LifeCam HD-6000 works do not with the ThinkPad T60p, Windows XP Professional

Similar Questions

• Mouse and keyboard not working only not with the ERD in Windows 7 and Windows 7 install disc

  I have a Dell XPS 8700.  I just did an upgrade to an SSD.  The DSS started once with no problems, then it wouldn't start.  I get an error message 1 MBR.

  If I do a F12, I am able to boot from the SSD drive and everything works fine, but if any process requires a reboot it will not work.  IE, windows update that requires a restart does not update because it cannot restart.

  To fix the MBR, use either the repair or install disk to get to the command line.  I have two drives and when I boot with them I get the initial screen of language/keyboard and mouse and keyboard do not work.  I have the keyboard and mouse installed in USB 2.0 ports, their was also in 3.0 ports with the same results.  They work fine until the disc over to install the files, and then they die.  I tried 2 different sets of keyboards and mice with the same results.

  I also tried to use the Dell recovery disk and it did find and supposed to solve a problem when I ran in the beginning.  But I still get the MBR error.  The disc is represented and it did not find any problems and I wanted to reinstall windows back to the factory.

  Suggestions as to how to get my mouse and keyboard work again with the repair and install discs would be greatly appreciated.

  Hi Navneet,

  Thank you for responding.

  Did you change the computer other than the upgrade to an SSD?

  Yes, I have, but that was before the SSD.  I upgraded the video card and added a 1 TB of HARD drive data.

  What is the complete error message you get on the MBR?

  The message reads as follows;

  "MBR 1 error.  Press any key to boot from floppy. »

  There is no floppy drive installed and I even tried to start with only the connected SSD.

  Are you an error code?

  No error code.

  As for changing the BIOS, I am not satisfied with messing with the BIOS, if this isn't an option.

  After thinking about this problem, I think that Dell has disabled somehow able to use disc repair/install "Windows".  I say this because they have disabled the ability to create a disk to repair Windows out of the Dell system and cannot create a Dell recovery disk.  Also because Dell has changed the MBR it wouldn't do any good to reset the MBR to the default value of Windows and the Dell recovery disk does not give you the ability to recover the MBR manually only.

  I decided that the best option was to do a clean reinstall of the OS, and that's what I did.  Everything works great for now.   It is a PITA, but nothing that I have not done before.

  Thanks again for your help...

  Mahalo,

  DEX...

• Aero is not working is not in my computer running windows 7 Professional

  Aero is not working is not in my computer running windows 7 Professional. My computer config is Intel pentium 4, 1 GB ram, 120 GB HDD, no graphics card, mercury mother board (PI865D7) and my display driver software only works for XP. I used Vista previously, the aero effects worked perfectly in that.

  When you ran the Windows 7 Upgrade Advisor before upgrading to Vista, not it said you you had a potential problem with your graphics card?

  Your mercury PI865D7 mobo uses the Northbridge Intel 865GV chip / 865G for graphics.  According to Intel, no Windows 7 driver available for this graphics controller.

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• Function of ' play to ' Media Player works only not with the music on external drive

  Hi, I have not been able to "play to" music files stored on my Seagate external drive to a receiver AV Pioneer... "Play"works very well with the stored music files on my drive c of the laptop. Music on my external hard drive will appear in my library. Have laptop Windows 7 with Media Player... any help appreciated... .thanks

  Hello

  Do you have any application installed on the computer security?

  Method 1:

  If you do, I suggest you to disable anti-virus and check if it solved the problem.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the step is not enough, then you can go to the method 2:

  Method 2:

  I suggest you go through the steps and check.

  a. closed Windows Media Player12.

  b. Access Services [table-> system and security-> administration-> Services tools]

  c. find the service named "Windows Media Player Network Sharing Service"

  d. stop the Service manually.

  e. Locate the "UpnP device host"service. Stop the service and restart it.

  f. run "Windows Media Player Network Sharing Service" now.

  g. close windows all associated and the Panel. Open Windows Media Player, right click on a playlist and see if the Play option lists the TV. Try to play now.

