LifeCam hd-3000 not recognized

Similar Questions

• LifeCam Hd 3000 not working only not with Skype

  Hi all

  As the subject says, I have problems with my webcam and Skype.

  Bought this webcam 2 weeks it installed and worked without any problems on Skype and the lifecams application.

  1 week later webcam stops working for no apparent reason. Google and looked at archive forum here and down as suggested.

  Uninstalled and reinstalled the program several times trying different USB ports

  Tried Skype versions (back at the latest)

  Made sure cam mic has been activated gives me a bit of success, but not much.

  When I go into options for recoding and adjust the microphone of HD webcams as 'default' the camera works in the Lifecam program, however if I put my headset by default then the lifecam program tells me 'there is no camera connected to this computer.

  If I use OBS in flow with my headset, by default the cam works without any problem and my audio doesn't work with headphones also no problem.

  So now that it's Skype, if yes or not I change the video etc. pickups options with no view my cam and no one else can see me on all the video calls that I make.

  Any ideas whats causing this problem?

  First try to uninstall GPUTweak Streaming VirtualCam.

  https://Rog.ASUS.com/Forum/showthread.php?47832-GPUTweak-streaming-virtual-webcam

• LifeCam Cinema is not recognized at all

  I just bought a new on Amazon Lifecam cinema yesterday and tried to make it work without success - the sound works, but there is no video. I tried the Lifecam Studio, Skype, and Windows Live Messenger and none of them can use webcam video (it's 'in service' even if nothing else use it). I tried to uninstall and reinstall the drivers & software several times, by plugging the webcam in all USB ports, that I don't have, made a clean boot, each solution on every Web page I've met has done anything for me.

  I followed these articles with no chance of support: http://support.microsoft.com/kb/933311 and http://support.microsoft.com/kb/933310

  Hi Chris,

  I suggest you try the steps from the following links:

  Using LifeCam with AOL, Yahoo, or Gmail
  http://support.Microsoft.com/kb/969275

  With the help of your LifeCam with Microsoft Live Messenger
  http://support.Microsoft.com/kb/921332

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Not recognized on Satellite 3000 514 Notebook memory intermittedly bench

  At the start of my satellite 3000-514-Notebook, which contains 2 banks of memory of 256 MB each, the upper 256 MB Bank very often is not recognized more, and my laptop runs on 256 MB only. Initially, this happened only when I started in hot condition, while that morning, all 512 MB has become available. All memory different tests, including MSDiag, show no error when running with 256 or 512 MB (when available). but the laptop does not start when I change banks of 2 memory or simply use the top Bank in the lower position. I would just buy a new memory of 256 MB of memory, if I was sure that the memory and not the motherboard is the culprit. Anyone have an idea how I could fix this?

  > I would just buy a new memory of 256 MB of memory if I was sure that the memory and not
  > the motherboard is the culprit

  Therefore, the diagnostic test is necessary.
  A technician can test the memory slots with different memory modules and after these tests, it can give you a detailed report.

  I don t think that everyone here will give you a 100% solution. We can speculate and it s something wrong with the memory module or the motherboard. But a test is necessary to ensure the fault.

• Microsoft Lifecam vx-3000 webcam does not work with all applications.

  Original title: lifecam vx-3000.

  LifeCam vx-3000, was used for years a couple works very well now it seems to work well for messenger and works when lifecam program is open however does not work if I try and use it on any other web site? Web cam starts picture freezes up with a still image or just empty. Yet once downloaded the software and drivers off microsoft site. Guess it is just a setting. Any suggestions?

  Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?

  2. what websites you are talking about?

  You can follow this link & check if the problem persists:

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  Hope the helps of information.

• LifeCam VX-3000 does not work

  I'm trying to get my new LifeCam VX-3000 works with Vista. Whenever I put in the software disc, a message appears telling me that I'm "not connected to the internet", when I know I am! Can anyone help?

  Hi Tw11david,

  Reset the settings of internet explore and then try to download the lifecam software. Open the link given below and click the Fixit who resets the settings of internet explore automatically.

  http://support.Microsoft.com/kb/923737

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• LIFECAM HD 3000 does not work!

  I uninstalled my life cam hd 3000 more than 20 times hoping it would work, my life cam only works with the micro, but not the video capture. I'm using windows 7 ultimate... 64 bit please help! I tried everything on the shooting of boredom, everything worked until I got an upgrade to windows 7

  Hi James,

  I see that the LIFECAM HD 3000 does not work. I'll help you with this problem.

  1 Whatís the brand and model of the computer?

  2. what security software is installed on the computer?

  3. What is the exact error that you get while trying to use the video capture?

  4. how the device is connected to the computer?

  Method 1.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  A clean boot to test if any element of service or third party application startup is causing this issue. Try to install the drive in the clean boot state and check.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest you to refer to this article and check if that helps.

  Troubleshoot failures to find the new LifeCam hardware: http://support.Microsoft.com/kb/929087

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you change it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Microsoft Lifecam vx 3000 - recipient not able to hear the sound

  I installed the LifeCam as stated but my recipient can't hear me.  We see each and I hear them, but they don't hear me.  Could someone please help.  I'm not really savvy in computer science, but I try.  Thank you.

  Hello

  I understand that you are facing problems with Microsoft Lifecam vx 3000.

  1. what program you use to video chat?
  2 have you tried to use this webcam with other programs?
  3. do you get an error message?

  I suggest to see the next procedure and check if it helps.

  Method 1:

  I suggest to run the hardware and devices Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  
  Exercise the functions mentioned below to adjust the Microphone as default:

  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. Select the Microphone, and then click "Set as default".

  Note: Also in the playback check if the speaker is set as default. Method 3:

  Method 3:

  I suggest you to install the latest drivers for webcam If the problem persists.

  You can follow the link given below to download the driver for Windows 7

  http://www.Microsoft.com/hardware/en-in/d/LifeCam-VX-3000

  Reference:

  LifeCam problems

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope this solves the problem. If this problem persists, then please get back to us with the results of these methods and any additional information. We will be happy to help you.

• LIFECAM VX-1000 WEBCAM NOT RECOGNIZED ON MY LAPTOP ASUS

  VX-1000 camera is not recognized on my windows 7 64 bit operating system.

  I tried to install the software from the microsoft Web site, and it gives me an error message "THERE IS No. CAMERA CONNECTED to THIS COMPUTER"
  WHAT CAN I DO?

  Hi BaskijeLlupa,

  This problem may occur due to already installed a Logitech Webcam or if the LifeCam drivers are incorrectly installed.

  I suggest you try the procedure described in the article and see if it helps.

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Microsoft LifeCam VX 3000"does not work"

  I have upgraded to windows 7 and I'm trying to re - install my LifeCam VX-3000 but wen I do, I get a message indicating the cam "does not work" and "the program will close." I installed the drivers supplied by microsoft (LifeCam 3.2) and nothing. I even tried to re - install disk but it says that it was not compatible with windows 7 (it was LifeCam 1.4). So now I have a webcam that I can't use yet is supposed to be compatible with Windows 7.

  I was using XP before and had the same problem, update drivers exactly the same problem has happened then so I had to stay with the drive, but now I can't do same. Any help to what to now please?

  Thanks for your reply... but he turns there where some .dll missing as some other programs didn't work either so I re-installed the reg files and it's ok now... Thanks anyway

  Concerning

  Romani

• We get an error "Device driver software has not been installed successfully" when installing Microsoft LifeCam HD-3000

  * Original title: does not always

  There is a windows 8 there, but I'm trying to download it right now and a red Tin can that appear when it comes to the end and when I click on continue anyway, it restarts just install it?

  Just at the moment where I thought that he had finally worked as he said completing the installation to have fun and enjoy, when I click on finish, that's what I get on my screen "device driver software was not properly installed" the with next to "Microsoft LifeCam HD-3000", he says has failed. ". The LifeCam shortcut on my desktop now will not open.

  Hi Rachel,

  Thank you for your response.

  I suggest you to contact the Microsoft Hardware support for assistance on this issue.

  http://www.Microsoft.com/hardware/en-CA/support/contact-us

  It will be useful.

• Failed to install LifeCam HD-3000

  Hello

  I can't install Lifecam HD 3000 on a Win XP PC with all of the updates in the order.
  An error message appears during installation says it failed without and reason and gave the following link: http://support.microsoft.com/kb/953691

  I have gone through all the steps on this link, but does not help.

  I checked the people who have had the same problem, but no help, links below I checked

  • https://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/9b07dba1-2b28-47bd-9423-e4db4b8b5a6f
  • http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/LifeCam-HD-5000-driver-and-software-installation/08e7300e-C32D-4595-9799-deb3016a8041
  • https://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
  • http://support.Microsoft.com/kb/973297
  • http://support.Microsoft.com/kb/953691

  I also tried mode of fail-safe with network enabled, logged as administrator, but with the same defect.

  Why can't download us manually the installation complete SW?
  (SW 'LifeCam3.60.exe' can be downloaded from

  • https://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-3000

  is not a complete package of SW, it comes in contact with MS and download more things and that is what crashes, we can see the connection in a firewall schedule downloads about 5 MB, which is of ~ 10% of the progress bar up to what it fails, then obviously, the whole package, he wants DL exceeds > 50 MB)

  Please if possible give me a link for the complete SW a manual download, or where to find a generic webcam SW, if it is not please give some advice how to do this, thanks in advance.

  Hi I solved it, please read because it might help you too!

