element and select deploy.

  3. repeat your VI.

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141

  
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:

  Open FPGA interface reference.
  Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

  The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed.  If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  I'm sorry that you have had difficulties.  Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

• cRIO - H bridge using the PWM output and input only encoder control

  Hello

  I am currently working on a project to control a 230V brushed servo motor using cRIO. The engine drives a linear step and the final project needs to create a control of position of the engine that the user is able to enter a speed, position and control steps to move to this position.

  I use a bridge using NOR-9401 and H to power the motor circuit and a PWM output to move the engine. I also have an encoder, quadrature, connected to a NOR-9403 read position and speed. I use the example program of encoder for the NI 9505 - in my application.

  There is no voltage or current on the drive circuit sensors so I wouldn't be able to have a closed loop current in this case. The scene release mechanism is such that the position is locked if the motor does not move and I do not need a torque control to keep the engine in place.

  To achieve this, I just wouldn't be able to use a single PID VI (probably the FPGA VI express for discrete PID)?

  I am not very well versed in the theory of control, and therefore no indication in the common sense would help me a lot.

  Thank you very much!

  Sexy,.

  in general, it is best to use a cascade control loop structure but in principle must also be able to use the output of the control loop of position as an input to the PWM generator. The main disadvantage of this configuration is the current limitation missing. Without current meaning is no longer the only way to protect your engine from drawing too much current to limit to the current maximum output of your diet, or to limit the maximum duty cycle of PWM. Without current information, the last method is quite inaccurate, but better than nothing.

  I agree with Mike, you should look in the examples of the 9505 module and use the controller position vi of these examples. This PID controller is optimized for motion control applications and it is implemented in the fixed point arithmetic, offering the best performance on and FPGA.

  Kind regards

  Jochen Klier

  National Instruments

• You try to run the system restore and get this error__unexpected error filename directory or volume label syntax incorrect (0x8007007B) __What can do?

  Try to run system restore and get this error
  error unexpected filename directory or volume label syntax incorrect (0x8007007B)
  What can I do?

  Hi Larry Bogie.

  1. you receive error message when creating point system or performing system restore?

  2. did you of recent changes on the computer?

  Usually, this would happen if there is any place in doubles in the system restore properties.

  To set the path of the appropriate Windows Vista restore point as follows:

  (a) click on the Start Menu.

  (b) type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.

  (c) click continue.
  The System Properties window appears.

  (d) click the System Protection tab.

  (e) to the automatic restore points, uncheck the any location invalid or duplicate

  (f) click to check drive C: with the Windows Logo.

  (g) click on apply, and then click Ok.

  (h) restart the computer and check if it works.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run the service method "run the Html Conversion" - dynamic converter problem

  Hello

  We are facing the sub question for dynamic conversion. We have Oracle COE 11.1.1.8 Linux

  Installing the last group of patches Patch 19991981 : OUTDOOR 8.4.0.140 OPATCH for PS5, PS6 or PS7

  Always face the question.

  Unable to run the 'runHtmlConversion' of service method. Null pointer is dereferenced. [Details]

  An error has occurred. The stack trace below shows more information.

  ! csUserEventMessage, 410484, dev - wcc.qbe.com.au! csFileServiceReferredToBy, http:// <> <> / cs/idcplg? IdcService = DOC_INFO & dID = 1219 & dDocName = 15393345! csFileServiceUserAgent, Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E), GET! csUnableToExecMethod, runHtmlConversion! syNullPointerException

  intradoc.common.ServiceException:! csUnableToExecMethod, runHtmlConversion

  * ScriptStack GET_DYNAMIC_CONVERSION_SUB

  3:doSubService, dID = 1219, dDocName = 15393345GET_DYNAMIC_CONVERSION_SUB, dID = 1219, dDocName = 153933453:runHtmlConversion, dID = 1219, dDocName = 15393345

  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2176)

  at intradoc.server.Service.buildServiceException(Service.java:2404)

  at intradoc.server.Service.createServiceExceptionEx(Service.java:2398)

  at intradoc.server.Service.createServiceException(Service.java:2393)

  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:102)

  at intradoc.server.Service.doCodeEx(Service.java:622)

  at intradoc.server.Service.doCode(Service.java:594)

  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1693)

  at intradoc.server.Service.doAction(Service.java:566)

  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1483)

  at intradoc.server.Service.doActions(Service.java:561)

  at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1346)

  at intradoc.server.Service.executeSubServiceCode(Service.java:4184)

  at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1222)

  at intradoc.server.Service.executeServiceEx(Service.java:4179)

  at intradoc.server.Service.executeService(Service.java:4163)

  at intradoc.server.Service.doSubService(Service.java:4073)

  at sun.reflect.GeneratedMethodAccessor370.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:601)

  at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)

  at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)

  at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)

  at intradoc.server.Service.doCodeEx(Service.java:639)

  at intradoc.server.Service.doCode(Service.java:594)

  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1693)

  at intradoc.server.Service.doAction(Service.java:566)

  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1483)

  at intradoc.server.Service.doActions(Service.java:561)

  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1415)

  at intradoc.server.Service.executeActions(Service.java:547)

  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:751)

  at intradoc.server.Service.doRequest(Service.java:1976)

  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:486)

  at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

  at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1355)

  at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1732)

  at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:223)

  at sun.reflect.GeneratedMethodAccessor292.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:601)

  at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

  at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

  at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

  to idcservlet. ServletUtils.executeContentServerIntegrateMethodOnConfig (ServletUtils.java:1680)

  to idcservlet. IdcFilter.doFilter (IdcFilter.java:457)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.lang.NullPointerException

  to dynamicconverter. DynConverterHandler.doConversion (DynConverterHandler.java:1730)

  to dynamicconverter. DynConverterHandler.runHtmlConversion (DynConverterHandler.java:1498)

  at sun.reflect.GeneratedMethodAccessor427.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:601)

  at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)

  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)

  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)

  ... more than 69

  Please help us to solve the problem,

  Thanks in advance.

