licenses for a cisco ASA active/passive pair AnyConnect SSL
Hi all. I buy 2 5512 x ASAs is configured like a pair of active/passive as a VPN device. I need to purchase licenses for both devices anyconnect? Thank you
Licenses AnyConnect Essentials (or premium) are combined on a cluster failover ASA. Reference
So, buy once only the quantity and type of licenses you need based on your end users - not based on the number of ASAs - and they will be available at the ASA Active whether primary or secondary unit.
Tags: Cisco Security
Similar Questions
-
Dear all,
I want to know how much maximum IPSec connection allowed in my Cisco ASA 5505.
I want to try VPN L2TP Mac and PC
TQ
The devices allowed for this platform:
The maximum physical Interfaces: 8 perpetual
VLAN: 20 unrestricted DMZ
Double ISP: Activated perpetual
VLAN Trunk Ports: 8 perpetual
Guests of the Interior: perpetual unlimited
Failover: Active / standby perpetual
Encryption - A: enabled perpetual
AES-3DES-Encryption: activated perpetual
AnyConnect Premium peer: 25 perpetual
AnyConnect Essentials: 25 perpetual
Counterparts in other VPNS: 25 perpetual
Total VPN counterparts: 25 perpetual
Shared license: activated perpetual
AnyConnect for Mobile: activated perpetual
AnyConnect VPN phone Cisco: activated perpetual
Assessment of Advanced endpoint: activated perpetual
Proxy UC phone sessions: 24 perpetual
Proxy total UC sessions: 24 perpetual
Botnet traffic filter: activated perpetual
Intercompany Media Engine: Disabled perpetual
Cluster: Disabled perpetualWith this device you can have 25 concurrent VPN sessions, regardless of the type.
-
Cisco asa active multiple interfaces on a single switch without configuration of vlan switch.
I was wondering if there is a work around on cisco asa to have 2 interfaces vlan on a switch. The reason I ask I have a cisco asa 5505 and a dell switch that does not support the configuration of VLANs. I set up 2 interface vlan on a cisco asa and when two interfaces are active my internet drops frequently. I was wondering if there is nothing to configure the asa cisco to make this thing work. Thanks in advance...
Assuming that Dell switch at least linking several interfaces of the ASA to the Dell should translate all media spanning tree protocols, but a bet covering the tree blocking State to avoid a tree covering loop.
If the Dell does not support tree covering weight then you would be in very bad shape each broadcast packet would be will loop indefinitely and cause what we call a 'broadcast storm. "
One way is not good and the other real harm.
-
Cisco ASA 8.0.4 AnyConnect works do not with Vista and IE7
Hello
I currently have a Cisco ASA 5520 with the latest version of the Software ASA/AMPS/Anyconnect. However I can't get Vista and IE7 to connect using the free client anyconnect VPN error message following appears
"Setup could not start the Cisco VPN Client".
Is there a workaround for this.
Thanks in advance
Eoin
I'm glad you got it working :)
Please evaluate the positions if find you them useful.
Concerning
Farrukh
-
Cisco ASA active / standby Mac addresses
Hi all
Please advise on the underside.
Say that I have to active / standby. I have two interfaces on each firewall configured as below
For the primary (active)
interface GigabitEthernet1 / 0--> Say burned in mac address is 6c41.6bb0.1111
nameif test1
security-level 0
10.1.1.1 IP address 255.255.255.0 ensures 10.1.1.2im int 2/0
Test2 nameif--> Say burned in mac address is 6c41.6aa0.1111
security-level 0
10.2.1.1 IP address 255.255.255.0 ensures 10.2.1.2For secondary school (currently idle)
interface GigabitEthernet1 / 0--> Say burned in mac address is 6c41.6bb0.2222
nameif test1
security-level 0
10.1.1.1 IP address 255.255.255.0 ensures 10.1.1.2im int 2/0
Test2 nameif--> Say burned in mac address is 6c41.6aa0.2222
security-level 0
10.2.1.1 IP address 255.255.255.0 ensures 10.2.1.2According to my understanding of the DOC.
To transfer traffic, other devices will use the main unit mac address and IP addresses.
