Lightroom will not change since the last update in Photoshop or OnOne

Similar Questions

• My iMac will not close since the last update

  Since the last update for El Capitan, my iMac does not stop and I hold the power button so he can close. Has anyone else had this problem? I'm nervous to download the update on my Macbook pro in case the same thing happens. Also has anyone had a solution.

  Uninstalling the Wacom software.

• Default brushes will not load since the last update: How can I solve this please?

  Everytime I open Photoshop I get the message: "could not load the default brushes because the file is not compatible with this version of Photoshop. It became a problem because I downloaded the latest updates for the package of the Photo. Please can someone advise me on how to solve this problem.

  Good, great to hear that solved your problem. Please check back...

  Benjamin

  PS If you are satisfied with the answer, remember to mark (solving answer) correct. This marks the problem solved and will help others to find solutions to similar problems. Note: you must be logged in to the forum.

• Since the last update to Photoshop lightroom when I import images come up black after import, what's the problem?

  Since the last update to photoshop lightroom when I import images they come black what is the solution to this problem?

  Hi sabina_arslan,

  Please follow the steps below:

  1. Disable apply tone controls auto under Lightroom preferences > Presets tab
  2. Restart Lightroom and then import images again.

  Kind regards

  Claes

• Why my FireFox went painfully slow/Not responding since the last update?

  Since the last update Firefox doesn't want to just not worked for me, most of the Web pages take 20 to 30 seconds to load, and often it will simply not respond and take a minute to load, and when he does have a script error that for google images will forget this topic well in 2 minutes after the message not responding is finally going to my brother also uses Firefox and his works perfectly fine, I disabled all addons and it's the same thing. If I use another browser (Chrome) is super fast, I tried a few suggestions for other positions like firefox high priority and such there is little difference if all don't please makeme use chrome

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• British English chosen for keyboard but my @ above the number 2 has changed "since the last Update. He want to come back...

  Since the last OS update two or three days ago my pre-selected keyboard has changed.  They keyboard watch my @ sign is greater than the number 2 - and it has always been up to was last updated.  Now he has changed places with the "display sign beside the semicolon key.;  I have UK chosen as my favorite keyboard, but this seems to be too governed by something else. How can I fix this to what it was?

  If you go to System Preferences-> keyboard-> input methods is your keyboard the value 'British' or 'British PC?'

  I ask that the keyboard layout of the standard British PC has quotation marks ("") above the 2:

  

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Many aspects of the system have been changed since the last update

  My Windows 7 Ultimate did an update this morning at 03:00. When I woke up and went to my computer at 6:00, I noticed a lot of things have changed. All my settings are gone. All my passwords are gone. All my files on my desktop disappeared. All my themes Aero disappeared. All my email settings (Eudora OSE) have disappeared. My preferences folder disappeared.

  It is as if Windows 7 is returned to the original installation and you will have to start all over again. When I go to programs, it seems I have not lost anything, just the folders on my desktop which had shortcuts is gone. When I go to desktop customization, all themes that I had loaded down disappeared.

  I had created a restore point yesterday. It's over. This morning, the update created a restore point. I could guess the use this restore point, but will not be my system try to rerun the update? I just live with it and try to implement brand new? Don't they test these updates before release? Very frustrating!

  Hi TheFox22,

  There are several things that interfere during the installation of Windows update and cause a few problems.

  I suggest that you perform the restoration of the system to the point that was created before the updates were installed.

  If you want to install the Windows update again, you will need to disable the security software installed on the computer and also the third-party program installed on the computer step called clean boot, it's to stop their interference during the installation of the update of Windows.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  I suggest that you put the computer in a clean boot state and then go to Windows update and install all available updates and check manually.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creative cloud does not start since the last update (3.4.1.181)

  Since the installation of the version 3.4.1.181 CC would no more launches.

  When I click on the CC icon, I see that the wheel that turns for a few seconds then... nothing.

  If I try to check the lightroom updates: same behavior.

  My pc is running windows Version 10 1511.

  Am I the only one having this problem?

  Boris

  Thanks for your reply.

  My problem is now solved. It seems that this was due to an incomplete installation of the updated version of the CC. After the update, I had two versions of the CC on my PC, none of them work.

  I don't know why the installation did not finish.

  In any case, I downloaded CC of the Adobe site, as if it were a first installation. This new facility has solved the problem.

  That being said it seems that the update process is very robust.

  Best regards

  Boris

• App Keynote iOS does not work since the last update

  App Keynote has been updated in May 10th but never completed installation. I tried to uninstall it but when I impulses the X button, nothing happens. I restarted my iPhone but Keynote does not open and I can uninstall either. The icon is now hidden

  

  Hello

  I guess that you do not have a computer

  Launch iTunes and connect the iPhone to a computer.

  Click on delete > > Sync > > apply.

  

  Keynote address will be deleted from the iPhone.

  Back to iTunes on the computer and try again to install Keynote.

  Click on install > > Sync > > apply.

  

• 6 Lightroom does not start after the last update of victory 10

  Hello

  After installing the latest updates of victory 10 yesterday my 6 Lightroom won't start no more. I tried to reinstall, fact the renaming of files SLCache and SLStore, past all antivirus and firewall off the coast. No results on the start screen, I always get a pop up saying that LR does not work properly because of the problem and that patients be informed as soon as there is a solution. It stops...

  Can someone help with this problem?

  Hi jensk

  Name the module fehlerhaften: ig7icd64.dll

  Update your graphics card driver.

  ig7icd64.dll crashes due to a deprecated module / driver for your graphics card

  Concerning

  Assani

• Lightroom will not change to the private collection

  I have a collection that I made public and then tried to change to the private sector.  When I click on the "Make private" button, I get a message that the collection is now private.  However, the link remains and the button still says 'make private '.  Whereas it should change to 'Go Public' and the link should disappear.  When I click on the link, the browser opens and gives a 404 error code.  How can I fix it?

  Open the creative cloud desktop application and update that.

• Google does not work since the last update of Firefox 13.

  Well since Google Update doesn't work for me, but it works in Chrome and Internet Explorer, get this funny page of coils as text. Here is a screenshot. the link text

  Seems like a good old re-boot sorted, spirit of always weird error.

• part 3D plug not visible since the last update PS CC 2015.5

  This week, there was an update on PS CC 2015.5 and I can't find my plug ins (part 3d) any more linke Piccure + / Nik plug / Alien skin

  Have you installed them in CC 2015.5? Third party Plug-ins are not migrated by 2015 CC to CC 2015.5 Adobe, you must install and then new versions of Photoshop.

  I also read that the Nik brushes do not work in CC 2015.5.

• My LR catalog will not be open since the last update

  Since the last update of creative cloud, I opened my LR catalog.  I have a PC running Windows 10.

  When I click on LR, a box pops up that says "the catalog could not be opened because of an unexpected error."  Then I have the choice to open a different catalog, or to create a new.

  I tried several thing:

  -J' selected ' create new ' thinking I could maybe create a new catalog, and then import the old.  LR refused to open the new catalog.

  -J' tried ' to open a different catalog.  I unzipped my last backup in a new folder and tried to open it.  I got the same error.

  I am at a loss to know what to do.

  Help!

  LR to uninstall then reinstall. Your catalog is a file separated which will not be deleted or altered in some way by doing this.

  Also default LR backup the catalog file once every week, unless you changed this setting normal or continuously select the jump key, unless you so a backup of the file catalog which has only 6-7 days.

  It is more than likely to a permissions problem that was caused by the update of Windows.

  To uninstall open office creative cloud application and uninstall it from there. Restart the system, and then reinstall from the same application.

  Or once uninstalled, you can go here to get the original version of LR 2015/6 and then apply the 2015/6.6.1 update.

  Install Photoshop Lightroom

  Download the original version and then jour.6.1 updated manually. LR CC 2015 and LR 6 are the same exact program and the difference comes from how you're signed in. So don't be confused if all you see is LR 6.x.x on the download link.