  Tasks/6 01.23 Manager 17:22:46.296 htmlexport_19 caused by: java.io.IOException: cannot run program "/ u01/app/Middleware/Oracle_ECM1/ILO/linux/lib/contentaccess/htmlexport" (in the directory ' / u01/app/Middleware/Oracle_ECM1/ILO/linux/lib/contentaccess '): = 13, Permission denied error

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19 to java.lang.ProcessBuilder.start(ProcessBuilder.java:1042)

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19 to intradoc.taskmanager.TaskLauncher.startExe(TaskLauncher.java:177)

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19... 2 more

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19 caused by: java.io.IOException: error = 13, Permission denied

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19 at java.lang.UNIXProcess.forkAndExec (Native Method)

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19 to java.lang.UNIXProcess. (UNIXProcess.java:135)

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19 to java.lang.ProcessImpl.start(ProcessImpl.java:130)

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19 to java.lang.ProcessBuilder.start(ProcessBuilder.java:1023)

  The tasks/6 01.23 Manager 17:22:46.296 htmlexport_19... 3 more

  > taskmanager/6 01.23 17:22:46.297 withdrawal htmlexport_19 launcher for task: htmlexport that has been marked as finished

  Permission denied is the main reason for the error. As you saw command line as well as executable files are evidence of permission denied for user wccadm. If please check or give higher set of permissions for the executables under u01/app/Middleware/Oracle_ECM1/ILO/linux/lib/contentaccess and test it.

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• Cannot run the autonomous block for input of associative array parameter

  Hello

  I have created an associative array in a package-PKG_CMT_DAP

  TYPE r_supply_type_id IS RECORD(
                                 supply_type_id            varchar2(50));
  TYPE t_supply_type_id IS TABLE OF r_supply_type_id INDEX BY BINARY_INTEGER;
  l_supply_type_id t_supply_type_id;
  

  Later created a test procedure with an input of the above kind parameter

  create or replace
  procedure test_prc(p_in_st_id IN PKG_CMT_DAP.t_supply_type_id)
  AS
  v_input1 number;
  v_input2 number;
  BEGIN
  FOR z IN 1..p_in_st_id.COUNT 
  LOOP
  DBMS_output.put_line(p_in_st_id(z)supply_type_id);
  END LOOP;
  END test_prc;
  

  How to update successfully.

  Created a stand-alone as block below

  DECLARE
  BEGIN
  test_prc(p_in_st_id=>(100,200,300));
  END;
  

  Above am past in 100,200,300 as an input string, and the expected output should display all the numbers above on the screen.

  But it throws the below error

  Error report:
  ORA-06550: line 3, column 1:
  PLS-00306: wrong number or types of arguments in call to 'TEST_PRC'
  ORA-06550: line 3, column 1:
  PL/SQL: Statement ignored
  06550. 00000 -  "line %s, column %s:\n%s"
  *Cause:    Usually a PL/SQL compilation error.
  *Action:
  

  Could you please help me where I am doing wrong?

  Kind regards

  Claudy Kotekal

  Claudy,

  While calling the procedure, you must declare the variable of type table. Give the values for the elements in the begin block and then pass that variable in the procedure. Something like below:

  Declare

  in_array PKG_CMT_DAP. r_supply_type_id;

  Begin

  in_array (1) .supply_type_id: = 100;

  in_array (2) .supply_type_id: = 200;

  in_array (3) .supply_type_id: = 300;

  test_prc (in_array);

  end;

  NOTE: There might be a few problems with my code syntax, but logic would be same.

  Try this and let me know.

  Thank you

• Problems running the check disk and disk defragmentation

  I tried to throw a disc defrgmentation and I ask rubbing a disk check I don't know how. I tried to go to the Run comand.com, which is written ' chchdsk/f' and tells me that it is a function of "read only". My system information, it says I have Service Pack 3. Help, please. Everything else works fine.

  When you run chkdsk /f in the command prompt window, you should see a message like this:
  The type of the file system is NTFS.
  Cannot lock the current drive.
  Chkdsk cannot run because the volume is in use by another process.  You want to schedule this volume to be
  checked on the next reboot of the system
  ? (Y/N)
  If you answer "Yes" by typing Y, chkdsk /f turns to the next boot XP (or he will try to run).
  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do it yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run, and in the box enter (or copy and paste):

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Look in the Application log for a recent event proposed Winlogon, and it should look like this:

  Event type: Information

  Event source: Winlogon

  Event category: no

  Event ID: 1001

  Date: 04/08/2010

  Time: 11:25:57

  Description:

  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You

  may cancel the disk check, but it is strongly recommended

  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.

  CHKDSK checks Usn Journal...

  Audit of the USN Journal is complete.

  39070048 KB total disk space.

  28017948 KB in 100571 files.

  56540 Ko 10556 index.

  0 KB in bad sectors.

  236440 KB in use by the system.

  65536 KB occupied by the log file.

  10759120 KB available on disk.

  4 096 bytes in each allocation unit.

  9767512 total allocation on the drive units.

  2689780 allocation units available on disk.

  Windows has finished checking your disk.

  Please wait while your computer restarts.
  If your report has errors, you may need to run chkdsk /f again until the report indicates no error.  If you get errors, then your hard drive may be failing.
  If you want that take us a look at your report of chkdsk that you see in the event viewer, you can copy it to the Windows Clipboard and paste it back here like this:
  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis
  .  Remove personal information from your information
  After having stuck if you are forced to do so.
  If you paste an event, it will look something like this annoying system startup event:
  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer
  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.
  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!