Lightning bolt on when the computer is turned off

Similar Questions

• Tecra A5 - charges the battery only when the computer is turned off

  Hello

  For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

  I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

  On the other hand, if I turn off the computer, the battery starts to charge.
  I replaced the battery a few months ago, so I think it's still OK.

  The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

  Thanks in advance for your contributions.

  > The charger is defective?

  Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

• The trash empties automatically when the computer is turned off. How can I fix it.

  The trash empties automatically when the computer is turned off.  How can I fix?

  The trash empties automatically when the computer is turned off.  How can I fix?

  Find what to do (something you installed and/or took the time and effort of installing) and undo - because it isn't Microsoft / default, or even something extremely simple (not something inadvertently, you can check, etc.) to (that happen.)

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Task failed when the computer is turned off

  In the computer I use at the office, I need to create a task in Task Scheduler to run every month on the first Monday of each month. And everything works fine, except when that day's holiday. The computer is turned off during the weekend and holidays.
  If this occurs. How can I force this task runs next time I turn on the computer?

  In the computer I use at the office, I need to create a task in Task Scheduler to run every month on the first Monday of each month. And everything works fine, except when that day's holiday. The computer is turned off during the weekend and holidays.
  If this occurs.  How can I force this task runs next time I turn on the computer?

  You're overthinking this problem.  Simply configure tasks planned to inform you of missed tasks .  If the date of scheduled backup has been a weekend or a holiday with the computer off, the next time you turn on the computer you will get a notification that "some tasks did not run."  At this time, manually start the backup job.

• calendar-clock does not retain the exact time when the computer is turned off

  original title: calendar-clock

  Clock only works when the computer is turned on.  It does not update the time.

  date does not update also. It is a program in windows vista.

  The year stay as the exact year, or back to a previous year, after restarting the computer?

  If the above applies:

  You probably have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• Backup cancelled in Windows 7 when the computer is turned off.

  I use Windows 7 Home Premium 64-bit operating system.

  Periodically, the Action Center will display a message saying that I have to do a backup, what I do before turning off the computer. However, when I reboot the computer, I discovered that the backup has been cancelled.

  I have searched the web but can't find information about how to make the computer shuts down automatically once the backup completed successfully.  Does anyone have a solution?

  The backup has been working in the past?

  Have you ever attempted an upgrade to Windows 10 and then back to Windows 7?

  For example let's say you have your backup scheduled task to run at midnight...

  If your computer is stopped at midnight, the backup does not - because the computer is stopped and the task was "missed" because the computer has been shut down.

  If you have the backup task configured on "Run as soon as possible after a regular departure was missed":

  

  When your computer working again missed backup task starts automatically.

  If you have your scheduled backup job to run at midnight and your computer is in "Sleep" mode, you have the task configured to wake the computer to run the backup:

  

  This won't work for wake up the computer if it is in "Sleep" mode  It will not work if the computer is in hibernation or if the computer is shut down.  As you can be awakened from sleep, the computer can be awakened from sleep, but you can't be awake if you're dead (stop).  You have to sleep to being awake.  You can be awake if you're dead or hibernation.

  The 'problem' with this approach is if the computer wakes up and runs the backup it will continue to function and you don't want that.   You can the computer to wake up, run the backup, and then click Stop (or to go back to sleep) when the backup is complete, and you can configure to occur in two different ways.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  If your computer is in hibernation or stop the scheduled backup will not work until the computer working again and realizes that he has missed a task... then the backup will run - if you have the task set to do as the first example.

  Depending on certain factors that have nothing to do with Windows there are ways to make your computer start at a certain time of the hibernation or shutdown (mean 23:55) so it will be quick and then the backup will take place at midnight but will continue to operate your computer unless you include an additional step to stop the system again when the backup is complete.  These things are not exactly automatically built into Windows, but there might be ways to do things the way it works.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  Find how to solve is often a matter of the question or stating the problem clearly there is no guess, no things difficult and none of these proceedings of the wild goose.

