Light of error on the printer

When I click on the paper, print support to halfway and then the fault indicator is displayed. Diagnosis says everything is fine... I've recently updated the drivers. I use HP Deskjet F4280 All in one printer. I also have Windows 7. Please help me to get this printer working again! Thank you in advance.

Hi there nugget12,

This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

Good luck!

Tags: HP Printers

Similar Questions

  • When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

    When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

    Hello bdoolen, please try to reset firefox and see if that can solve the problem...

  • Want 4500: Connection error! The printer could not connect to the server

    Connection error! The printer could not connect to the server!

    Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

    I am successfully connected to my router and can print from my pc and my ipad with airprint.

    PC "will not find"the printer either for purposes of updating

    What I need to change the DNS. If so, I don't know what it is or how to do it!

    I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

    Can anyone help?

    Very frustrated customer :-(

    Hi @roopuk,

    Thanks for getting back to me.

    Sometimes the manual DNS / won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

    Manual preferred DNS Server:
    Auxiliary manual DNS server:

    If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

    What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

    Here is the information that you need for your provider service to open ports on your router/modem...

    -Multicast must be enabled
    -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
    -Mac filtering should be disabled
    -Also, make sure that your router's firmware to date if
    - The dmz on the router mode and turn it on to the printers IP address: _

    Ports to open are: Eprint and Apps

    Incoming Ports.

    Outbound ports

    Once they are open, you should have no problems connecting to services web eprint on your device.

    I would like to know how it works for you.

    Kind regards

  • C4780 - error in the printing system

    C4780 worked without incident for months until recently - now I find randomly in status 'offline '.  Today has been visited by "error in the printing system.  Any ideas?  I already deleted the printer and the software which then does a re - install using the downloaded software from the HP site (can't locate the original install CD).

    OK, I'll assume that this printer is connected wireless to your router.  I would like to know if it's USB to your PC.

    First of all, don't use WEP.  It is not safe and can cause connection problems.  Use WPA with a password of 13 + character that you create yourself!  Much easier and safer.

    From the front of the printer: [Scan] Setup > network > wireless network Test.  It will be radio of the printer self-test.

    When the printer is offline, run this utility.  It will tell you what is happening.

  • When you print it out paper HP PSC 1507 just repeat the error in the print job

    Hi im on MAx OS X 10.6.4 and I got it all in one HP PSC 1507 printer... I don't know why but I have intralled all the drivers n etc. but it keeps just coming with error in the print job just stay

    Any help would be appreciated

    Thanks George

    Good question.  Although it is listed as being supported under Snow Leopard, there is not another print and scan all drivers.

    We will restore the print system and just use the built-in support for your printer:

    -Sys Prefs, Print & Fax
    -Right (control) click inside the box that lists your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • Error in the printer for 16-bit application that runs in Windows7 32 error "caused a floating point exception in hpcui121.dll to 0x5b39caea.

    Original title: Error in the printer for 16-bit application that is running in Windows7 32

    I have a 16-bit application. I'm running Windows 7 32. All of a sudden, I can't print my application. I have two messages: "caused a floating point exception in hpcui121.dll in 0x5b39caea" and "caused an access violation in WOW32. DLL to 0x6dc50421. Any help to solve the problem would be greatly appreciated.


    Have you tried the methods suggested in my previous post dated August 29?

    Response to help you further.

  • HP8620: Error in the printer

    I went to my HP8620 yesterday to find a printer error duisplayed on the screen.  He said "Please stop printer, then press.  All the lights were flashing.  I turned the printer, then on and the printer has been its start-up phase.  Almost immediately, the screen went black, then blue, and finally the printer error appeared again on a white background.

    I repeated this procedure several times them turn off the printer and unplug.  I disconnected and then reconnected the USB connection to my PC.  Whenever the printer error again.  While the screen is momentarily blue there is a code B840E9E2 displayed number.

    Sometimes my PC goes to Flash a message if the device connected to the USB port is not recognized.


    Please try the steps below...

    1. While the printer turned on, unplug the power cord from the back of the printer.
    2. Unplug the USB cable from the back of the printer, as appropriate.
    3. Turn off the wireless router.
    4. Wait 30 seconds.
    5. Connect the power cord to the printer.
    6. Check if an error appears.
    7. When the printer is ready, make a copy. Check to see if the error is.
    8. Turn on the wireless router.
    9. Check to see if the error is.
  • Error in the printer "document in the ADF.

    Original title: Canon injet 310 series

    All of a sudden, my printer shows this error when I try to print "document in the ADF.  When I press ok to delete it, the same message appears.  What is an ADF?  How can I fix?  Help, please.  Thank you.

    Linda, in addition to "stir" around with the paper-feeder(open the drawer, take out the paper, put it back in well aligned) and wiggleing everywhere elsewhere where it is possible, I'm ideas! Sorry! Don't forget: it's obviously a kind of jam: just so push, shake and 'free' the printer...

  • router and modem lights are flashing and the printer does not work wireless and system said detection of problems

    Cannot communicate with the printer wireles or pluged.  Lights suggesting that something is not connected correctly.

    Check with the manufacturer of the router/modem, or if it is provided by an access provider, ask your ISP.  Flashing lights definitely have a meaning and if deciphered will tell you what does not work correctly or well connected.

  • Error in the printer - Deskjet 6840

    My printer displays the message - "Not compatible with the printer ink cartridge" and will not print a document.

    I use HP 94 and 95 cartridges. They were new a month ago. The printer has been my reliable MAC since the purchase of this issue four or five years ago.

    What should I do to clear the message and continue printing?

    Thank you

    These new trucks never worked, or made the mistake of the printer on when you inserted the?  If the latter, one or several carts my be bad.

    You can try to remove the two wagons and close the cover

    Turn the printer off

    Remove the power to the printer for a few minutes

    Plug the print back, turn on.

    Once he tells you that the carts are missing, insert 1 and close the lid.

    Look for the error messages on this basket.  If it appears, and the error message on this basket, than using another basket if possible as it appears, it may be bad.  If there is none, pass the following, if it doesn't throw an error to try to printer.  If so, what this basket can be the problem.


  • Photosmart P6350 will not print, but the computer analysis. Have 'Error' on the print monitor

    The two HP1300 Photosmart inkjet machines and displays the same error message and print, however the Photosmart P6350 scans and copies. Scan indicates the all-in-one is online, but I send a print command and the print monitor responds with 'Error' and no other information. I'm puzzled. I tried all the remedies support hp; same result. iMac OS 10.6.8 recognizes two printers but simply shows them "idle".

    Download and install this:

    Reset the printing system:

    -Go to System Preferences > print & Scan
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • How can I fix the following error message: The Print Shop 3.0 (or other program) has encountered a problem and needs to close.

    Print shop does not open. He was relocated several times.  Every attempt to open the following the error messge program appears: The Print Shop 3.0 has encountered a problem and needs to close.


    Check the event log information when you try to start printing 3.

    Procedure to view and manage event logs in Event Viewer in Windows XP


    I suggest that you start the computer in a clean boot with printing 3.0 active state.

    See the link below to perform the clean boot in Windows XP.

    How to configure Windows XP to start in a "clean boot" State


    How to configure Windows to use a Normal startup state

    After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    1. Click Startand then click run.
    2. Type msconfig and click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
    4. When you are prompted, click restart to restart the computer.
  • How can I fix the error message "the print spooler service does not work."?

    All printer drivers that I had loaded do not work or have disappeared.  After you download the printer drivers, I got the error message: "operation could not be performed.  The print spooler service is not running. "I have Windows XP.  I need to print now!

    To start the print spooler service, click Start > all programs > Accessories > run. In the run box type in services.msc. In the Windows Services window right-click on print spooler and select open. You will then see the options "Start automatically", and then on the button 'Start Service'. Click on those and then click apply then OK. Who should start the print spooler service, however, if you get an error message, see the link below for more information.

  • Network charges (7310) printer to 100%, then the error message: "the printer is not responding" - help!


    until yesterday (with the new driver), everything was fine. Now the printer (Officejet 7310) print no more when it is connected to the network (ethernet or USB (to the router). The printer will print directly connected via USB to my MacBookPro, also when connect to my iMac.

    Tried everything, deleted and added to the printer (green light), restarted the pc, printer etc. Cannot read the extra level, utility HP does not get data to the printer.

    Everyone is any hint?

    Thank you very much!


    Hi Efi5,

    Make sure the printer connected to your router by Ethernet.

    Unplug the router for 30 seconds, plug back in and try printing again.

    If it persists, try resetting the following printing system and check if this may help you:

    * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

    Click on the Apple menu and then click on System Preferences.
    Select Print & Scan.
    Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
    Click OK to confirm the reset.
    Type your user name and password.
    Click OK. The printing system resets.

    Now add the printer by clicking on the sign more.

    Kind regards


  • Reference Dell 5130 has 3 light vertical stripes in the print area.

    The printer has three light vertical stripes which seem to affect all the colors too.  Place the solid blocks for each of the colors (red, yellow, blue and black) k each color block exihbits light strips on the left of the printed area, one near the Center and the other near the right side when printing with a margin of 1 ".  Changing the margins does not affect the position of the light areas, only if they fall within the print area or not.  When the background is white no line or band appears in this area.   Any thought as to the cause and the cure.  All consumables are reporting that they have at least 15% life left or more.

    I tried the 32-bit version of Windows XP and the 64 bit version of Windows 7, even documents printing same results.

    Problem solved, we can't assume that all users perform basic maintenance when you change toner cartridges.  Run the cleaning pad in each of the slots for each color, as shown in the normal maintenance and cleaning information.  This should have been made at least after every change toner because was not not like these residue accumulated on surfaces resulting scratches.

Maybe you are looking for