Lightroom Presets in LR 5.7.1 - worked well in the past, but now only some work still

Running LR 5.7.1 64 bit on Windows 7 Pro on a desktop Dell XPS-8700. My presets have done great since the beginning with LR 5.0 through the 5.7.1 set to level, but in the last 3 months, ~1/2 of presets no longer work. Even if you still see the name of the file, they are not available in the preset drop-down list. When I check the development presets folder, they are still there, but non-working color presets have changed from black to green. I tried to uninstall LR 5.7.1 and replace first by 5.0, then the versions 5.6 and 5.7 with no improvement. Also, I have a laptop of Dell 3540 on Windows 7 Pro and not have all these predefined problems. HELP PLEASE!

Please visit: [Fix] some files and folder display names in blue or green color in Windows Explorer - AskVG

Let us know the results.

Kind regards

Mohit

Tags: Photoshop Lightroom

Similar Questions

  • my printer worked fine in the past, but now when I try to print, it says document is in Quebec, but it is offline. What's wrong?

    my printer worked fine in the past, but now when I try to print, it says document is in Quebec, but it is offline. What's wrong?

    dougnatz,

    Try to run delete print jobs to remove all blocked the queue print jobs.

    Rick

  • I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a "file not found messages

    I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a ' file not found message.»  How can I go back in my files?

    There are a number of options available when you choose to import files to your catalog in Lightroom (library)

    1 copy / copy as DNG, this option allows you to copy files of origin from their existing location, for example a folder on an existing, promenade, internal, external, a reader of card or a camera SD card connected to the computer via a USB port, to a location of your choice, in a folder of a HARD internal, external HARD disk drive or a network drive on your choice.

    2. move. This option allows you to move files of origin of their location, for example a folder on an existing drive, internal or external to a new location of your choice, in a folder of a drive HARD internal, external HARD disk or a network drive on your choice. (the Move option you cannot move files from a card or your camera.)

    3. ADD., this option allows you to add image files to the catalog of their location, for example a folder on an existing drive, internal, external or network drive and the original images remain in their current location.

    The original image file will be located at the location of your choice.

    There are no image files in your catalog (or library) file the original files are in the location you choose.

    If you choose to add files to your catalog from an external drive, then unplug the player from your computer, then Lightroom which will show the 'file not found '.

  • Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

    Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

    It is an Apple problem. They obviously fixed with a change to iTunes. Download the update on their part.

    HAL

  • 6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

    6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

    My computer is a PC with Windows 10.
    Everything worked well before the Update Adobe Lightroom 6.
    The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?


    I apologize for the inconvenience.

    Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.

    We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.

    Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows

  • Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

    Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

    I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
    I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.


  • The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

    Original title: the headphone volume

    How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

    Hello
     
    1. who is the operating system installed on the computer?
    2. What is the brand and model of headphones?
    3A this works much earlier?
    4. What is the brand and model of the sound card?
    5. have you ever tried to play the Audio using different media player applications and check?
    6. have you tried to connect the headset to another computer or phone and check if it works well?
     
    I suggest you follow these methods and check.
    Method 1: Run the audio troubleshooter.
     
    Method 2: Set the earpiece/microphone as default device and check.
     
    a. right click on the volume icon in the system tray at the right corner on the desktop.
    b. Select the playback device, go to torecording tab.
    c. make a right click and headphone/microphone as the default device.
    d. click on apply and ok.
     
    If above steps fails, proceed to method 3.
     
    Method 3: I suggest to disable the improvements and check.
     
    a. right-click on the icon "speaker" at the bottom right of the screen.
    b. Select "playback devices".
    c. right-click on the helmet.
    d. Select Properties
    e. click improvements
    f. check Disable all improvements
    g. click OK
     
    You can read this article for more information:
     
    Tips for solving common audio problems

    You can also contact the manufacturer of headphones and check.
     
    I hope this helps!
  • I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

    I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

    It is the nature of the movieclips. They play only when you make a film Test. If you want an animation that plays when you scrub the timeline, select the element and change it to be a chart instead. You can do this in the properties panel.

  • Hi hope someone can help? I have acrobat pro, 6 have worked well for the past two years but then just stopped working. Have reinstalled but still won't open, ronning windows 7. Help please!

    Hi hope someone can help? I have acrobat pro, 6 have worked well for the past two years but then just stopped working. Have reinstalled but still won't open, ronning windows 7. Help please!  Janice

    Hey janicem42177174,

    Adobe does most support the installation and use of Acrobat 6 because it is a very old version that is not compatible with Windows 7.

    I suggest you to please use the latest version of Acrobat 11.0.10 is perfectly compatible with your operating system with its functions and improved functions.

    You can download a free trial version of 30 days of Acrobat from here:

    Download Adobe Acrobat free trial | Acrobat Professional XI

    Let me know how it goes

    Kind regards

    Ana Maria

  • 2nd WVC54GCA works very well on the LAN, but I don't see it on the internet

    I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.

    Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc.  I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.

    Am I missing something here?

    What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.

    Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.

    Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.

    In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...

    My $.02

  • Works very well in the Simulator, but when it is installed through the Desktop Manager questions

    OK so as well Hello world and production apps work correctly on the Simulator... I had some advanced api like blackberry.identity but I removed it because he yelled at me for code signing... I removed the advanced permissions but usually always open... I can see the application in the list of downloads, but clicking nothing

    I tried with the sample application engines and the same thing... click on the application icon, but nothing happens...

    Once again any word on sim and no not use any "features" except the blackberry.ui (on production app)

    blackberry 9630 tour

    Thanks for your help!

    All the BlackBerry Widgets require the signature, even if you are not using a single line of JavaScript.

    The software BlackBerry Widget SDK generates the Java code required to create the widget.  The display of web content in a Java BrowserField, which requires a signature.  Therefore, all the widgets must be signed.

    Code signing keys are usually issued within 2 days of the order, but may take up to 10 business days.

  • works very well on the shell, but not via cron

    Hello

    the ghettoVCB works pretty well on my vShpere 4.1 Standard Server run from console. My setup looks like this:

    vms2backup.conf: listed three VMs to backup

    I have a config file for each virtual machine. That looks like this:

    VM_BACKUP_VOLUME = / vmfs/volumes/VMBackup
    DISK_BACKUP_FORMAT = thin
    VM_BACKUP_ROTATION_COUNT = 3
    POWER_VM_DOWN_BEFORE_BACKUP = 0
    ENABLE_HARD_POWER_OFF = 0
    ITER_TO_WAIT_SHUTDOWN = 3
    POWER_DOWN_TIMEOUT = 5
    ENABLE_COMPRESSION = 0
    ADAPTER_FORMAT = ide
    VM_SNAPSHOT_MEMORY = 0
    VM_SNAPSHOT_QUIESCE = 0
    ENABLE_NON_PERSISTENT_NFS = 0
    UNMOUNT_NFS = 0
    NFS_SERVER = 172.30.0.195
    NFS_MOUNT = / nfsshare
    NFS_LOCAL_NAME = nfs_storage_backup
    NFS_VM_BACKUP_DIR = MyBackups
    SNAPSHOT_TIMEOUT = 15
    EMAIL_LOG = 1
    EMAIL_DEBUG = 1
    EMAIL_SERVER = mail.domain.com
    EMAIL_SERVER_PORT = 25
    [email protected]
    [email protected]

    The NFS part is not necessary.

    I start backing up shell like this: /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log

    When from the backup of shell as mentioned above, everything works fine. In the end, I get an autoresponder email.

    But now, when I call this script with the same syntax via crontab, only the first two servers when saved and the script stops until the number of rotation shall take effect from the second server. If the third server is not saved and no e-mail is created.

    I have no idea until the problem could be. The hard disk is not full.

    Any ideas?

    Regards Wolfgang

    You can proceed as follows, re - run the script via cron but in your crontab entry, have it configured as follows, where you hit an error that is not connected:

    /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log d debug - c /ghettoVCB > /ghettoVCB/ghettoDebug.txt

    It will redirect all the outputs generated during the race in /ghettoVCB/ghettoDebug.txt and see if there are errors.

  • How can I open a photo from lightroom 4 elements 11?  What I've done in the past doesn't work now

    I just got photoshop elements 11 and when I try to open a picture with lightroom (4) adjustments, lightroom makes a copy, but then it does not appear in the elements (11).