  What is the problem with the way your backup works now?

  What part doesn't work the way you think it should work?

  How do you think this should work?

  How it works?

  If your computer is turned off (off) do you want that it to wake up itself, run the backup and then stop when the backup he fill?  You can do it if you want, but it takes an extra effort and has a few requirements outside the Windows operating system.

  The task of the example above is set to run every Monday at 09:00.

  If my computer is running at 09:00 on Monday, the backup will start and run Monday at 09:00.

  If my computer doesn't work at 09:00 on Monday, the backup will run as soon as possible after the computer restart us and that's fine with me.

  I do not use sleep or Hibernate so I don't have to worry about how get the copy backup to run under these conditions.

• I have blue screen error and auto se when the computer is turned off.

  My laptop has this problem of blue screen after sometimes and also when I turn it it will be auto even if I do not turn on the power button.

  After reboot and come to the desktop screen, it will display the following Microsoft error message

  • C:\DOCUME~1\Bongoh\LOCALS~1\Temp\WERc9da.dir00\Mini060610-02.dmp
  • C:\DOCUME~1\Bongoh\LOCALS~1\Temp\WERc9da.dir00\sysdata. XML

  I search the files and the directory WERc9da.dir00\sysdata.xml and WERc9da.dir00\Mini060610-02.dmp, but they may not exist in the system even if I set to reveal the hidden file.

  This after I upgraded the family windows XP Edition with service pack 2. When he was still using the previous service pack thing like that happens

  Now, what is the problem and how to solve it.

  If you have installed WinXP SP2, you could not possibly have had a functional antivirus installed. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When the computer is turned off to stop is no longer the Vista 64 external USB Drive (SeaGate/Maxtor)

  Vista 64 - bit SP2. TB external Maxtor OneTouch 4 drive, worked well, now he wants to run continuously. The USB disk drive does not stop when I go through the steps to Remove material for it, then shut down the computer normally. Or the last step of the computer stops the disk external closing. Now the external hard drive keeps spinning, I don't know about the heads of read/write being parked or not and the white light comes on. This disk is used for the storage of photos; 30 backups; and several databases. I can't wait to have the drive platters turning 24 x 7, and I can't confirm that the read/write heads were parked safely. The error message associated with this question is below in bold. The player is now like the rabbit, continuous running.

  Diagnosis of Maxtor for this drive have been executed successfully.

  Maxtor check driver indicates that the driver is the most recent.

  Device driver Vista says the car is fine. I checked that the drive can read and write. Different backups have been recorded on this disc. I have not tried a restore because of this problem.

  Maxtor says that there is not any change in firmware pending for this drive.

  Seem like a command to close jammed somehow being sent on disk.

  Apparently the Maxtor One Touch USB Device, property, to optimize for quick removal of the external drive, you just completely shut down the computer and the external hard drive finished last (no need to use the hardware logic safely remove). The other option here is "optimized for performance (you must use the material logic safely remove) to turn off the player."

  These flags are defined in the Device Manager-online records-online Mass storage Drive L:

  Anyway, you try to stop the external hard drive, it will fail with the following error message:

  "Windows can't stop your 'Generic Volume' device because he's busy." Try again later. " Or a statement to this effect."

  The only software running when the error is Vista 64 bit and the logic of trying to stop the player.

  Thanks for any help you might be able to offer. Bill Sullens

  Hi Bill,

  Thanks for the detailed explanation

  I you suggest to activate the clean boot and then test to see if this works very well as expected

  Step 1: Put the computer in a clean boot

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Let us know if this helps

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows takes time to stop when the computer is turned off

  has had to reload xp without windows takes a long time to stop

  Hello

  Welcome to the Microsoft community!

  You re - install Windows XP and still have the same problem?

  During the shutdown of the Windows XP computer, it may take longer time to complete the shutdown process. Slow stops are caused a lot of factors. One of the causes is the clear pagefile at shutdown option enabled.

  Try the following steps:

  Use the Group Policy Editor

  a. Click Start, run and type in "Secpol.msc".
  b. click local policies | Security options.
  (c) in the right pane, set stop: clear the pagefile of virtual memory for people with reduced mobility.

  However, this setting is not the only cause of slow closures. No relevant programs and Services also contribute to slow closures.

  If the problem is seen recently after installing a driver software or third-party, try a system restore to see if that solves the problem of the slow stop.

  How to restore Windows XP to the previous step: http://support.microsoft.com/kb/306084

  I hope that helps!

  If you need further assistance on this issue or any related issue of Windows in the future please let us know.

• Microsoft ON essential to keep all the time automatically, when the PC is turned OFF? I don't know to do.

  Dear Sir/Mam...

  I installed Microsoft essential to protect my notebook of virus & spy ware. When I turn off my laptop sound off automatically. Please send me the details to keep essential Microsoft on all the time, even my laptop is OFF please. Icon for turn on essential Microsoft whenever I start my computer. I can't find the related parameters in the ICONS.

  Once a computer is turned off, it's... Well well, off the coast.  But not just asleep, off.  By the definition of 'off' it does nothing.  Microsoft Security Essentials is a program and only works when the computer is turned on, as all of your other programs.  You cannot run a program when the computer is turned off.  The good news is that a computer is turned off is completely protected against malware are malicious software programs and does not work either.  There is absolutely no need to have anything by protecting your computer when it is turned off.  That said, I think that your concern doesn't really MSE all the time, but that's automatically done already when you turn on your laptop.  Not to worry.

  You see the pop-up warning that MSE has not yet started Microsoft.  If you click on the Start button in the pop - up notification MSE should start (but not immediately).  It may take a minute or two.  If you wait just MSE must start with itself and the notice will go away without having to do anything.

  I see the same thing when I run one of my virtual machines that you see when you start your laptop.  I'm very familiar with it.  It goes away in a few minutes and only means that from MSE wasn't the first thing the computer did when I turned on.  Windows moves to finally start MSE, but you can the long hurry up if you want.

  To manually start Microsoft Security Essentials, find its icon on the lower right side of your taskbar (called the "notification area").  The icon looks like a Red House with an X on it.  Right-click on the icon and choose open on the pop up list.  The MSE window opens on the desktop.  Click on "Start it now" button in the window that appears.  The window fades.  It may take a little time to start the MSE.  When everything is OK, home in the notification area icon will turn green with a check mark.

  When I see the Red House, I usually just give the computer a few minutes to complete marketing and the problem goes away on its own.  On rare occasions I start MSE myself.

  Colin Barnhorst

• There are two screens (split screen) showing when the computer is turned on.

  There are two screens (split screen) showing when the computer is turned on. How can I delete one side to return to a view?

  Hi Ikthomas1,

  When did you start in this topic? Were there recent changes to the computer like installing new hardware, software or updates? If it is a recent issue, follow the steps in this document to perform a System Restore. This will restore your comuter up to a point located before the show.

  If you have antivirus software installed, run a scan of filling. You can also use Microsoft Security Essentials to scan your computer.

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.

• How can I avoid that Ginger Proofread starts automatically when the computer is turned on?

  I bought this program and you want to use it whenever I need to replay. But it always starts automatically when the computer is turned on, and because I sign, it restarts every 10 minutes after I killed him, asking me to connect.

  I can't find it in the start menu. Interface of the program itself does not give me an option to change the setting to start on demand. I wrote for the developer, no answer. I don't want to uninstall it. So, I wonder where I can go and change the setting?

  Thank you very much

  Yan

  Also look in the scheduling of the task to see if she herself put there.

  http://Windows.Microsoft.com/en-us/Windows/schedule-task#1TC=Windows-7

  See you soon.

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!