Please consider under the scenario:
My primary unit has failed and secondary took over as active unit.
Primary (standby)
Secondary (active)
secondary Q1) so now will use the IP address and Mac address as below? Please confirm
10.1.1.1 & 6c41.6bb0.1111
10.2.1.1 & 6c41.6aa0.1111
Q2) I believe that the ip address of the primary (Standby) in aid will be
10.1.1.2
10.2.1.2
It will use what mac addresses? What is the BIA of the secondary unit? Please notify
Thanks in advance.
Q1 Yes), IP address and the MAC will be moving to the new active unit so no matter who the network except the switch will notice failover event
Q2) Yes, primary (watch now) will use IP addresses and MAC addresses available for secondary:
6C41.6bb0.2222
6C41.6aa0.2222
Kind regards.
-
We are upgrading Cisco ASA VPN HA pair 9.5.1
We will lose the sessions/connections VPN?
This is what happens when you do not have state synchronization. Maybe you would like to enable for your next update.
-
Error message 5545 ASA Cisco: % ASA-3-210007: READ allocate xlate failed
Hello team,
We have 2 firewall Cisco ASA, active failover / standby.
the waiting for firewall, we see this error message "% ASA-3-210007: READ allocate xlate failed.
This error message is related to the bug?
Thank you for your help,
Best regards
Yunus Saleh
Hi Younous,
This error on the rescue unit could be associated with a problem of memory on the device or memory full on the device.
IF these options are not confirmed, we can consider that your devices version is bug hit.
https://Tools.Cisco.com/bugsearch/bug/CSCub94479/?referring_site=bugquic...
BTW, you send us the "sh version" of your device.
If your version is 'old' or connected to the version mentioned in the BUG system, is high suggests updating your device.
In a law/stb Setup, are also "0 downtime" and updated easy both devices
Let me know
Matteo
Please rate me if the post was beneficial for your solution / questions
-
Licenses, IPS on pair of Cisco ASA 5510 active / standby
I have two ASA 5510 devices in Active mode / standby. I think of buying both used IPS modules and their installation. My question is, me 1 or 2 licenses IPS that requires? We are on 8.4 right now, and I see 8.3 Cisco changed license to c/o to where you need only one license, not two. This is true for any way VPN licenses, so I was wondering if the same applies to licenses IPS.
In addition, the unique licensing model will as much as only requiring a base for the pair a/s license too? Or is the base license, something that you must have two pair a/s?
Failover doesn't f, you have only one module in the ASA elementary school. You must have two modules. But it is fine if you do not have a subscription license for your secondary IPS (at least for the system).
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
All necessary licenses on ASA 5510 for old Cisco VPN Client
We're trying to migrate our firewall Watchguard to a Cisco ASA 5510, who bought some time ago. For some reason, all of our users have already installed the old Cisco VPN client. I think it will work. Are there licensing issues on the 5510 I had to be concerned with? No matter what special config that needs to be done on the 5510?
Fix. You don't require licensing of AnyConnect of any type of configuration and the use of IKEv1 IPsec remote access VPN (which use the old Cisco VPN client).
You will be limited to 250 active IPsec peers (remote access more no matter what VPN site-to-site) by the platform (hardware) device capabilities that are enforced by the software.
-
License problem of security context for Cisco ASA 5585
Hello
Can someone help me in license number for the ASA 5585 security environment,
We recently purchased a box ASA (5585) which has 2 default security context and we had like to have context for this ASA 25 permit and we got two codes PAK of Cisco for 20 licenses and 5 respectively.
When we generate the license key by combining the two codes Portal Cisco PAK and apply the same on ASA, do not see the 25; Instead, it shows only 20.
Is it really possible to stack context like 20 + 5 licenses or to buy a PAK code for any license 25 context?
Please advise me on this.
Thanks in advance!
Kind regards
Kam
Hello
This should probably not be handled with Cisco directly or through the company that got you the license.
To my knowledge, there is a possibility that the you have everything first to install a license key and the other licence could be upgraded from the previous license until the following limit of function under license.
I had several occasions where I was provided with the wrong license and had to communicate with Cisco/provider to get licenses appropriate for my device.
While I was announcing this response I checked the document of licensing for ASA models. It seems to me that there is no security content license 25 for the SAA. The deadline is 20 and license of SC 50 SC
Check this document:
http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/intro_license.html#wp1230400
-Jouni
-
IPS modules in the ASA config for active/passive failover
Hey guys,.
We have two ASA in a situation of active/passive failover each with a module AIP-SSM-20 IPS.
These modules are intended to synchronize their configs like the ASA do? Alternatively, they each have a separate entity and each need to be configured separately?
Thanks for any help!
Each will have their own IP address, and each must be configured separately.
They will not communicate with each other and share no configuration.
You will need to make sure the config is changed in one of the other.
Monitoring station pull events from two sensors.
The SSMs rely on the SAA for the TCP state tracking so they will work very well in a design of failover ASA.
-
Cisco Anyconnect/WebVPN license for ASA 5510
Hello
Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.
You are welcome.
1 Yes
2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.
Here is a document TAC on the Java questions if you want more details.
Please take a moment to note the useful messages and mark your answers questions.
-
Cisco ASA 5510 + license + AIP - SSM
Hello.
I have this box.
I have a few questions about it.
(1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?
(2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?
(3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?
(4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?
Please help me.
(1) you must Smartnet in order to download the software from the download from cisco.com site.
(2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.
(3) Yes, the basic license is OK for the AIP module.
(4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.
Hope that answers your questions.
-
Add the date of activation of the system of detention of intrusions and Cisco ASA FirePOWER
Good evening
I want to add detention system intrusions to Cisco ASA FirePOWER license (with I.P.S, protection MPAs., Apps and URL). Is possible that? I have to buy another license or only (not free) upgrade?
the start date of the firepower Cisco ASA license-protection starts from the purchase date or from date of activation/installation on router ASA5506-X?
Hi again, my responses below:
(3) the L-ASA5506W-TAMÁS = is the correct part number if you are looking to get the model of 5506-X Wireless ASA. Don't know why ours (CDW) site has not listed :) However, we have listed promotional SKU: L-ASA5506WTAMC-1PR. For more information, I suggest that join you your CDW account manager. If you are not a customer CDW then I would suggest that you contact your local Cisco partner dealer
(4) here's the datasheet FireSIGHT:
The device can be virtual or physical
5.1) IOS-base-2960 - I'm not sure I understand the question. Can you elaborate a bit more on what you're asking here?
5.2) I.D.S. requires no additional licenses. It is part of the solution if you buy above subscriptions. The main difference here is that IPS (Intrusion Prevention System) is deployed in line and he will drop the traffic/connections if a malicious activity is detected. IDS (Intrusion Detection System) is monitor only. Thus, if the malicious traffic is detected, firepower will alert you to this topic but he will drop all traffic.
3DES/5,3) AES will be included at the time of the references you listed.
Thank you for evaluating useful messages!
-
Problem with the VPN site to site for the two cisco asa 5505
Starting with cisco asa. I wanted to do a vpn site-to site of cisco. I need help. I can't ping from site A to site B and vice versa.
Cisco Config asa1
interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 172.xxx.xx.4 255.255.240.0
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.60.2 255.255.255.0
!
passive FTP mode
network of the Lan_Outside object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
Access extensive list ip 192.168.60.0 Outside_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_2 of object-group a
network of the Lan_Outside object
NAT (inside, outside) interface dynamic dns
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 172.110.xx.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.60.0 255.255.255.0 inside
http 96.xx.xx.222 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 96.88.75.222
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
inside access managementdhcpd address 192.168.60.50 - 192.168.60.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_96.xx.xx.222 group strategy
attributes of Group Policy GroupPolicy_96.xx.xx.222
VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 96.xx.xx.222 type ipsec-l2l
tunnel-group 96.xx.xx.222 General-attributes
Group - default policy - GroupPolicy_96.xx.xx.222
96.XX.XX.222 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cisco ASA 2 config
interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 96.xx.xx.222 255.255.255.248
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.1.254 255.255.255.0
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the Lan_Outside object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_4
ip protocol object
icmp protocol object
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_2 of object-group 192.168.1.0 255.255.255.0 192.168.60.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_4 of object-group a
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.60.0_24 NETWORK_OBJ_192.168.60.0_24 non-proxy-arp-search of route static destination
!
network of the Lan_Outside object
dynamic NAT (all, outside) interface
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 96.xx.xx.217 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 172.xxx.xx.4 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 172.110.74.4
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0dhcpd address 192.168.1.50 - 192.168.1.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_172.xxx.xx.4 group strategy
attributes of Group Policy GroupPolicy_172.xxx.xx.4
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 172.xxx.xx.4 type ipsec-l2l
tunnel-group 172.xxx.xx.4 General-attributes
Group - default policy - GroupPolicy_172.xxx.xx.4
172.xxx.XX.4 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
inspect the httpFor IKEv2 configuration: (example config, you can change to encryption, group,...)
-You must add the declaration of exemption nat (see previous answer).
-set your encryption domain ACLs:
access-list-TRAFFIC IPSEC allowed extended LOCAL REMOTE - LAN LAN ip
-Set the Phase 1:
Crypto ikev2 allow outside
IKEv2 crypto policy 10
3des encryption
the sha md5 integrity
Group 5
FRP sha
second life 86400-Set the Phase 2:
Crypto ipsec ikev2 ipsec IKEV2-PROPOSAL
Esp aes encryption protocol
Esp integrity sha-1 protocol-set the Group of tunnel
tunnel-group REMOTE-PUBLIC-IP type ipsec-l2l
REMOTE-PUBLIC-IP tunnel-group ipsec-attributes
IKEv2 authentication remote pre-shared-key cisco123
IKEv2 authentication local pre-shared-key cisco123-Define the encryption card
address for correspondence CRYPTOMAP 10 - TRAFFIC IPSEC crypto map
card crypto CRYPTOMAP 10 peer set REMOTE-PUBLIC-IP
card crypto CRYPTOMAP 10 set ipsec ikev2-IKEV2-PROPOSAL
CRYPTOMAP interface card crypto outside
crypto isakmp identity addressOn your config, you have all these commands but on your VPN config, you mix ikev1 and ikev2. You have also defined political different ikev2. Just do a bit of cleaning and reached agreement on a 1 strategy for the two site (encryption, hash,...)
Thank you
Maybe you are looking for
-
Change of credit card deductions
I am from Pakistan. I just change my credit card information and for whom I had 1 USD charged twice within 2 minutes.When I haven't bought anything, why me is she charged in the first place and who has also twice?
-
the extended keyboard, iPad Pro disappeared and I would like to know how to get it back.
One of the things I liked on my new iPad Pro was the extended virtual keyboard. The iPad virtual keyboard Pro has disappeared and now I only have the keyboard virtual iPad ordinary. I have updated to iOS 9.3 to see if the previous virtual keyboard wo
-
Satellite L300 - driver Open Webcam fail on Windows XP
I know this is a common problem, I've been on this forum for days and found no solution. I have a satellite L300 PSLB8E, I lowered from VISTA to windows XP. I downloaded the drivers from your Web site, camera Assistant, but he says failure of webcam
-
Error 0xBFFF800B to the MAX with firewire cameras
Hello MAX lists all cameras connected by FireWire. But when I click on one to show configuration, MAX is held for several seconds, and then it brings a dialog: Error 0xBFFF800B The session for your device could not be configured The camera will now a
-
OfficeJet Pro 8620: Officejet Pro 8620 won't copy. Tried the hard reset suggested in the forum.
Won't copy even if she looks like her do something. Error message reported that incorrect paper size has been used. All other functions seem fine. Just bought.