    In the Lightroom library click on Edit > preferences > external editing

    Make sure you link the application and not a shortcut.

    Windows:

    Mac:

  • F4580 works very well from the laptop but when I try to print something from mobile internet is blurry?

    Have run the HP Diagnostic print comes very well, very good copy.  The only problem is when I try to print something on the internet and then it's so blurry that it's barely readable.

    Hello Ann,.

    Allow me to quickly gather information about the issue in order to guide you in the right direction.

    1. what version of Windows is installed on the computer?

    2. what web browser do you use to print from the internet?

    3A this works much earlier?

    4 have have there been recent changes made on the computer before the show?

    I suggest you to refer to the links and check if it helps.

    Problems printing from the Internet

    I can't print or preview before printing a Web page in Internet Explorer

    Printing webpages: frequently asked questions

    Please post back with the results and we will be happy to help you further.

  • Acer Predator G6-710 BSOD works well after the connection, but...

    Hi I'm new to the forum.  My question is that if someone else got some error checking to restart error and if so, how to solve it.  I'll share the info I get from Whocrashed from the dmp files.  I am running windows 10.

    ------------------------------------------------------------------------------------------------------------------------------------------------------------------- Crash dump directory: C:\WINDOWS\Minidump

    Dumps are enabled on your computer.

    Tuesday, October 4, 2016 05:25:53 GMT crashed your computer
    crash dump file: C:\WINDOWS\Minidump\100416-3984-01.dmp
    This was probably caused by the following module: iccwdt.sys (ICCWDT + 0 x 7838)
    Bugcheck code: 0xD1 (0xFFFFF80746167838, 0xFFFFF80746167838, 0x2, 0 x 8)
    Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
    file path: C:\WINDOWS\system32\drivers\iccwdt.sys
    product: driver Intel® Watchdog Timer (Intel (r) WDT)
    company: Intel Corporation
    Description: driver Intel® Watchdog Timer (Intel (r) WDT)
    Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: iccwdt.sys (driver Intel® Watchdog Timer (Intel (r) WDT), Intel Corporation).
    Google search: Intel Corporation DRIVER_IRQL_NOT_LESS_OR_EQUAL

    I can't connect to my desktop and everything works normally.  But when I leave my computer alone, if I run a game or not, and no one touches, it displays a blue screen with the error above.  Does anyone have a solution?

    OK, but a week later the same problem occurred.  This time I retried the search google for anything whatsoever.  I managed to find the message with a driver who has a problem of "overclocking".  I went to the Acer website and went to the drivers.  I thought I had them all, but I missed the chipset driver.  Now, I got the BSOD when I updated and since then, I have not had a crash.  I hope that this help anyone having the same problem.  And thank you to everyone who has helped too.

Maybe you are looking for

  • Laptop HP pavilion 15-e015tx: error after recovery

    I was faced with an error when turn on PC, so I called HP support and they sent me 3 recovery disks. and I did the whole recovery process according to them. but when my pc restarts after recovery happens a screen to install the software from 1 h to 2

  • message repeated on Hotmail "" but you must first install the latest version of Microsoft Silverlight ".

    Original title: problems with the installation of silverlight Here's what I'm getting it quickly "but first of all, you need to install the latest version of Microsoft Silverlight". so I install this & go to see the slideshow of pictures to hotmail &

  • OfficeJet 8500 A909a: Drivers won't load not

    I try to install my Officejet 8500 A909a (that I have connected to my wireless network) on my laptop. I go to the tab drivers and software, select the correct printer, and brings it to the top of the page where it is supposed to compile the list of d

  • Photos from the desktop icon

    I'm adding shortcut icons on my desktop and I would like to change the image.  At present, they are all links to Web sites, but at some point I'll add shortcuts to tutorials created in word, powerpoint, etc.. Can you please tell me, step by step, how

  • Fault bucket 0x23_Ntfs. NtfsDeleteSch + 1f4, type 0

    I had a blue error screen twice in a few months.  Each time, diagnostic tests has come and the notebook has restarted the next time.  I was not installing additional equipment/programs. instructions for reporting on the problems and solutions got me