LifeCam 5000 stopped working
My microsoft lifecam vx5000 mysteriously stopped working last week.
Lights to LED and the microphone works, but it does not send a picture.
I reinstalled the drivers about 1,000 times, I am at a loss.
Hello
Maybe the camera has developed a hardware problem.
LifeCam VX-5000 - 3 year warranty
http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=014&active_tab=systemRequirements
Microsoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspx
Support for WebCam
http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
Hardware support of MS and warranty claims
1-800-936-5700
I hope this helps.
Tags: Windows
Similar Questions
-
Microsoft Lifecam has stopped working
So I bought myself a new Lifecam yesterday, and it worked very well, no drama at all.
However, this morning when I booted the computer, I ran an update to it, and it has not worked since. It may work on messenger and Skype, but whenever I try to open the file, it comes up as "Lifecam.exe has stopped working". He then tells me to restart my computer, like this should solve the problem. However, it doesn't.
I tried uninstalling and reinstalling, but I always get the same question.
Help is very appreciated.
Hello
Step 1: Uninstall Lifecam driver and software and install them in the clean boot state.
Put your boot system helps determine if third-party applications or startup items are causing the problem.
Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. Click Start.
(b) in the search box type eventvwr.msc, and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer -
Microsoft LifeCam suddenly stopped working, has error Code 43
I have been using an external camera from Microsoft "Microsoft LifeCam" on my Toshiba 305 and suddenly it has stopped working & and/or is therefore most recognizable when it is plugged. Any suggestions on how to put it on again. The camera that came with this Toshiba 305 is very grainy and looks like maybe the goal was scratched and does not have a good video image and the external camera did a great job for me with this laptop.
One of the "warnings" or troubleshooting of the menus said the following:
Intel (R) 82801 G (ICH7 Family) USB2 Enhanced Host Controller
Windows has stopped this device because of problems (Code 43)
Help! and thank you Bill in Chicago!
Hello Bill,
Thanks for posting your question on the Microsoft Community forum.
I apologize for the inconvenience caused to you.
I understand that you have a problem with Microsoft life camera stopped working in the system and get the error 43.
This issue would have occurred because drivers have been corrupted in the system.
I would suggest trying the following methods and check if it helps.
Method 1:
Error codes in Windows, Device Manager please follow the steps in the link provided and check if it helps.
http://support.Microsoft.com/kb/310123
If the problem persists, please follow method 2.
Method 2:
Code 43: Windows has stopped this device because it has reported problems, please follow the steps in the link provided below.
http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx
If the problem persists, follow method 3.
Method 3:
Troubleshooting for the failures to find the new LifeCam hardware, please follow the steps in the link provided below and check if it helps.
http://support.Microsoft.com/kb/929087
Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
For reference:
Please refer to the procedure described in the article below.
Troubleshooting: Webcams
http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup
Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.
Thank you.
-
LifeCam Cinema stops working after a while
-Very well, so I have the camera is plugged in and its detected with the drivers installed and so on. When I start using it, it will work for a good 5 to 10 minutes then stop working and the computer unplug chim will ring and his is no longer detected by my computer for an hour or so he comes back...
I'm using windows 7 64 x an idea?Hello
(1) don't you make changes to the computer until the problem occurred?
I suggest you to follow the steps below and check if it helps:
Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.
Follow the link below a convenience store opened.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
I suggest to return the item and try to run the troubleshooter and check if it helps.
Tips for solving common driver problems:
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
See also:
Automatically get recommended drivers and updates for your hardware:
Hope this information is useful.
-
Microsoft lifecam 3000 stops working
I recently bought a microsoft lifecam 3000 and when I use the camera it work until the microphone lights up and then a shrill sounds begins and the person I'm talking about does not hear me. I have tried everything I can think of why it is doing this? Help.
I plan to take back and get one that actually works.
Hello
I suggest you try to update the latest drivers and software for the lifecam and check if it helps, here is the link:
http://support.Microsoft.com/kb/929087
Also check out this link:
http://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
Check if that helps.
-
Hi here is my setup:
Laptop: graphic Driver HP TM2-2000el, OS Windows 8 Pro, ATI Mobility Radeon HD 5000 series.
Problem: When I've upgraded to Windows 8, the ATI graphics driver has stopped working, actually it works with the intel HD built in driver. In fact, I can't send the HDMI signal to my TV. I downloaded the last Catalyst AMD released on April 24, 2013, the regular and the beta version, but do not work. On the Device Manager error code 10 (impossible to boot the machine).
