LifeCam vx-3000 does not work in Windows 7 for me.

Similar Questions

• LIFECAM HD 3000 does not work!

  I uninstalled my life cam hd 3000 more than 20 times hoping it would work, my life cam only works with the micro, but not the video capture. I'm using windows 7 ultimate... 64 bit please help! I tried everything on the shooting of boredom, everything worked until I got an upgrade to windows 7

  Hi James,

  I see that the LIFECAM HD 3000 does not work. I'll help you with this problem.

  1 Whatís the brand and model of the computer?

  2. what security software is installed on the computer?

  3. What is the exact error that you get while trying to use the video capture?

  4. how the device is connected to the computer?

  Method 1.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  A clean boot to test if any element of service or third party application startup is causing this issue. Try to install the drive in the clean boot state and check.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest you to refer to this article and check if that helps.

  Troubleshoot failures to find the new LifeCam hardware: http://support.Microsoft.com/kb/929087

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you change it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• my life chat lx-3000 does not work with Windows 7 help plz__

  my life chat lx-3000 does not work with window 7 help please

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft LifeCam VX 3000"does not work"

  I have upgraded to windows 7 and I'm trying to re - install my LifeCam VX-3000 but wen I do, I get a message indicating the cam "does not work" and "the program will close." I installed the drivers supplied by microsoft (LifeCam 3.2) and nothing. I even tried to re - install disk but it says that it was not compatible with windows 7 (it was LifeCam 1.4). So now I have a webcam that I can't use yet is supposed to be compatible with Windows 7.

  I was using XP before and had the same problem, update drivers exactly the same problem has happened then so I had to stay with the drive, but now I can't do same. Any help to what to now please?

  Thanks for your reply... but he turns there where some .dll missing as some other programs didn't work either so I re-installed the reg files and it's ok now... Thanks anyway

  Concerning

  Romani

• LifeCam hd 5000 does not work with windows media player

  After the installation of the life cam HD5000, windows media player does not detect the external usb sound card card. Oddly enough, I use winamp.  any ideas?

  TIA

  Hi v4r5m0,

  (1) it works fine in other applications?

  (2) you get an error message?

  Method 1: Set your USB soundcard as audio device in Windows Media Player by default

  (a) in Windows Media Player.

  (b) click Options on the Tools menu, click the devices tab.

  (c) click on your speakers, click on properties,

  (d) click the options you want to use for playback, click OK, and then click OK.

  Method 2: Run the fixit available in the article below

  Why my computer does not detect my new USB (Universal Serial Bus) device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: You can see the steps outlined in the article below

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Method 4: You can see the steps mentioned in the link below

  USB audio devices

• LifeCam VX-3000 does not work

  I'm trying to get my new LifeCam VX-3000 works with Vista. Whenever I put in the software disc, a message appears telling me that I'm "not connected to the internet", when I know I am! Can anyone help?

  Hi Tw11david,

  Reset the settings of internet explore and then try to download the lifecam software. Open the link given below and click the Fixit who resets the settings of internet explore automatically.

  http://support.Microsoft.com/kb/923737

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• LifeCam 3.0 does not work on windows 7 Why?

  I can not even finished with the installation of this software why? In the installation process, you may not set up the webcam Lifecam HD (last step)

  Hello vlad-k,.

  Thank you for visiting the Microsoft answers Site.

  To help, is there an error message during installation?  If so, please relay the error message.

  Also, have you tried to run the Windows Installer CleanUp utility to remove the previous 3.0 LifeCam installation files listed under method 2 in the previous link provided below:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  If so, please relay if the same problem occurred after you run the Windows Installer CleanUp utility.

  You can run the Windows Installer CleanUp utility to remove all files previously LifeCam 3.0 installation and then try to install again.

  To do this, unplug the LifeCam 3.0 device and please try Method 2 in the following link:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  After you run the Windows Installer CleanUp utility to remove all files previously LifeCam 3.0 installation, check the control panel > programs > programs and features to check that there aren't any ads for the LIfeCam device. In the affirmative, please right-click on the LifeCam program list and click on uninstall.

  Then, you can click on the link below to try to install the LifeCam 3.0 appliance software.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=68c-00001&OS=Win7_3264&lang=en

  If the problem persists, you can also continue to method 3 to verify that the Windows Installer service is set to automatic in the same article as well:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  I hope this information is useful. Please let us know the status after the above steps so that we can provide additional assistance.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My optical mouse 3000 does not work even if the red light is on in the background

  My optical mouse 3000 does not work even if the red light is on in the background

  Hi Russell,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the optical mouse 3000.

  It would be great if you could answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?
  3 is confined with any specific application?

  I suggest you to see the steps in the following Microsoft article.

  
  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

  We would be more than happy to help you if the steps above did not solve the problem.

• Acer Aspire 5536 Webcam does not work with Windows Live Messenger

  My Acer Aspire 5536 laptop with built in Crystal Eye webcam does not work on Windows Live Messenger.  Open the application of webcam Crystal Eye went very well, taking pictures is fine, until I want to use it in a conversation on Messenger.  Is there something I can do?

  A quick response would be much appreciated.

  Hi Tom Hawx,.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can follow the steps mentioned in the article below to configure settings for audio\video Messenger.

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332

  (Article applies to deliver the LifeCam, works very well for the issue)

  If the problem persists always, for more expert on this issue, help post your query on Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Touch screen does not work in Windows XP - Portege 3505

  Hey

  Anyone know why the touch screen on my portege 3505 does not work in windows xp?

  A lot of cheers

  Steve

  and no one knows what you have done or installed on your laptop?

  Sorry about that, but who need to know that? Have you changed something on your laptop >
  Did you install a new OS? Have you used the Toshiba recovery image?

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!