License AnyConnect disables AnyConnect essentials

Is this correct?  It does not seem right.  I bought a mobile Anyconnect license to add to my ASA 5505, who already had active Anyconnect Essentials.

I received the watch activation key that I would go to:

 License : Base Max Physical Interfaces : 8 VLANs : 3, DMZ Restricted Dual ISPs : Disabled Trunk Ports : 0 Failover : Disabled Inside Hosts : 50 VPN DES Encryption : Enabled VPN 3DES and AES Encryption : Enabled VPN Peers : 10 SSL VPN Peers : 2 Shared SSL VPN licensing : Disabled AnyConnect Mobile : Disabled Linksys VPN Phone : Disabled AnyConnect Essentials : Enabled Advanced Endpoint Assessment : Disabled UC Proxy Sessions : 2 UC Phone Proxy Sessions : 2 Botnet Traffic Filter : Disabled 

TO:

 Inside Hosts : 50 Failover : Disabled Encryption-DES : Enabled Encryption-3DES-AES : Enabled Security Contexts : Default GTP/GPRS : Disabled AnyConnect Premium Peers : Default Other VPN Peers : Default Advanced Endpoint Assessment : Disabled AnyConnect for Mobile : Enabled AnyConnect for Cisco VPN Phone : Disabled Shared AnyConnect Premium License server : Disabled Shared License : Disabled UC Phone Proxy Sessions : Default Total UC Proxy Sessions : Default AnyConnect Essentials : Disabled Botnet Traffic Filter : Disabled Intercompany Media Engine : Disabled Cluster License : Disabled vCPUs : 0 

The Mobile license should not disable Essentials. That could be a mistake made by the license server.

I recommend to open a TAC case and urging them to please put in the queue for license Global (GLO) operations. Request GLO re - issue an activation key which includes your already approved essentials.

Tags: Cisco Security

Similar Questions

  • Do I need a license AnyConnect Essentials after upgrade to 8.0 (4) 9.0 (1)

    Hello

    I have an ASA 5510 executes code 8.0 (4). It has a WEBVPN license which allows a number of connectivity of peers with a 2.2 AnyConnect ssl vpn client (I have not needclientless SSL VPN features). As AnyConnect Essentials/Premium was introduced on the 8.2 code, does this mean I have to get at least an AnyConnect Essentials license if I upgrade to the latest code, or my WEBVPN license will still suffice?

    If you already have the WebVPN license when running on the 8.0.4, version then you need not purchase a license more.

    The WebVPN license is the equivalent of the AnyConnect Premium license.

    If your output to 'see the version' shows WebVPN for more than 2 users license, then you're OK when you upgrade to version 9.0

  • Would become Anyconnect essentials Premium AnyConnect vpn on asa

    Dear team,

    We have a pair of cisco ASA 5520 with version 8.2 (5) works well with active mode / standby. As the situation requires, we intend to change the SSL vpn to clientless SSL VPN (AnyConnect Premium) to anyconnect vpn with mobile clients (IOS & Android)

    Please specify below

    (1) I have read, we cannot have two Anyconnect Essentials & AnyConnect Premium on the same system time. We need to disable accordingly to our need-pl correct me?

    (2) what is the best way to have the device for end-user client deployment? pushing of ASA or install individually on the system? Can I have the best, I mean the latest version of windows, client MAC e.t.c I shud get?

    While pushing ASA LU that much memory cache will be used, since we have IPS (AIP - SSM) modules has also installed on ASA who shud method I adopt here?

    (3) what is the exact product for license Anyconnect Essentials & customer name mobile (IOS & Android) we get from cisco?

    (4) once I get the correct license how do I active in systems? should I remove the failover command and install the license in two devices separately?

    (5) Finally, I need to authenticate vpn anyconnect essentials with LDAP that is already configured for clientless SSL VPN(AnyConnect Premium). any suggestions here?

    Below the version Sh emitted by the devices, it seems essential Anyconnect is already active... Please correct me?

    Active Firewall
    ===============

    System image file is "disk0: / asa825 - k8.bin.
    The configuration file to the startup was "startup-config '.

    Material: ASA5520, 2048 MB RAM, Pentium 4 Celeron 2000 MHz processor
    Internal ATA Compact Flash, 256 MB
    BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

    Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
    Start firmware: CN1000-MC-BOOT - 2.00
    SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
    Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

    0: Ext: GigabitEthernet0/0: the address is a493.4ca3.ce0a, irq 9
    1: Ext: GigabitEthernet0/1: the address is a493.4ca3.ce0b, irq 9
    2: Ext: GigabitEthernet0/2: the address is a493.4ca3.ce0c, irq 9
    3: Ext: GigabitEthernet0/3: the address is a493.4ca3.ce0d, irq 9
    4: Ext: Management0/0: the address is a493.4ca3.ce09, irq 11
    5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
    6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

    The devices allowed for this platform:
    The maximum physical Interfaces: unlimited
    VLAN maximum: 150
    Internal hosts: unlimited
    Failover: Active/active
    VPN - A: enabled
    VPN-3DES-AES: enabled
    Security contexts: 2
    GTP/GPRS: disabled
    SSL VPN peers: 2
    Total of the VPN peers: 750
    Sharing license: disabled
    AnyConnect for Mobile: disabled
    AnyConnect Cisco VPN phone: disabled
    AnyConnect Essentials: enabled
    Assessment of Advanced endpoint: disabled
    Proxy sessions for the UC phone: 2
    Total number of Sessions of Proxy UC: 2
    Botnet traffic filter: disabled

    This platform includes an ASA 5520 VPN Plus license.

    =====================================================

    Firewall standby
    ================

    Updated Saturday, May 20, 11 16:00 by manufacturers
    System image file is "disk0: / asa825 - k8.bin.
    The configuration file to the startup was "startup-config '.

    Material: ASA5520, 2048 MB RAM, Pentium 4 Celeron 2000 MHz processor
    Internal ATA Compact Flash, 256 MB
    BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

    Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
    Start firmware: CN1000-MC-BOOT - 2.00
    SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
    Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

    0: Ext: GigabitEthernet0/0: the address is 6073.5cab.3fae, irq 9
    1: Ext: GigabitEthernet0/1: the address is 6073.5cab.3faf, irq 9
    2: Ext: GigabitEthernet0/2: the address is 6073.5cab.3fb0, irq 9
    3: Ext: GigabitEthernet0/3: the address is 6073.5cab.3fb1, irq 9
    4: Ext: Management0/0: the address is 6073.5cab.3fb2, irq 11
    5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
    6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

    The devices allowed for this platform:
    The maximum physical Interfaces: unlimited
    VLAN maximum: 150
    Internal hosts: unlimited
    Failover: Active/active
    VPN - A: enabled
    VPN-3DES-AES: enabled
    Security contexts: 2
    GTP/GPRS: disabled
    SSL VPN peers: 2
    Total of the VPN peers: 750
    Sharing license: disabled
    AnyConnect for Mobile: disabled
    AnyConnect Cisco VPN phone: disabled
    AnyConnect Essentials: enabled
    Assessment of Advanced endpoint: disabled
    Proxy sessions for the UC phone: 2
    Total number of Sessions of Proxy UC: 2
    Botnet traffic filter: disabled

    This platform includes an ASA 5520 VPN Plus license.

    Thank you

    1 correct. You can run one or the other, but not both.

    2 since you have the upgrade memory to 2 GB, you should be fine perform web deployment via the pkg file method.

    3. for a 5520, you need:

    L-ASA-AC-E-5520 =
    L-ASA-AC-M-5520

    .. .to the Essentials and Mobile licenses respectively.

    4. on ASA 8.2, you need licenses for both units. If you upgrade to 8.3 + (8.4 (7) recommend at least), you can share licenses between members of a pair of HA. If you choose not to upgrade, just apply the key of activation on the rescue unit, then on the unit activates. You don't need to move on and in the failover configuration. Failover of the rescue unit status will show as ineligible briefly while he holds the new license is not the case of the active unit. Which will be resolved after you have applied the same license on the main unit. (If you were on 8.3 + would not happen at all).

    5. simply create a new connection profile for customers of Essentials by using the same AAA server group.

  • HA possibility of twinning? two ASA5520s, one with Anyconnect Essentials with Anyconnect more licenses - can these two equivalent license types HA pair successfully?

    I have two ASA5520s... we have 750 Anyconnect Essentials licenses and the other 750 Anyconnect more licenses.

    These can two successfully pair HA or I need to have both on the same exactly the type of license?  that is the two Anyconnect more...

    Thank you!

    HAL

    Hi hmcandrew,

    As far as I know, you need to require one of the ASA on the other to run in failover mode.

    Maybe if you run them in a private network virtual-balancing of the load in place, they will be able to work, but it will not give you HA.

    Please see the following link for more information:

    https://supportforums.Cisco.com/document/67701/ASA-versions-image-names-...

    Please rate if you find this information useful.

    Kind regards

    -Javier-

  • Install the client via a browser web w. ANyConnect Essentials license?

    I wonder if it is still possible for individual users install the AnyConnect client by authenticating is via a web browser and allow the web browser to launch the installation, even if the device that the user connects to is running in mode anyconnect essentials?

    In addition, a bonus question: If there are several groups of tunnel and I want the user to know the name of the tunnel group in order to connect (because I don't want to show which groups of tunnel are available), can I force a user to access a specific URL to connect to this group of specific tunnel? I did it with the premium version of the AnyConnect VPN in my lab, but still works for the most part? And what happens if the user starts the AnyConnect client and connects without using the web browser to open the VPN session? The AnyConnect client remember what tunnel group was finally to that specific device or what I have to show which groups of tunnel are available in the AnyConnect client to allow the user to reconnect to this group of specific tunnel?

    Oscar

    You can continue to launch web AnyConnect the Essentials installed with a license. In order to direct users to a particular group of tunnel without using an alias and drop-down, you can configure the group URL. For example, you have a tunnel group called employee and another contractor called. With the group URL, users can access the respective web portal by entering https://vpn.test.com/employee or https://vpn.test.com/contractor. For users who already have the AnyConnect client installed, you can either insert the group above url in the connection box, or you can configure a host name address and the host by using a profile.

  • 5505 Anyconnect essentials of license details please

    Have a 'base' 5505 with the upgrade of 50 internal guests.

    I just added the ASA-AC-E-5505 25 Anyconnecr Essentials license key to this unit.

    Show version now shows active Anyconnect Essentials, but the "total peer VPN" is always 10.

    Am I not able to have 25 Anyconnect customer to connect to my network? or am I limited to 10?

    I've read many threads, but just more confused.

    Thank you

    DWNewman

    Hi Dennis,

    If anyconnect essentials is enabled, then we can log 25 users.

    Run the command " sh vpn-sessiondb license-summary" "yshow your vpn-sessiondb". "" It will show you the number of users anyconnect you can connect.

    Kind regards

    NGO

  • Cisco Anyconnect Essentials License - What is it

    Hello community.

    I managed to install an ASA with Anyconnect. The Anyconnect client on my laptop works very well.

    But why now to buy a Cisco Anyconnect Essentials License, what exactly is this license?

    AnyConnect works fine without this license.

    But I can not connect with my IPhone with the Cisco Anyconnect for Iphone App. should I buy the Anyconnect for Mobile license and this license just for a single device or all devices. Because this license is really cheap. Cisco licenses normally are expensiv.

    Thank you and best regards patrick

    If you have not all AnyConnect Premium licenses, then you are limited to two simultaneous connections if you do not have the license of anyConnect Essentials. You are right, for i-devices (and Android...) you need the AnyConnect Mobile license.

    AnyConnect Essentials both AnyConnect Mobile are approved by ASA, not user connections. And AnyConnect Mobile needs AnyConnect essential or Preimium AnyConnect license must be activated.

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • NAC and ASA AnyConnect Essentials

    If you have the Essentials AnyConnect VPN license - the ASA is able to do all of the NAC such as searching the registry value or check his firewall definitions are up-to-date?  Thank you.

    With an AnyConnect Essentials license is activated, without client feature WebVPN, Cisco Secure Desktop (CSD) and assessment of Advanced endpoint is disabled.  For this reason, you won't be able to make the registry checks, check the antivirus updates, etc..

  • License AnyConnect SSL - increase in the number of users

    I have an ASA 5510 with SSL 100 users license. I'll add additional VPN users - how can I go on the increase in the number of authorized users? Can I buy a license 50 users and they will combine (to 150 users)? Or I have to jump up to 250 users?

    I contacted Cisco and got two different answers (see above). If anyone has a part number, it would be great.

    Thank you

    Greg

    Hi Greg -.

    The next bump in licensing for Anyconnect Essentials is the number of users of 250 max (L-ASA-AC-E-5510 =). If you run Anyconnect Premium is more gradual. Here are the part numbers and user account for Premium evasion.

  • AnyConnect Essentials - HTTPS

    Hi all

    After you have enabled Anyconnect essentials (clientless disable), can I still access my internal resources using HTTPS? (IE https://host1.company.com - using anyconnect client anyconnect Essentials active).

    Thank you

    No, not at all!

    With AnyConnect, you use your client installed locally to get seamless access to your internal resources. With the portal Clientless ASA is a proxy for all your requests.

    The two have different use cases. For your company-managed computers, the AnyCOnnect client is normally used. Clientless is used if you want to connect from an unmanaged PC where you cannot or do not want to install a client for seamless access.

    For example, you are in the jungle and want to access some resources from a local Internet café. Then, you would use without VPN client. But if you find a hotspot and have your mobile with you, you take the AnyConnect client.

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • Cisco ASA 8.2 - anyconnect essentials

    Experts

    I need activate command anyconnect essentials in my configuration for webvpn.

    When I do not show performance webvpn, I see:

    No anyconnect essentials.

    If I go to webvpn:

    (config-webvpn) anyconnect essentials (then press enter) I get this error message:

    Clientless currently active sessions: 3

    After all without client sessions are disconnected, manually activate Anyconnect Essentials by using ASDM or "anyconnect-essentials" CLI under webvpn mode.

    For some reason Java is dead and I can't run ASDM.

    How do I disconnect the Clientless CLI sessions in order to add the command

    "anyconnect essentials".

    Thanks for your help!

    vpn-sessiondb logoff ....

  • AnyConnect essentials web deployment

    If you have an ASA, with only two built in full webvpn licenses and as 100 essential anyconnect licenses, the anyconnect client still deployable via the web, or if these two complete webvpn sessions are in use it will not connect on the portal?

    Correct essential AnyConnect and AnyConnect Premium can coexist.

    The whole point of essential AnyConnect is the replacement for IPSec VPN Client because both are complete tunnel mode, therefore, the license is cheaper than the AnyConnect Premium license.

  • Issue of license AnyConnect

    Hello

    I have a standard contract of SMARTNET 8 x 5 for an ASA5505 so I'm able to download ASA & ASDM updates etc.. Do I need a rider SMARTNET access/download AnyConnect update software/customers or I'll be good to go with what I already have?

    Thank you.

    Yes, absolutely 100% legal, as it is supplied with 2 default AnyConnect license on all models of the ASA.

    If you check the output of 'see the version' you will see that you have the license 2 default for AnyConnect (or he can say SSL depending on what version you currently have). AnyConnect support, you will need to run version 8.x.

  • Lightroon 6 license need disabled

    At my old computer self-destruction and cannot go on, launch LR6 and disable it.

    Technical support information for Adobe said that I need to call Adobe and disabled it manually by their support team.

    However, Adobe seems to be on the brink of financial collapse and disconnected their phones.

    With no way to call, nobody knows how to contact to have my disabled LR6 so that I can load on my new computer?

    Hi Carolb916,

    Please contact our support Chat using disabling team, as support for perpetual license option is Chat only, see What are my options contact?

    Please click here for Contact customer service.

    See also,

    Help FAQ: How do I contact Adobe for support?

    Contact the technical support FAQ: Impossible to reach support via the link "contact us".

  • License to disable

    Hello

    I can't 'Turn off' the license on the computer.

    Why is this option in gray? THX.

    Best regards.1.PNG

    Hi itchampitteti97113022,

    Do you have volume for Acrobat XI licenses? If Yes, then you won't have the ability to disable in the Help menu.

    If its an individual installation fix installation under the menu help.

    Restart Acrobat XI & then try to turn it off.

    Kind regards
    Nicos

Maybe you are looking for

  • S5-1110 USB 3.0 Installation of the card

    I have to add a USB 3.0 to the slimline cases.  There are 3 PCIe 1 x slots.  However, it should be compact and entitled to it.  Can what cards I use? How do we get power it with the custom PS he uses? Isn't a non-motorized card and options. Thank you

  • Kaspersky anti virus

    I am download Kaspersky anti virus on my computer.  It doesn't let me download it.  The error message says something about the signing of data.  I contacted Kaspersky and they tried everything and it doesn't work.  They recommended that I contacted m

  • undeliverable mail - I can't send or receive email

    I can't send or receive email now, I have windows Vista Home Basic. I have internet explore and he only tells me no http messaging now. So now what? David StClair

  • COMPORT CONNECTION

    I NEED TO HAVE A USB PORT IS OPENED AS A CONNECTION COMPORT

  • Bulding error with BlackBerry JDE project

    Hello I tried to create my application on BlackBerry JDE 5.0, and she's still fails with the following message is displayed: SimpleUI buildingC:\Program Research In Motion\BlackBerry JDE 5.0.0\bin\rapc.exe codename = SimpleUI SimpleUI.rapc warnkey =