If someone has worked on this problem of wrong answer please
Problem solved with this driver:
http://leshcatlabs.NET/index.php/2012/12/leshcats-catalyst-12-11-Beta-11-unifl-WIN8/
-
LifeCam Cinema - LifeCam.exe has stopped working
Just got a new webcam MS LifeCam Cinema that I ordered, but unfortunately, the software crashes. The question is not the device itself, because I can see the video in the video settings Live Messenger window, and the test microphone also works. However, whenever I try to run the software LifeCam itself, I get the pointer for a second, and then it crashes and I get the message "LifeCam.exe has stopped working".
I am running Vista Home Premium SP2 x 64, completely up to date with windows update. I uninstalled the driver from the CD and it redownloaded go web site (did not work). I checked all the posts on what I could find, the most common suggestion was to uninstall the Nero software, but I don't have any Nero software installed. Any help to get this thing to run would be really appreciated. I want to especially this for video recording, to get the LifeCam program to work is essential.
How many other USB devices attached to this machine? Are you using non-powered for connection hubs? I assume that you have already tried to connect to a different USB port on your computer? Rear ports are better than using all the front ports on most machines (due to wiring and connections, I think). If you change the Windows ports will really rediscover your hardware and quickly (without downloading) reinstall drivers current.
Microsoft hardware
http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=H5D-00001&OS=WVista_3264&lang=enHere is the software available for your product. Follow the link to download.
"The LifeCam 3.2 32-bit and 64-bit for Windows Vista"See the Readme of the LifeCam software
"Download the update of Firmware for your LifeCam Cinema
Something useful in the Readme, and did you also update the Firmware?
For what it's worth, it's only about a week ago when I was offered and downloaded updates via Windows updates for my LifeCam camera. That always seems to work correctly.
-
LifeCam-vx1000 has stopped working Windows Vista
I have a lifecam vx1000. It worked, but I haven't used for awhile and now I get the error "lifecam.exe has stopped working, the program will close." I've tried uninstalling and reinstalling the software, change the port usb... nothing works... Thank you
UPDATE:
I tried to open the Lifecam and this is where the error... does not work with Skype, but will work with Dell chat...Hello
Method 1:
Perform a clean boot
http://support.Microsoft.com/kb/929135
Note: Perform step 7 to restore the computer to a normal startup.
Alternatively, you can perform system restore to restore your system to a time where everything worked well.
For more information about how to run the system restore, refer to the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreMethod 2:
I also suggest you check in Manager devices if the cam of life appears there or not.To open the Device Manager check out the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-ManagerOnce you open Device Manager search for life Cam and check if you find bags of yellow or red exclamation on it.
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 3:
Check out the link provided below to solve the issues relate to life Cam.
http://support.Microsoft.com/kb/929087
You can also check out the link below to manually download the latest version of the software for your Microsoft life Cam.
http://www.Microsoft.com/hardware/download/download.aspx?category=iceFor more information, see the link below,
http://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
-
LifeCam has suddenly stopped working after many years
Original title: problem with my Microsoft Lifecam VX-6000
Problem with my Microsoft LifeCam VX-6000. I used my LifeCam several times when using Skype, but now it will not work. I examined a large number of questions and answers that are listed in the support forum but nothing I found fixes my problem. I am running Vista Home Premium on my HP #SR5050NX PC with a 32-bit operating system. I used this webcam for many years without any problems, but now it will not work. I reinstalled the current drivers on the Microsoft site and it appears in Device Manager that the drivers are correct for the LifeCam VX-6000 webcam. When I try to open Microsoft LifeCam it locates my camera and the green light comes on but no picture. When using Skype, he finds the camera LifeCam 6000 but gives me a message that it cannot use this device because it might already be in use by another application, but no other application works. I have also a Cisco Webcam that I have in the past to select which camera I wanted to use while Skyping but he stopped working at the same time my LifeCam 6000 ceased. I get the same message... This webcam cannot be used because it might already be in use. The drivers are correct on this camera as well. What can I do to fix this?
Thanks, I appreciate your help and your support!
datgrt
Hello
I suggest you to return these items and check if it helps:
Troubleshoot failures to find the new LifeCam hardware
http://support.Microsoft.com/kb/929087
Don't troubleshoot bad or no video or problems to start the LifeCam software
-
Why my Bluetooth Notebook Mouse 5000 suddenly stopped working
I was with my mouse ended last night & my mouse was working properly, but during a transaction, it suddenly stopped working. The bluetooth at the bottom of my toolbar says bluetooth is activated & panel says that it works correctly. I tried new discovery mode, but I don't have the code requested. Please help if you can. I don't know too much about computers, so if you can put answers in terms I can understand, I would be happy.
Hi MzMillie,
Is this a microsoft product? When you are prompted for a key code (although it has not one) try entering 0000 by using your keyboard. For tips on solving this problem, please see the link below.
http://support.Microsoft.com/kb/952818
Let us know if this helped. If you have other questions about this, feel free to post on this thread. Thank you.
-
LifeCam Studio has stopped working after the firmware update?
Hi all.
I bought one of the new LifecamStudio 2 days ago. I installed the camera, following the instructions of course. At the end of installation, I was able to get my self in the window of the Lifecam software, up to now, no problem, the device worked. Suddenly, a pop-up message will appear, telling me that the firmware of the device should be upgraded, then I pressed OK. The update of the firmware started but was abandoned shortly with an errormessage, saying the upgrade was not successful. I tried to reinstall the firmware, but now he tells me Hat I have the latest firmware installed. The nproblem is therefore now that, when I instert my camera in USB port windows find the camera, but as soon as I start any program it uses the camera he's leaving a Lifecam icon (in the hardware Manager that is) to an unknown unit. Software Lifecam studio told me that there is no camera installed. I installed the camera on other computers without a bit of luck.
/ Stefan
Fixed it :)
In the Device Manager under imaging devices I've seen "Webcam" - before the botched fw update, it said 'Microsoft LifeCam Studio' and was a diff driver. I rolled back the driver (or if it does not work you can force it to use one of the program files \ lifecam) then reinstalled lifecam - my cam works now. Now - what's the problem with this update utility and why it changes what is driving the camera uses? -
Driver AMD stop works to start video
Hello
For 2 months I have a problem with Skype when the video begins in the Skype application. The screen freezes for a short time, and then I get the message that my AMD display driver has stopped working and has been reset. It also happens if I just go to settings - video settings. The same problem is also described here: http://community.skype.com/t5/Windows-desktop-client/Skype-Crashes-Video-Driver/m-p/3240988/highligh...
I already tried to install different drivers AMD catalyst - 14.4, 13.12 and driver WHQL provided automatically from windows update. I also tried to completely delete Skype and re - install, I have also removed my webcams and re - install (MS Lifecam Studio and a Logitech Webcam). Everything nothing helped and showed exactly the same end result. I also did a full refresh of 8.1 to win with the inner function where all 3rd party applications to withdraw, without change.
In other applications such as the build in camera 8 Win and Teamviewer app webcams work fine.
I don't really know how to solve this problem. I'm happy for all the advice.
Please see a newspaper closed, more a result of run DirectX diagnostic.
Edit: 5600K - A8 APU where I use the integrated graphics card.
Just to check if this problem is only the latest versions of Skype, try to uninstall the version 6.18 and install the 6.14.0.104 version.
-
LifeCam VX-6000 works do not (detected as USB20 camera)
Hello world.
My Lifecam VX-6000 stopped working a few months ago. When it is plugged in, it is detected as 'USB20 camera' and I have installed the drivers and software from the CD first, or search for a specific location with the drivers, Windows will say he can't find good drivers for the webcam.
I tried a fresh install of Windows XP without success.
Hello
What happened when you tried the steps?
Is there any error messages, you can post in this thread?
What have you tried already?
What is the PC brand and model?
If it failed on a new install of XP, the device may have failed.
You can try it on another computer to see if it works.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: Microsoft applications often stop working.
Hello
My OS is Vista professional family. Microsoft applications are Word 2000, Excel 2000, Windows Mail, IE v.9.01.11. The Applications Windows Explorer crash frequently, with the word several times a day, if not an hour. Generally application stops working, and options include "close the program and search the Internet for solutions. By clicking on this option quickly translates the application startup program details are generally a message followed by message DEP BEX or an APPCrash. I can't identify any recent addition or the deletion of all program. Following is a sample of the problem signatures posted after applications have crashed. They were copied from a Word doc, in which they have been copied and pasted display Details appearing on screen after a crash of the application. I hope that they will result in something to someone in the community, who will explain to explain my problems and possibly to propose possible solutions.
A recent accident of Word displays the details of the following product
Signature of the problem:
Problem event name: APPCRASH
Application name: WINWORD. EXE
Application version: 12.0.6661.5000
Application timestamp: 4f7cd9da
Fault Module name: gdiplus.dll_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4f2bf90a
Exception code: c0000005
Exception offset: 739b74b2
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
More information about the problem:
LCID: 1033
Brand: Office12Crash
.skulcid: 1033
A crash of Windows Mail message BEX
Signature of the problem:
Problem event name: BEX
Application name: WinMail.exe
Application version: 6.0.6001.18000
Application timestamp: 47918ed8
Fault Module name: gdiplus.dll_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4f2bf90a
Exception offset: 734f74b2
Exception code: c0000005
Exception data: 00000008
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f8783416
Another accident of Windows Mail message APPCRASH
Windows Explorer also indicated an APPCRASH
Signature of the problem:
Problem event name: APPCRASH
Application name: iexplore.exe
Application version: 9.0.8112.16455
Application timestamp: 507284ba
Fault Module name: StackHash_efe9
Fault Module Version: 6.0.6002.18541
Timestamp of Module error: 4ec3e3d5
Exception code: c0000374
Exception offset: 000b06b7
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional information 1: efe9
More information 2: e7344786bdd2b67bba3a148841d9ab99
3 more information: 7eb2
Additional information 4: 8c1001f20b0a9ea4ef73b89ec642f751
A message from Excel to crash was also an APPCRASH one:
Signature of the problem:
Problem event name: APPCRASH
Name of the application: EXCEL. EXE
Application version: 12.0.6661.5000
Application timestamp: 4f7cda6d
Fault Module name: gdiplus.dll_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4f2bf90a
Exception code: c0000005
Exception offset: 739b74b2
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
More information about the problem:
LCID: 1033
Brand: Office12Crash
skulcid: 1033
Yell.com has ceased to function and display a signature of the AppHang problem
Description:
A problem caused this program blocking interact with Windows.
Signature of the problem:
Problem event name: AppHangB1
Application name: iexplore.exe
Application version: 9.0.8112.16450
Application timestamp: 503723f6
Hang Signature: 1SS3
Hanging Type: 131072
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Signing of additional blocking 1: 0e0f29b77e2ee0db48c78120c426a95f
Signing of additional blocking 2: a50c
Signing of additional blocking 3: 0e81b6d23e21de2e5d278567f0fad5ea
Signing of additional blocking 4: 1SS3
Signing of additional blocking 5: 0e0f29b77e2ee0db48c78120c426a95f
Signing of additional blocking 6: a50c
Signing of additional blocking 7: 0e81b6d23e21de2e5d278567f0fad5ea
Thank you very much
Birkbeck
Hi Birkeck,
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
. You receive an error code or message?
Please follow the methods and mark the question below:
Method 1:
You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
Method 2:
I suggest you to run the patch from the link below.
Applications may crash in Windows Vista, in Windows 7, Windows Server 2008 or Windows Server 2008 R2:
http://support.Microsoft.com/kb/2541119
Method 3:
For issues with Internet Explorer, please follow the steps in the link below.
What to do if Internet Explorer stops responding:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Internet-Explorer-stops-responding
Tips for solving problems when Internet Explorer hangs or stops working: http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer
Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 4:
Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:
http://www.microsoftsafetyscanner.com/
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope that the information above helps you.
-
Original title: webcam inspiron 1420
I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. "I checked and it is said that it works correctly. I also looked and found something that seems to say that the app crashed. Any ideas? Thank you
BFM
Hi BartMorgan,
· What is the error correct mrssage?
· Is - this "LiveCam.exe has stopped working" or "LifeCam.exe has stopped working"?
Follow the suggestions below for a possible solution:
Method 1: I suggest you put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
You can also check if the troubleshooting steps to help you in the article mentioned:
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266612
Method 2: Alternatively, you can try to uninstall and reinstall the drivers of webcam and check if that helps.
Step 1: You can try to remove the webcam in Device Manager:
a. click the Start button, in the start search box, type devmgmt.msc and press enter.
b. in the Device Manager window, click view , and click Show hidden devices
c. right-click on the webcam is installed.
d. in the dropdown menu, click Uninstall or Remove.
e. in the dialog box to confirm the device removal, click the OK button.
Step 2: Also verify and uninstall the webcam again from programs and features program, if it is installed and then restart the computer.
a. click Start.
(b) in the search box to start, type appwiz.cpl and press enter.
c. in the programs and features list, select the webcam program and Uninstall it.
d. restart the computer.
NOTE: After the reboot, the computer should recognize the connection of the camera and start to reinstall the driver.
I hope this helps.
Maybe you are looking for
-
I have windows7 64 bit, I've had this problem since early October is driving me crazy taking up so much time asked friends nobody can answer this PLS PLS give us an answer soon
-
Win7 x 64 Media Center is unable to play Netflix instant movies
I have no problem, watch instant movies from netflix on the netflix Web site. However, when I try to use media center to watch a movie, I get a message that it was a problem of internet connection. I can watch the movie planned but not the film itsel
-
I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173). According to Microsoft Update, the error code is 0 x 643. I tried to install the update during a clean boot without result. Here is the log:
-
Where is a spreadsheet or a system I can do a household budget?
I can't find a program on this computer which allows me to do a household budget. I don't want to buy something. Is there anything like works on my computer, if so where can I find it?
-
happening only on a few sites of bill payment.