'Library not found or failed to load' on the other system

Similar Questions

• Library not found or failed to load

  Hi all

  I am a first year student competely on LabView. Here's my problem:

  I got a file .vi of my co-workers, but I couldn't run.

  The problem is "this vi to own library is missing. According to the solution on the Internet, I selected the file and it disconnected from the library.

  Then the next problem. "Library could not be found or failed to load." And I have no idea how fix the problem now.

  Should I connect it to a library? Or should I do something else?

  My version is LabView2015, and I only got a .vi file and can't get in touch with the guy who worked on it.

  I thank very you much. And please let me know if something is necessary.

  Hello

  the library should be included in the project with the vi. If you have just a vi can create a project and include the library. It will be useful if you can join the vi here.

  concerning

  Spengler

• 4.6 AIR 19 iOS Flex 9 ADT package fail: library not found for - ISystem.B

  Immediately after the upgrade to Xcode 7 and try to debug my Flex AIR project, it does not package for iOS. This occurs when you try to debug on the device (iPad 2 iOS 9). Attention of:

  
  

  ---------------------------------------

  Create iOS package

  ID: library not found for - ISystem.B

  ID: library not found for - Igcc_s.1

  Compilation failed during execution: Id64

  …

  ---------------------------------------

  The two Adobe Flex superimposed 4.6.0 with AIR 18.0.0.199 and Adobe Flex superimposed 4.6.0 with AIR 19.0.0.193 fail with the same error.

  In addition, debugging in the Simulator, we get another warning at startup:

  ---------------------------------------

  Launch of iOS app

  [MT] DVTAssertions: Warning in /Library/Caches/com.apple.xbs/Sources/DVTFrameworks/DVTFrameworks-8201/DVTFoundation/Plug InArchitecture/PlugInManager/DVTPlugInManager.m:257

  Details: Asked but can't find extension point with the identifier Xcode.DVTFoundation.DevicePlatformMapping

  Object:

  Method:-extensionPointWithIdentifier:

  Discussion: {number = 1, name = hand}

  Please fill a bug report at http://bugreport.Apple.com with this warning message, any useful information you can provide.

  ---------------------------------------

  
  

  The first defect is really the block. I can't usefully working on the project until this is addressed. No difficulty in suggestions welcomed, TIA.

  Please follow the following to workaround [Applicable only for MAC]

  1. download and install Xcode last version 7 (we tried on beta xcode7.2)

  2. create a symbolic link or copy of Xcode way ld: /Applications/Xcode-beta.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bi n/ld to /lib/aot/bin/ld64/ld64

  I hope it solves the problem.

• Library not found for - lstdc ++

  My application was running and building quite happily, but I wanted to use the IOS Simulator to take pictures of a few screen.  This used to work, now, since the upgrade to Yosemite, I get this error:

  Error occurred during the application of packaging:

  LD: library not found for - lstdc ++

  Compilation failed during execution: ld64

  How to fix? Anyone?

  Sue

  In fact he just had the path to the iPhone SDK Simulator stated incorrectly.  Fortunately, the laptop if it was right and was able to copy the path. Instead of stating: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs, it's just a Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs - all good now.

• C error: ld: library not found for - introduction collect2: error: ld returned 1 exit status

  I'm trying to compile the "Hello World" code C base with gcc, but the following error message:

  LD: library not found for - introduction

  collect2: error: ld returned 1 exit status

  The code itself is nice, he ran into another computer with no problems.

  First gcc had manually, the problem, installed and then uninstalled and installed with homebrew and still have the problem. How can I fix?

  (Have the 5.1.0 version of gcc)

  Okay, so nobody has responded, but I found a solution. This is the version of gcc, apparently more recent versions have this bug, one that works and compiles the codes is the 4.9 version, in case it would be useful to someone.

• Property not found on flash.display.Loader charger and there is no default value

  Hi, I want to drag a single image of set of images loaded via xml, but it is showing an error.

  ReferenceError: Error #1069: property not found on flash.display.Loader charger and there is no default value.

  "hand / mouseDownHandler ()" thanks in advance...

  XML

  /////////////////////////////////////

  <? XML version = "1.0" encoding = "utf-8" standalone = "yes"? >

  < GALLERY >

  < IMAGE THUMB = "photo_tb/pic1.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic2.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic3.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic4.jpg" / > "

  < / GALLERY >

  /////////////////////////////////////////////

  package

  {

  import flash.display. *;

  import flash.events. *;

  flash.net import. *;

  import flash.display.Sprite;

  import flash.display.Loader;

  import flash.events.MouseEvent;

  main/public class extends MovieClip

  {

  private var levelXML:XML;

  private var myLoader:URLLoader;

  private var my_images:XMLList;

  private var my_total:Number;

  private var my_thumb_width:Number;

  private var container_mc:MovieClip;

  private var my_mc:MovieClip;

  public void main()

  {

  levelXML = new XML();

  var XML_URL:String = "data / data.xml."

  var myXMLURL:URLRequest = new URLRequest (XML_URL);

  myLoader = new URLLoader (myXMLURL);

  myLoader.addEventListener (Event.COMPLETE, lanceApp);

