LGS308 CLI

Similar Questions

• Satellite M70 - CLI - cannot install display or SM Bus controller driver

  Hello

  I have a Satellite M70 - cli PSM73C-CL100E and I got a new hard drive and loaded Windows xp. I went on the Toshiba site and downloaded and installed all the drivers. I have no problem with the wifi atheros, the sound, modem or chipset drivers. I also updated the bios v2.10 all successfully.

  The problem is with the video card. I used huntersoft program and know that the chipset is an ATI. He also says it's an ATIradeon xpress 200 m with 128 MB DDR shared video. When I try and install the ATI driver it says Setup could not complete the installation. Try to configure your graphics card with the standard vga driver.

  I spent hours on the net. I tried the ATI L30 XP driver and it does the same thing. I tried the driver ATI radeon xpress 200 m and it says not found material. I don't have the original CD I know he works as the old drive worked fine. Unfortunately, I wiped as well to put in a laptop more old. I should have gotten the drivers out of it. :(

  Does anyone have an idea? It drives me crazy! Thanks for any help. Marilyn

  Hi mjmx4,

  How have you tried to install the display driver?

  Normally, you can install the driver (screen) If you run the setup.exe file that comes with the driver package. Follow the instructions on the screen thanks to the installation of the driver, the driver will be installed.

  Alternative you can install the driver if you go to Device Manager and right click on the graphics card. Choose update driver and use advanced installation where you can choose the directory and the driver yourself.

  By the way: before starting with the installation of the driver, you must install Service Pack 3 for XP.

• Sony clie hot-sync with Palm desktop on Vista (32 bit)

  I got my Clie TH-55(Palm OS 5.2.1) for some time now, say 2 years, but recently, I made the switch to Vista (not by choice, I got a new laptop for free). I had been synchronize my CLIÉ Palm Desktop and so when I got my new laptop, I went and download desktop 4.1.4e in the hopes that I could continue the sync on vista. The installation went well, it is, I can do a hot sync but none of my data transfers. If I create a new contact on my handheld, it will not be displayed on the desktop and even vice versa. When I check the hot sync log, it says that there are no errors. I didn't know if I should go to the forums of Palm or Clie forums so I apologize if this is no longer a Clie problem which should be in the forums of clie. Thanks in advance...

  
  

  Message relates to: None

  I found the problem, it had to do with the running of the Office to palm as an administrator. Once that I thought that was the problem, I put it to always run as administrator.

• Enable remote management on FVS336gv2 through CLI

  So I did something incredibly stupid to try to solve a problem, that we had and I have disabled HTTPS remote management in the GUI and now I am not able to make the interface of the routers.

  I can however, Telnet to the router from Telent is activated.

  How can I enable https remote via the CLI management? I can't find anything in the CLI PDF or I'm missing something.

  Thanks in advance!

  Hey,.

  Should be enough for;

  # remote_management https system set up

  # access_type all

  y # enable_ipv4

  # ip_version ipv4

  # Save

• The CLI for GS724Tv3 user manual?

  Is there a reference CLI available for download somewhere for the series switches GS724T?

  (great forum BTW here, very useful so far!)

  Micky

  I think that smart switches with no console port has no option to order...

• software for sony clie PEG-SJ22/E on a sony vaio 32 bit

  Need software for sony clie PEG-SJ22/E on a 32-bit sony vaio computor

  Hello

  If you are referring to Windows 7, the PEG-SJ22/E device is not compatible.

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Sony+Clie+PEG-SJ22+16MB+Color+Handheld+PDA&v=Sony&uid=PEG-SJ22U&l=en-US&pf=6&pi=2&c=Communications+Devices&sc=PDAs&vd=all&os=64-bit

• Migration of Clie NR70V Palm OS for Android

  Hello

  We can migrate from Palm OS 5 to Android in a Sony Clie NR70V.

  I would like to recativate my old Clie with a modern operating system.

  TIA, best regards.

  Hello and thanks for your message.

  Unfortunately Sony cannot comment on the updates of the Firmware related to features that are not available. However, Sony appreciates your comments and will be forwarded to the Department for proper review.

  Thank you.

• Ink CLI-226 & CLI - 221

  I have 2 printers that use inks 226 and 221.  The cartridges are similar. Are they interchangeable?

  Hi excolprof,

  No, the CLI-226 are specific to the models appearing on the box that the cartridges come in as the 221 being specific to its own list of printers.  The reason is that there is a chip on the ink tanks that the printer uses for the determien what the correct ink tank is located in the appropriate housing, so if you use an incorrect ink tank, you will receive an error causing the printer does not work.

• (Ink Cli 8) Where can I find a list of EVERY single printer that uses Cli 8 ink cartridges?

  I bought a set of Cli-8 cartridges when I owned a MP510 printer, but the printer is dead.

  I am now looking to buy an all-in-one printer that uses cartridges Cli 8 if the don't to lose.

  Or should I just buy a newer model of the printer? I looked on Amazon for printers, but none of the printers listed seem to be compatible with ink.

  Hello.

  Here is a list of printers that used the CLI-8 series ink tanks.  Please note that since these printers have been out of production for many years, they may no longer be available to most retailers.

  PIXMA MP600
  PIXMA iP6600D
  PIXMA MP970
  PIXMA Pro9000
  PIXMA MP500
  PIXMA MP830
  PIXMA MP960
  PIXMA MP800R
  PIXMA MP810
  PIXMA MX850
  PIXMA Pro9000 Mark II
  PIXMA iP4500
  PIXMA iP4300
  PIXMA iP5200
  PIXMA iP6700D
  PIXMA MP800
  PIXMA iP5200R
  PIXMA MP610
  PIXMA iP4200
  PIXMA MP530

  It has not responded to your question or problem? Find more help contact us.

• Cli.EXE - Application error at startup

  MPSampleSubmission

  Dear Sir.

  Greetings

  When I start my computor then I get this massage. "Cli.EXE - Application error" Please can you help me what I need to do or how to remove.

  Thanks for all your support.

  Thank you & best regards

  Hinda

  Hi Syed Hassan,

  1. What is the full error message that you receive?

  2 did you recent hardware or changes to the software of the system?

  CLI.exe files are used for the ATI catalyst driver programs, that work with the ATI graphics card.

  Method 1:

  If you have installed the ATI graphics card on your system, then try to update the latest version of the drivers for video card and check if the problem persists.

  AMD support & drivers

  How to manage devices in Windows XP

  Method 2:

  If you still experience the problem, you can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to complete the clean boot.

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in the article above to configure Windows to use a Normal startup state.

• New printer using cartridges CLI-225 and 226 - CLI?

  I'm in the market to replace my two old printers. I like that one of them has a document feeder. The other, my faithful very MG6120 Canon, is always excellent and I have a lot of ink for her (cartridges CLI-225 & CLI-226). I wonder if any of the newer models, which have feeders, also accepts this variety of ink cartridges.

  Hi improve,

  We have not all current model printers with an ADF (ADF) and also to use the PGI-225 ink tanks and 226 - CLI.  We ask that you please call or write to us at one of the methods on the page contact us for other options that are available to you.

• CLI.exe-application error

  I get a message error every time I start up Windows:

  CLI.exe-application error

  If I click 'OK', he goes, but I want to get rid of the rootcause. The error message is still there on

  the office at startup

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you follow the steps mentioned below.

   

  Step 1:

  I suggest you to check in safe mode if you are able to open Windows Explorer without any problem. Follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the boot menu and press ENTER.

  c. check if the issue persists.

   

  Step 2:

  Perform a clean boot, and then open windows Explorer and check if the problem still persists. Follow the steps mentioned in the article below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic update of time of the framework LGS308

  A little frustrated... I want to set the switch so it takes a form of update time to my router.  However, when I go in configure the address of the time server that I'm not able to get to the SNTP or DNS configuration menu.  I turn on the service, but when I try to add my info I just get a spinning cirlce.  Clearly, Miss me something...

  I understand that you must specify DNS before you can specify SNTP.

  It happens on all four of these switches.

  LGS308 firmware 1.1.0.21, set static IP switch

  router Asus RT-AC5300 with merlin 380.62 use pool.ntp.org as my time server and openDNS for DNS services

  Try using the Chrome browser.

• LGS308 Port Trunking Switch Cisco 3650

  I have a Cisco 3650 switch I need to connect my Linksys LGS308 again. I have the port trunking install everything on the side of Cisco, however, I'm not very familiar with trunking on the side of Linksys. What should the configuration looks like on the side of Linksys? Currently, I installed port no. 1 port trunking, and all VLAN belong them to this port. Once I have save the configuration, I can access is no longer the switch. Any ideas?

  The series of LGS Linksys has the same methodology VLAN that Cisco switches series SG.

  Which means a Port marked as port VLAN Trunk will be no marked member (PVID) of a single VLAN and can have several VLAN Tag assigned.

  Example:

  Cisco 3650: Port 1 set as a VLAN Trunk; PVID = 1 and tag VLAN 2,3,4

  LGS308: Port 1 set as a VLAN Trunk; PVID = 1 and tag VLAN 2,3,4; Management VLAN = 1,

  The IP address of the subnet IP of VLAN1

• Unable connect to the webgui LGS308 crashes at 90% on the treatment of the data

  Hello

  I have a LGS308 but I can not connect to the webgui interface more.

  The user name and password are correct, but there is a dialog box with the title "Data processing" and a progress bar.

  This goes up to 90 percent and crashes there.

  Already removed the power and put the power back in, but no result.

  Always the same, also tried other browsers, always the same result. (or hangs at 80%).

  Is this a known issue? and is there a solution for this?

  I really need to reconfigure the switch.

  Had the same problem, thanks for the tip on the expiry of telnet/password. Worked fine for me also.

  Looks like you can set the password, time-to-live in telnet "cisco" config mode.

  Telnet to the switch

  Opening of session

  Press Ctrl-A

  Type "lcli" to the ">" prompt

  Connection again...

  Type "conf t".

  Type "aging 0 passwords"

  Press Ctrl + Z

  Type "wr" to save.

  Fact!