LightScribe drive

Similar Questions

• "DVD SuperMulti LightScribe drive / burner" not recognized as LightScribe drive

  I've had my desktop PC HP Pavilion Media Center TV m8100y CTO for several years now, but I've never tried using the LightScribe feature to date. I downloaded the drivers and software from [link removed - site is no longer available] newer, but none of that recognizes the "LightScribe DVD SuperMulti Drive/writer" (TSSTcorp CDDVDW SH-222BB) as a LightScribe drive. What should I do to diagnose and fix the problem, so I can use the LightScribe feature?

  After looking in the system recovery, I don't think I'm going to run until my PC has more serious problems than the issue of LightScribe. The recovery process of the system to the factory settings and then reinstall everything new is a bit more than I want to go at this point. Thanks anyway for the help, old_geekster. I'm OK with the mystery of LightScribe remaining unsolved for a little longer. When I get to perform a system recovery, I will update this thread with the results regarding LightScribe.

• LightScribe software does not recognize my DVD LightScribe drive. Can help any one? __

  LightScribe software does not recognize my DVD LightScribe drive. Can someone help?  I belive what happened after I enstalled Windows 7!

  Have you installed the latest http://www.lightscribe.com/downloadSection/windows/index.aspx?id=810 Lightscribe system software

• dvd - rw LightScribe drive

  Hi guys, I have a dell dimension 3100, I thought replacing the drive of dvd - rw with dvd - rw sata lightscribe duallayer player. will work from the ok sata drive in my computer, if yes is just a mater of take the drive and put in the sata lightscribe drive. any help would be great thanks...

  
  

• Adding a lightscribe drive

  Will be a HP DC7900 Lightscribe DVD - RW burner SATA drive DS-8A2L-TC-2 fit 485603-001 in extra Bay and work in my HP ENVY h8 1500v? I don't have a clue myself and I don't want to spoil. And 64-bit windows 8 is the operating system.

  Hello

  Based on the following link, the case 2 bays of 5.25 "ODD (optical disc drive) so there's enough room for an ODD addition, in short: you can add the DC7900 player on your computer, it will fit.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=5330773&prodTypeId=12454&ObjectID=c03666767

  I hope this helps.

• Dysfunction of the LightScribe drive

  The Light Scribe DVD Super Multi drive on my HP Pavilion doesn't read any disk. It opens and closes, and when I tried to use it, it tells me that there is no disc in the drive.

  Hi Jorge,.

  ·          Was the CD/DVD writer works much earlier?

  ·          What is the exact error you get when you try to use the CD/DVD burner?

  Method 1

  If you have any third party present on your computer CD/DVD burning software uninstall them temporarily and check.

  Method 2

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drive LightScribe electric power plug

  I n an HP Pavilion Slimline s5122f. My lightscribe drive has stopped working properly. It is impossible to reach the correct rotation speed. I bought a new lightscribe drive to replace it. However, when I opened the box of the new command, I was surprised that the white cube at the entrance in the supply (next to the Sata connectors) cable was not there.
  
  Does anyone know what I mean? Am I supposed to remove the said my current lightscribe drive and drop it on the new drive?
  
  Please help, thanks.

  I'm sorry feel you the way you do and think that I don't understand. However, I completely understand what you're asking, and that's why I asked for full names of brands and model numbers of readers and close-up photos as well.

  Yet once, referring to the guide of HP 'replacement of a CD or DVD disc' for your specific computer, you will notice that "Step 3"shows a picture of the back of a CD/DVD drive with a description of each connector;

  1 - eject or control cable (not available for some readers)
  2 - power cable
  3 - data cable

  

  NOTE: Your car may have three or two cables. Ejection or control cable may not be available if the drive does not require cable.

  This image is identical to your original factory drive as shown on the "side-by-side photo Note Although on your photo, two readers of CD/DVD 'SATA Data (S1 - S7)' and connectors "SATA Power (P1 - P15). This is all that is required to use the CD/DVD drive. The semi-cable optionally connector 'Eject or control' is used on some HP Slimline models to eject the drawer and is connected to the "Eject" button that is directly under the CD/DVD drive. While it would be nice to keep this feature, it is not necessary and does not support this option in your case not available as long as the new drive.