  }

  private void startApp(e:Event):void

  {

  var myXML:XML = new XML (e.target.data);

  my_images = myXML.IMAGE;

  my_total = my_images.length ();

  createContainer();

  callThumbs()

  for each {(var niveau: XML dans levelXML.level)}

  trace (Level.leveltitle);

  trace (Level.identifyme);

  //}

  }

  private function createContainer (): void

  {

  container_mc = new MovieClip();

  container_mc.x = 50;

  container_mc.y = 50;

  my_mc.x = 100

  my_mc.y = 100

  addChild (container_mc);

  }

  private function callThumbs (): void

  {

  trace (my_total)

  for (var i: Number = 0; i < my_total; i ++)

  {

  'loader_' + i

  my_thumb_width = 100

  var thumb_url = my_images[i].@THUMB;

  var thumb_loader = new Loader();

  thumb_loader. Load (new URLRequest (thumb_url));

  thumb_loader.contentLoaderInfo.addEventListener (Event.COMPLETE, thumbLoaded);

  thumb_loader. Name = i;

  thumb_loader.x = (my_thumb_width * I);

  }

  }

  private void thumbLoaded(e:Event):void

  {

  var my_thumb:Loader = Loader (e.target.loader);

  container_mc. AddChild (my_thumb);

  my_thumb.contentLoaderInfo.removeEventListener (Event.COMPLETE, thumbLoaded);

  Sprite: var loader = Loader (e.target);

  var my_thumb:Loader = Loader (e.target);

  trace (my_thumb)

  my_thumb.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler);

  my_thumb.addEventListener (MouseEvent.MOUSE_UP, mouseUpHandler);

  }

  private void mouseDownHandler(e:MouseEvent):void {}

  var my_thumb:Loader = Loader (e.target.loader);

  container_mc. AddChild (my_thumb);

  e.target.startDrag ();

  }

  private void mouseUpHandler(e:MouseEvent):void {}

  trace ("mouseUpHandler");

  var sprite: Sprite = Sprite (event.target);

  sprite.removeEventListener (MouseEvent.MOUSE_MOVE, OnMouseMoveHandler);

  sprite.stopDrag ();

  }

  private void mouseMoveHandler(event:MouseEvent):void {}

  trace ("mouseMoveHandler");

  event.updateAfterEvent ();

  }

  }

  }

  In your function mouseDownHandler target you 'e.target.loader', however, e.target is a Loader and Chargers have no property loader.

  private void mouseDownHandler(e:MouseEvent):void {}

  var my_thumb:Loader = Loader (e.target.loader);

  Try just "e.target" instead since this should be your code is looking for.

  var my_thumb:Loader = Loader (e.target);

  Although you might find you need to use "e.currentTarget" instead since e.target can point to the content of the loader instead of the charger itself

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• Photoshop CS6 not found after downloading and putting in the serial number

  Photoshop CS6 not found after downloading and putting in the valid serial number. Only the extended version will appear as available. How I just downloaded photoshop CS6 only?

  Thank you!

  If you follow the 7 steps you can directly download a free trial here: Download Adobe CS6 tests: direct links (without Assistant or Manager) | ProDesignTools

  and activate it with your serial number.

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• Not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system

  HP Pavilion Dm1 4000au, windows 7 Home premium 32-bit, error: not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system diagnostics, how do I 3Fo system to be installed my notebook/laptop...please help me...?

  If F9 does not run the diagnostic, then most likely to replace the hard drive.  Once the new drive in place, start the recovery DVD series that was made when the PC was new.  If you do not make them, or they are lost, order a new set of HP.

  See here: http://support.hp.com/us-en/document/bph07143

• When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "

  original title: xvidcore.dll not found.

  Nice day

  When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "  The screen becomes blue white.  I am operating Windows XP SP3.  Any advice much appreciated

  Thank you, Brian Newman

  No guarantee, but it might be interesting to try to download
  and install the XviD Codec:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/
  (name of the file to download: Xvid - 1.3.2 - 20110601.exe)

  Good luck...

• Last night my operating system not found a set file and reloaded among other Outlook express things - is it possible to recover the address book, folders and emails?

  Last night my operating system not found a set file and reloaded among other Outlook express things - is it possible to recover the address book, folders and emails?

  original title: Outlook Express problem

  Hi John,.

  Try to locate your data from outlook express:

  Click on start-> Run & paste-> %userprofile%\Local Settings\Application Data\Identities

  You will see the folders as {xxxxxx-xxxx-xxx-xx-xxxxxxxxxxxx} click-> Microsoft-> Outlook Express, you should be able to locate the DBX files, these are the outlook database files. Ideally, you should see inbox.dbx, Sent Items.dbx... check the size of the file.

  Now to get it back on outlook express, open outlook express-> click on tools-> Options-> maintenance-> the storage location.

  Click on change location, and then select the location that you have your data in.

  For the address book, see: click Start-> Run and paste the following:

  %USERPROFILE%\Application Data\Microsoft\Address Book

  Address book with wab extension, these should reflect your Outlook Express user name.

  I hope this helps.

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc