LICENSE of BOTNET in ASA

Similar Questions

• ASA with the power of fire, no need for the license of botnet?

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.     Cheers - more to see: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  See you soon

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  Double - answered in the other display.

• License of IPSec Cisco ASA

  Dear all,

  I want to know how much maximum IPSec connection allowed in my Cisco ASA 5505.

  I want to try VPN L2TP Mac and PC

  TQ

  The devices allowed for this platform:
  The maximum physical Interfaces: 8 perpetual
  VLAN: 20 unrestricted DMZ
  Double ISP: Activated perpetual
  VLAN Trunk Ports: 8 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active / standby perpetual
  Encryption - A: enabled perpetual
  AES-3DES-Encryption: activated perpetual
  AnyConnect Premium peer: 25 perpetual
  AnyConnect Essentials: 25 perpetual
  Counterparts in other VPNS: 25 perpetual
  Total VPN counterparts: 25 perpetual
  Shared license: activated perpetual
  AnyConnect for Mobile: activated perpetual
  AnyConnect VPN phone Cisco: activated perpetual
  Assessment of Advanced endpoint: activated perpetual
  Proxy UC phone sessions: 24 perpetual
  Proxy total UC sessions: 24 perpetual
  Botnet traffic filter: activated perpetual
  Intercompany Media Engine: Disabled perpetual
  Cluster: Disabled perpetual

  With this device you can have 25 concurrent VPN sessions, regardless of the type.

• AnyConnect user more perpetual license can share several ASA?

  Dear all my friend.

  Need help :)

  If I order ' Cisco AnyConnect 50 user more perpetual license ", SKU 'AC-PLS-P-50-S '.

  Can I use this 15 license in ASA, ASA B 15 users and 30 users in ASA C?

  is this similar with license for Collaboration, got PAK, and we can use partial licenses to any machine?

  You can use it in several ASAs. However the total number of unique users must not exceed the number of licenses.

  Your example request 15 + 15 + 30 = 60. 60 > 50 so you'd be in violation of the license.

• Help license SSL Info failover ASA 8.2 8.3

  Hello

  I have a question about lincense.

  I have a 8.2 in HA cluster, active failover.

  I bought 100 VPN SSL lic 4 months ago for ASA active and ensures 100 lic for ASA in mode.

  So on each firewall there is a lic for 100 SSL VPN.

  If I switch to 8.3 the ICA became 200 or even 100 assets and 100 for emergency unit?

  because I've read in this doc

  http://www.Cisco.com/en/us/docs/security/ASA/asa83/license_standalone/license_management/license.html#wp1428452

  Here "How failover Licenses combine" that there is the possibility that the linces can became a lincense cluster.

  Can you help me? Is there someone who try this feature?

  Thank you very much.

  Yes, you are absolutely right. With version 8.3, the license will be mixed, and you'll have 200 user license to use. But please please be advised that for example if you have 500 user license on each, with a combined of 1000 user license, and the ASA platform only supports the 750 user license, you are limited to the user license only 750.

  PS: If you want to upgrade to version 8.3, please check changes of NAT and ACLs. NAT changed completely with the concept of double NAT and NAT object network.

  Hope that answers your question.

• licenses for a cisco ASA active/passive pair AnyConnect SSL

  Hi all. I buy 2 5512 x ASAs is configured like a pair of active/passive as a VPN device. I need to purchase licenses for both devices anyconnect? Thank you

  Licenses AnyConnect Essentials (or premium) are combined on a cluster failover ASA. Reference

  So, buy once only the quantity and type of licenses you need based on your end users - not based on the number of ASAs - and they will be available at the ASA Active whether primary or secondary unit.

• Is it possible to withdraw a license installed previously on ASA?

  Hi all

  I am currently reconfigure a HA Setup with a second 5510 ASA5510 installation.

  The old 5510 has a license 'AnyConnect for Mobile' which is not used. If we improve this SecPlus license to allow failover posibilities and we bought a new 5510 also with SecPlus license. When I try to activate the failover, I get the message that my companion did not license «AnyConnect for Mobile»

  I know for failover, both devices must be exactly the same (at first I thougth that the AnyConnect license would be lost when SecPlus). So now I'm wondering and seeking solutions remove the AnyConnect license (because we do not use it).

  Anyone got a clue?

  Regards and thanks in advance for your efforts!

  Daniel Lange

  The only thing you could do is remove the activation key and a key that does not allow the Anyconnect.

  Not sure if you can get a licence, but you can try.

  PK

• License problem of security context for Cisco ASA 5585

  Hello

  Can someone help me in license number for the ASA 5585 security environment,

  We recently purchased a box ASA (5585) which has 2 default security context and we had like to have context for this ASA 25 permit and we got two codes PAK of Cisco for 20 licenses and 5 respectively.

  When we generate the license key by combining the two codes Portal Cisco PAK and apply the same on ASA, do not see the 25; Instead, it shows only 20.

  Is it really possible to stack context like 20 + 5 licenses or to buy a PAK code for any license 25 context?

  Please advise me on this.

  Thanks in advance!

  Kind regards

  Kam

  Hello

  This should probably not be handled with Cisco directly or through the company that got you the license.

  To my knowledge, there is a possibility that the you have everything first to install a license key and the other licence could be upgraded from the previous license until the following limit of function under license.

  I had several occasions where I was provided with the wrong license and had to communicate with Cisco/provider to get licenses appropriate for my device.

  While I was announcing this response I checked the document of licensing for ASA models. It seems to me that there is no security content license 25 for the SAA. The deadline is 20 and license of SC 50 SC

  Check this document:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/intro_license.html#wp1230400

  -Jouni

• Same license for different ASA SSL VPN

  Hello

  I have run ASA5510 SSL VPN is installed with a license. I want to replace it with the new ASA5510 without SSL VPN license. Is it possible to copy the license from my old ASA? Can I order different license for my new box?

  THX

  Iwan

  A new license is required.

  License key is created based off the serial number of the device.

  Gilbert

  -Rate, if it helps-

• LICENSE OF ASA

  I need to KNOW for the firewall of the firepower of ASA for the Site to site VPN sessions or client sessions vpn site need no license.

  The ASA 5516 X (with or without fire power module) is fully approved for IPsec site-to-site VPN until the capacity of the equipment (300 for this platform).

  "customer site" or to speak (if SSL or IPsec IKEv2) VPN remote access, require licenses AnyConnect. There are 2 Premium / Apex licenses included with all the ASAs which are there mainly to test the feature.

  If you want to set up for multiple users, you can buy AnyConnect. Currently, it is available in two versions - more and Apex. More is a base of remote access VPN and the client must be installed on the end user's computer. Apex is the top version with many more advanced features and may possibly be used to configure clientless SSL VPN by which the end user only needs a browser.

  Visit the AnyConnect product information pages for many more details.

• 2 licenses of anyconnect ASA

  Hello

  I know that I asked this question once, but I need to make sure, please help me.

  If I have two ASA-5545-x and I want to buy a license appex for 1000 users, should I order

  licenses of two 1 k, I want to say can I just order a separate license for each of the ASA devices or

  a 1 k license is sufficient.

  Thanks for the reply.

  A single license is enough. Part number L - AC - APX-[1, 3, or 5] year - G with sub-line items specifying the number of licenses.

  Also, with the new model license AnyConnect 4.x, you can exchange the PAKs on several serial numbers ASA as licensing by using network ASA head.

• ASA 5500 x new anyconnect VPN license structure

  I wonder if anyone can give me some insight on the new ASA VPN (SSL VPN) structure of license.  Currently, I have anyconnect premium license installed on the ASA 5500 series but want to buy the same type of license for x ASA 5500 series.  I understand the premium license is required for SSL VPN and webvpn.  Can someone find out if the premium anyconnect and anyconnect essentials license has been replaced by the Cisco Anyconnect Apex licence?

  The new AnyConnect Apex maps old Premium licenses. They are now focused on the term (1, 3-5 years) and have been approved by a single user (regardless of the number of devices) vs. concurrent users on the old regime.

  Apex (or the old premium) is required for clientless SSL VPN. Regular-based on the SSL VPN client AnyConnect requires no Apex but can be done by using only more licenses.

  The new AnyConnect Plus is the old Essentials plus mobile licenses. There is an option of perpetual and based on the duration.

  By single user licensing is a terms and conditions / EULA stuff and not enforced by technical means at the moment.

• To activate SSL license on cisco ASA

  Hello

  I ordered ASA with 50 ssl licneses.

  But due to the avialibilty of the product it shipping for me.

  I was delivered with the ASA with basic license is to say ASA - Bun - like SSL license K8.Then will take some time I was given a temporary license/activation key.

  Can someone let me know how to enable these licenses to begin work on SSL. My camera isn't in production right now.

  I will get permanent license in 3-4 weeks and still once I need it at this time here for the new license.

  Hope that the procedure would be more or less the same.

  Please guide.

  Reg,

  Sushil

  Sushil

  Check out this doc and come back if you have any other questions.

  Activation of licence ASA

  Jon

• Cisco Anyconnect/WebVPN license for ASA 5510

  Hello

  Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.

  You are welcome.

  1 Yes

  2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.

  Here is a document TAC on the Java questions if you want more details.

  Please take a moment to note the useful messages and mark your answers questions.

• ASA 5500 SSL VPN Failover license

  Hello

  I have a partner who request assistance with SSL VPN licenses on the ASA 5500 firewall sharing:

  His question is:

  Both SSL, provided with the firewall of the SAA, licenses can be shared across a couple active / standby?  I would therefore have a total of (4) licenses of SSL VPN to use?

  This would also be true for two security contexts that are included with the firewall?

  For example, I buy two base ASA 5520 firewall, running active / standby, that each machine is supplied with SSL VPN licenses (2) and (2) licensing of security contexts? In version 8.3, the licenses are cumulative by failover pairs, so I should a total SSL VPN (4) and (4) security contexts?

  Here is my response to his request:

  Based on this link (http://www.cisco.com/en/US/partner/docs/security/asa/asa83/license_standalone/license_management/license.html#wp1449664)

  It was mentioned that:

  "You can have one active license type, either the AnyConnect Essentials license or the AnyConnect Premium license. By default, the Adaptive security apparatus includes an AnyConnect Premium license for 2 sessions. If you install the AnyConnect Essentials license, it is used by default. See not anyconnect-essentials control or in ASDM Configuration > remote access VPN > network (Client) access > advanced > component AnyConnect Essentials to activate the Premium license instead. »

  It will be able to share the included license on the ASA 5500 4. It will be able to share these licenses, but I'm not sure the security context. My answer would be, it can use only 2 context Security licenses since only the VPN licenses are shared on the version 8.3 and other licenses not characteristic. My understanding is correct? or there are other explanations on my customer survey?

  Thanks in advance!

  Ice Flancia

  Cisco partner Helpline Tier 2 team

  Only from ASA 8.3 version and following, the license can be combined on a failover pair active / standby.

  2 SSL included license on SAA in failover pair is combined as 4 license SSL.

  2 license of background on ASA in failover pair is combined as license frame 4.

  Here's the URL on ASA combined license failover:

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa83/license_standalone/license_management/license.html#wp1450094

  Hope that helps.