  Hope this helps and keep us posted.

• LifeCam VX-6000 works do not (detected as USB20 camera)

  Hello world.

  My Lifecam VX-6000 stopped working a few months ago. When it is plugged in, it is detected as 'USB20 camera' and I have installed the drivers and software from the CD first, or search for a specific location with the drivers, Windows will say he can't find good drivers for the webcam.

  I tried a fresh install of Windows XP without success.

  Hello

  What happened when you tried the steps?

  Is there any error messages, you can post in this thread?

  What have you tried already?

  What is the PC brand and model?

  If it failed on a new install of XP, the device may have failed.

  You can try it on another computer to see if it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LifeCam vx 5000 works do not with tinychat

  Earlier today, I bought a lifecam vx5000, I set up and installed without problems, but I can't use it in tinychat.

  I've set up correctly, but I'm the only person who can see my cam. This question doesn't work with tinychat, it is going to work very well with programs like YIM and others, is it all just not compatible?

  Any help would be appreciated

  Hi acidnation,.

   
  As there is no problem using webcam with other programs, there must be some parameters of the tinychat to configure with tinychat webcam to work properly. We recommend that you double check that the settings for the webcam to tinychat or settings in tinychat to set up the webcam.
   
  For further assistance on tinychat, see contact information: http://tinychat.com/about.html
   
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.

• iPhone 6s 9.3.2 bluetooth doesn't always work only not with the control system of Mercedes

  Connection Bluetooth iPhone 6s with Mercedes control system does not work with version 9.3.2.

  (Last worked with 9.3).

  Hello..

  On your iPhone, tap settings > general > reset > reset all settings , and then restart your iPhone and then try Bluetooth with the control system of Mercedes.

  * No data is lost due to reset

• Connections not working only not with the saved web pages... I have to sign in again every time?

  Could I not connect automatically to all Web sites? iGoogle does not start, each page that I add to the homepage which is a personal page comes with a connection... Firefox has never done this before. My iGoogle page is the default page for the years... Now I have DLd v.20 and nothing works?

  What the?

  It worked... Not sure how the settings changed, but it seems that v.20 differs somewhere.

  Thank you!

• Satellite Pro A10 - some keys not working only not with the new keyboard

  Hi all

  I hope some1 can help with this

  I have a Satellite Pro A10. The prob I have is a.b.n.and enter keys do not work and this is a new keyboard
  I hooked my other A10 and all keys work so the keyboard is fine.

  Everything works fine with the usb keyboard. Mother board everything seems ok.
  Any help please

  Chris...

  Post edited by: widgy

  Hello

  Why do you think the motherboard is ok?
  Maybe it s a controller keyboard problem
  Did you check if the cable is correctly connected?

  In my opinion if you are sure that the keyboard is ok 100% the problem to be attached to the motherboard because there is no other party that is placed between the keyboard and the mobo.

  Good bye

• Remote control not working only not with the G10

  Hello
  my remote was working initially. now it does not work in Qosmioplayer or WinMCE mode. The red light in the receiver when you press the remote control in order to do not a dead battery! any suggestions as to what was popular up

  Hello

  Have you installed any other tools or utilities, or have you changed a few settings?
  As far as I know you need the infrared receiver only to control the MCE Win.
  The receiver is plugged into the USB port. Please check in Device Manager if the receiver is recognized. Also, check the cable of the infrared transmitter is also related.
  However, if you are working with the Qosmio player receiver should be removed from the unit.

  Moreover, in the user manual, you can find useful information about the remote control

  Best regards

• SmartWatch SW2 not working only not with the LG Swift L9?

  OK, I've had something similar with previous Smartwatch (MN2), but I had hopes to go with SW2.

  LG Swift L9 is 4.1 (JBean). SW2 is *. B.0.25 (ALREADY updated with the latest, via a soft PC/cable and Sony Update Service).

  So here's how it is:
  -J' managed to pair with me LG9.

  -demand for Smart Connect (on the idle screen) so I install it from the game.

  -by opening Smart Connect on the phone, asking questions about SW2 app, once again - I install it from the game.

  -then what happens, is that I get the white rectangle on a gray background on the screen of smartwatch and SHE.

  -the only thing to recover/restart of the process is to reset the watch, try to pair again, that works, but immediately after, if I'm only smartconnect - I get the white rectangle on a gray background.

  Any ideas? Suggestions?

  My Sony - its advertised to work with 4 + smartphones Android, LG Swift L9 is such a smartphone. If it turns out to be a blocker - I'm going to Pebble (assuming that if he only works with LG L9)- AND WILL NEVER LOOK BACK.

  I wanted to stick with Sony, because I am a dev, and Sony seems to provide more structured SDK/API for this product by comparing to other smartwatches (with relatively pleasant store Play integration). But * beep *, know all this im lose confidence... (and patience).

  PS Yes - I called Sony support UK already, but they seem clueless. It seems that these guys here never had the SW2 in their hands.

  OK, looks like I solved my problem, then post it here - if someone comes barely similar.

  I took my SW2 to a colleague with another motive than mine (I think it's Samsung Galaxy something SII, also with Android 4 +). Then we paired up, and then, surprisingly - SW2 downloaded a SW update, got the upgrade to this 1.0. * slash 1.0. * version and the work began with his phone. Then we odd he reset the SW2 and paired with my phone - and it worked!

  Was apparently the version of SW2, I had initially was veeeeery old, old enough that didn't connect my LG L9 and old enough that my LG L9 might not even be updated. Once we have passed this point - everyhing works fine (at least for the last 5-6 hours).

  Problem solved then.

• WRT160N works, but not with the internet

  Heya!

  We have the WRT160N for a little while now and until a few days ago, it worked very well!

  A few days ago, the internet on our homenetwork started have really very slow and even 1 pc cannot connect at all.

  So we decided to give the router a hard reset.

  After that we did it, the network is back (our wireless network is not protected, but we'll fix that soon after we had it working again).

  Only, we do not have operating... We returned our network so we can use the maps shared on all computers, but internet has disappeared!

  We got 1 pc near the Modem, so we connected the pc to the modem and it got internet right away!

  Then we plugged the modem to the router again once and then beautiful blue light on the logo 'internet' on the router and everything was going on well again.

  Unfortunately, it was not. The internet still wasn't back! local network available on all PCs!

  So in short:

  After resetting the WRT160N, we could only use the LAN, so is not the internet. While the router itself says it has internet (it is connected to the moedem correctly).

  Things you should know:

  -We do not have internet on our modem, PCs that are connected directly to the modem have no internet

  -the cable between the modem and the router is not broken, we have tried other cables but same problem

  -We also made the modem, then turned the router, that rekindled the modem and then the router back, still nothing happened

  -Now we plugged our selector of ould (Wireless-G) back on, and it immediately starts to work OK!

  So please...! What is the problem with the WRT160N? We have forgotten something after the reset? We need to define a configuration somewhere? Maybe its broken?

  TNX for the answers already!

  Your router lost its configuration after you have reset it... You need to reconfigure your router now...

  If your Internet Service is cable follow this
  If your Internet Service is DSL follow this

  SE if you can connect to the internet now...

• I have a problem with my canon cam works only not with the eos unility now

  OK I use to connect my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software and they say it's a problem with vista 64, do not leave the work of software he will work with the computer, but not the eos utility they told me to remove the key from the vid but donty know how

  Monday, January 31, 2011, 20:35:31 + 0000, tank5700 wrote:

  OK I use to plug my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software, and they say it's a problem with vista 64, not to let the work of software it will work with your computer
  but not the eos utility they told me to remove the key from the vid but donty know how

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP