Lexmark wireless printer connects to the Acer laptop.

Similar Questions

• Wireless printer connects to the laptop, even though she has worked in the past.

  My printer HP Officejet 6700 Premium connects to my laptop HP Pavilion 15, although he has worked in the past. Other computers around the House connect to the printer and print documents without any problems. When I go to print from Microsoft Word, it says my printer as offline.

  I tried to remove the printer from my devices and printers list (so that I could try to reconnect the printer), but he is not leaving the list after clicking "remove hardware".

  Could someone help me please you troubleshooting? I really need to be able to resume printing my documents for the school.

  Thank you!

  Hi @OfTheFalls

  I'd love to help you reconnect your 6700 printer and computer.

  I suggest using the HP print and Scan doctor first of all, it can solve many printing and scanning errors, network or USB problems, driver problems and conflicts of port connection. Click here to download and run the print and Scan Doctor >www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks ( ), the tool did not find any problem.

• HP Envy 4500: Printer connected to the network; laptop computer connected to the network; laptop cannot find the printer!

  I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem.  The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information).  It is on the same network as my laptop.  However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page!  I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.

  Any thoughts on how I can get the laptop to see the printer?

  Henchman21,

  Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.

  Solution

  1. do you have the HP Envy 4500 connected to your computer via the usb cable

  2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run

  * Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.

  2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.

  2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...

  3. you should check if you have administrative rights on the computer.

  I hope that the solution I provided will work for you.

  Let me know if the steps above don't work for you

  Thank you

• printer connected to the computer laptop n, t work

  I connected my his laptop to HP for my printer. It's a LexmarkX2480. My laptop arrives correctly at printing, but does not print.

  Please confirm that you are using Windows 7.  What version and the service pack?

  Has your laptop computer upgraded to Windows 7 or Win 7 the only version of Windows already installed?
  If you upgrade from a previous version of Windows, the printer has been installed on this version? If so, did you uninstall and unplug the printer before moving to Win 7?

  You have all other printers installed on this computer? If so, can you print to them?

  What does that mean?

  My laptop can correctly print

  What happened when you first connected the printer to the computer?

  You get the error message?  If Yes, what is the full text, without paraphrasing?

  Is there a printer icon in devices and printers?  If so, right-click on it and select the Ports tab.  Without clicking in the list of ports (you can use the scroll bar or expand the columns by clicking on & drag in the header), which is the 'Port' and 'Description', which is checked and highlighted?  Click Cancel to exit the printer properties dialog box.

• Problems connecting an older Acer laptop with Windows XP using a dlink router

  I recently bought a new router dlink (N 300 Router wireless) and installed on my Dell desktop computer that is running Windows 7 Home Premium, desktop as well as my Sony Vaio laptop which runs the same OS connects fine to the internet. When I try to connect to the Acer laptop it does not connect to the internet, when I try to 'Fix' the wireless connection, he says he can't fix it. It allows to connect very well with older dlink router but I had to replace it, the new router says it's compatible with Windows XP. Does anyone else have this problem?

  Hi Bluemoongal,

  If you try to connect the Windows XP laptop to the wireless router, follow the steps described in this document...

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• SE message: printer not detected, the printer connected to the wireless modem and I can't print

  Original title: printer connected to the WiFi modem and pc but get message saying unable to print printer not detecded

  printer not detected on pc but it is installed and signel wirless right message bed printer not detected

  Hi howard douglas.

  1. were you able to print before without any problem?

  2. when the problem started?

  You can try to connect the printer directly to the computer and check what is happening.

  Check out the link:

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• My lexmark wireless printer seems to not work whenever I run paper he says not comm.with printer

  I have a lexmark wireless printer that seems not to work whenever I run paper, its says not comm with printer

  Hi chinny111,

  ·         If it works well before?

  ·         Did you change?

  ·         What is the operating system installed on the computer?

  You can see the following Lexmark article and check if it helps.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  Respond with more information so we can help you best.

• WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium

  WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium. It works continuously with a cycle detection, connection, loss of connection; detection, connection, loss of connection, etc... The router works through this cycle, basically acting as if I disconnected and then reconnected to the power to reset, it disrupts my Internet connection to my Wired iMac and wireless, another office to the floor. Paid for Linksys support today and through remote access, he put up a new network on my desktop (iMac). After finishing, the problem still exists. When I told him that the problem had not been corrected, he said just wait an hour or two and it should work itself. She, of course, did not himself. Any ideas out there?

  Nevermind - I seem to have solved the problem with a simple firmware. Funny how the Linksys technician support don't think to ask what version of the router I have or suggest that I should try to upgrade firmware first. However, he is quite good at trying to upsell me for a new router instead of trying to help me solve the problem I had. It makes me want to go buy Netgear next time, thanks a lot!

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• Wireless router connected to the provision of internet access no

  I've just moved to a new place and have connected my router (WRT610N) wireless to my switch located in the smart panel in the basement (SE2500). Connect my ultrabook to the wall confirmed that the signal from the switch in the basement is sent up, but if I connect my router making wireless and connect to the wireless router I have no internet access. Someone knows what's going down? WRT610N

  Yes, but you must properly configure the 2nd router.  Wired is the only medium, 2nd router, disable DHCP, set router IP 192.168.1.2, connect you via LAN - LAN.

  Go here for help.

• cannot connect to the HP laptop.

  cannot connect to the HP laptop. safe mode didn't work or system restore. have windows vista. This error:

  C:\WINDOWS\WinSxS
  \x86_microsoft. Windows.gdiplus_6595b64144ccf1df_1.0.6002.18005_none_9e50b396ca17ae07\gdiplus.dll if the other is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support

  Hi mikiduki,

  I suggest you do the startup repair that may help you resolve the issue.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Follow the instructions in the link below to perform the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  You can try to disconnect all external devices on the machine, and then start the computer.
  Sometimes, an external hardware can also cause the issue during the startup process.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Samsung Galaxy S3 does not connect to the DELL laptop

  Hello

  I use the operating system Windows 7 Home Premium 64 - bit with the Intel processor i5-2450 M CPU @2.50 GHz. recently the past 4 months, I have observed that Samsung Galaxy S3 does not connect to the Dell laptop

  We could not see the content of Samsung Mobile in the PC. No Popup message is coming

  I tried the options below

  1. connected with different cable to the laptop, the original cable

  2. try with Samsung Kies

  Can you please help us in this regard that I wasn't sure if the drivers problem.

  We have seen the error in the mobile below.

  "Could not find the software on your computer that can recognize your device.service Pack 3, Windows Media Player, version 10 or greater, for Android File Transfer for MAC OS or Windows XP must be installed.

  You can download and install Kies on your http://www.samsung.com/kies computer to synchronize with your device data, back up the data and upgarde your device (Windows and Mac OS are supported). »

  I use Windows 7 and Media player version 12.0.7601.18150.hence was not, of course, why the Samsung Galaxy S3 does not connect to the DELL laptop

  Thank you

  Kalyan

  Hi Kalyan,

  From my research, this error message indicates that you have an old version of Samsung drivers installed on the computer.

  Several clients are faced with this question after that they have updated the version of Android to 4.3, but the version of the driver is not updated.

  I suggest you uninstall all traces of Samsung is installed in the list programs and then reinstall the device drivers Samsung from the link provided in the previous post.

  To uninstall a program see the link below.

  Uninstall or change a program

  Once you uninstall programs related to Samsung download and install the drivers for Samsung devices.