  When I opened this thread I tried for 4 hours to solve this problem * and apparently a lot of people have problems with the installation procedure.

  When I installed the program, I noticed at the beginning in a small window that shows progress, he showed a folder he had created and had a random name composed of letters and numbers such as: 56eb37a890142, go and find him!

  In this case, it creates subfolders where the subfolder has the name «windowsinstaller»

  • Drive:\56eb37a890142\windowsinstaller\x86\windowsxp-KB942288-v3-x86.exe

  (Your path may be different, but the mine was created on a different driver/partition that my Windows driver.)

  During installation, I was going through all the steps (in fact I just leave the installation in the middle of the process, as it is, if I remember there are 3 steps, first unpacking, the other 2 steps is displayed in a new window, and I don't remember now I did the 2nd step, however, this is the 3rd step that fails but in this hack you do not go there)
  ... instead, once the 56eb37a890142 folder was created, I went in the subfolder and installed the

  • WindowsXP-kb942288-v3 - x 86 .exe

  Once this file has been installed, Windows automatically forced the closure of programs and handed over in market, after reboot, I returned to the

  random 56eb37a890142 of the folder and double-click the following file

  • Setup.exe

  All of a sudden the installation went through, obviously something is wrong with the installation program, I think it not to apply the update of windowsxp-kb942288-v3 - x 86 .exe, or somehow fail to do.

  One last thing on the randomness of the '56eb37a890142' folder, I have a low memory, if the installation failed, the folder would be removed, so we might have to make a copy of it.

  Edit: I checked the Windows Installer "windowsxp-kb942288-v3 - x 86 .exe '.

  It's a "Windows Installer 4.5 Redistributable", it can be downloaded separately from the link here below, we could try this instead of the procedure described above:

  • https://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8483

• Cannot install lifecam hd-3000 on my old toshiba laptop windows xp, I have no configuration required

  my computer - toshiba 2004 (old) Windows xp cannot install lifecam hd-3000

  Hello

  How you are trying to install LifeCcam on your computer?

  Make sure that the computer you are using meets or exceeds the minimum video, processor and memory to install and run LifeCam.

  Open the DirectX Diagnostic tool. To do this, follow these steps.

  (a) click Start, click run, type dxdiag in the Open box, and then click OK.

  b) on the System tab, note the processor and memory values listed under System Information.

  (c) on the view tab, note the value of approx. total memory is listed under the device. Most LifeCams require at least 2 MB of video memory.

  (d) click exit to exit the DirectX Diagnostic tool.

  Compare the values that you noted in the minimum system requirements that are required for LifeCam. You can find the system requirements for each LifeCam on the Microsoft Hardware Web site. Click on the product of LifeCam you have installed, and then click the Details tab to review the system requirements.

  To compare the system requirements for your LifeCam product, please visit the following Microsoft hardware Web site:

  http://www.Microsoft.com/hardware/digitalcommunication/ProductList.aspx?type=LifeCam

  Note: If the computer does not meet the minimum system requirements, contact the computer manufacturer for more information about how to obtain the updates and upgrades.

  For further information, you can consult these articles.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

   

  Troubleshoot failures to find the new LifeCam hardware

   

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

• Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.

  original title: no camera not connected to this computer.

  Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.

  Help, please.

  Hi Shaykc,
  Here's a quick walk to implement this cam:
  http://support.Microsoft.com/ph/7746#tab1
  Eddie B.

• Problem dark videoconference with WinLive Messenger and LifeCam VX-3000

  My LifeCam VX-3000 webcam cannot support a video call in Windows Live Messenger. I can text back OK, and sound and motion video work very well when I check the audio/video settings. When I try a video connection, the system hangs on my end... the other party may accept the call but my end still ringing and the video image is frozen... There is no sound during this video call attempt.   The system is XP Home SP3... all security is up to date. I use a 6 Mbit internet service.  I did a complete uninstall of Windows Live Essentials, re-installed components and get the same result. This Setup worked fine until a week ago.  This problem would have started at the time, I installed and started using MagicJack, but I tried to uninstall Magic Jack and the result is the same. Maybe another change is that Windows Live Messenger has offered an upgrade to a newer version that was made.  I'm looking for some ideas on any peripheral or software conflicts and methods to isolate or resolve them.

  Hello
  
  Method 1.
  First of all I ask you to re - install the Microsoft Life Cam software and drivers from the link below and then check out.
  http://www.Microsoft.com/hardware/download/download.aspx?category=ice
   
  Method 2.
  If the problem persists, perform a clean boot to find any conflicting with the Windows Live Messenger application.
  For more inoformation on boot, refer to the article below.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Don't forget to set the computer to start normal, as mentioned in the above article.
  Also update the chipset drivers and check. You may need to contact the manufacturer of the computer for that.
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.