  To eject the tray CD/DVD without the 'Eject', left click the Windows button "Start ORB" at the bottom left of the screen, left click on 'Computer', the 'DVD - DW drive"do a right click and left click"Eject ".

  Please send Bravo

• LightScribe CD and DVD-use of permanent markers

  I don't have a LightScribe drive on any of my computers but some LightScribe CDs and blank DVDs.  Can I use a permanent marker to label these disks?

  You can write to cd light scribe with perm. marker

• LightScribe CD not recognized

  My father has an old pc with windows xp top and lightscribe, and I recently bought 100 HP lightscribe CD.

  When I insert the lightscribe cd, I get an error message saying: he can not read the cd (it does not recognize that the cd is a lightscribe cd). I've updated the lightscribe driver, so this isn't the problem.

  What should I do?

  and no cd is not face down...

  We will discuss this, Ok?  What is the exact model number or the product number for the old WIN XP to the computer.

  You can verify that it is really "Lightscribe"?   To verify that the LightScribe disc, download and load 'Burn Image'.  Selest drive Tools tab, then capaabilities.  A look on the right for lightscribe pane. Is he "checked".

  Why are you ready do not want to use it, in my humble OPINION.

  (1) intensive process that significantly shorten the life cycle of the laser engraving. (Here, was to replace disc).

  (2) November 26, 2013, LightScribe HP official site has been deleted. This has been replaced with the following message:

  "Thank you for your interest in LightScribe disc labeling technology. This site is no longer active. LightScribe disk and software utilities can present themselves on a number of public websites. »

  (3) the surface of a LightScribe disc is coated with a reactive dye that changes color when it absorbs infrared laser light 780 nm. The engraved label will show no visible fading under exposure to lighting inside for at least two years

• HP G62 DVD - RW w / LightScribe upgrade to a Blu - Ray player

  Is it possible to update my current DVD - RW with LightScribe to a Blu - Ray Disc with LightScribe drive?  What do I need?  Any help would be appreciated!

  Hello:

  Here is the link to the service manual for your laptop:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02542455/c02542455.PDF

  Please see Chapter 3, page 3-8 for the available Blu - Ray discs with reference corresponding HP numbers.

  The player you get depends on what color is your laptop.

  Paul

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• my dvd/cd drive is missing... help!

  I have a hp Pavilion 6500 laptop w / a cd/dvd lightscribe drive. The problem is that the computer no longer recognizes. I tried every patch and driver, download softerware I can think and nothing works. He always ends the same, "no disk drive not detected. Can someone please help me and let me know what to do?

  Check in the Device Manager, marks of yellow warning?

  Regarding each patch and driver, drivers for your laptop are taken from HP site and nowhere else. Cd drivers are part of the chipset drivers

• Slimline drive replacement DVD s5-1204

  I was disappointed to find that the standard DVD player doesn't have Lightscribe support. I saw in the guide of upgrade there are 3 cables to the DVD player. My old Lightscribe drive has only 2 cables (SATA and power). What is the third cable? Can I trade in my old drive without the third connection cable?

  HP slimline computers use a special CD/DVD player that has a third cable not found on standard disks. The three cables are power, data and ejection. You may be able to adapt a standard disc in the slot, but he won't go without cable to open/close eject when you press the eject button on the computer.

  Frank

• Software to burn Lightscribe labels?

  When I bought a HP dvd1040 Lightscribe Drive for my old system, a copy of Nero Essentials has been included. When I upgraded to version 7, I couldn't find an option to create a Lightscribe label.

  Software Nero has proved to be difficult to get the installed proeprly and there is no free support. In fact, their support was very good at all. He was on the upgrade and spend more money for bloatware.

  Can anyone recommend some software of labelling with features more that basic (for example, was provided with my HP a6700f computer)?

  The HP LightScribe Toolbox version is not very complete.

  However, I found the full version of LSTB online for only $17 .00US for the downloaded version.  It is intended especially for LightScribe labels and gives a lot of options for graphics.

  I highly recommend that and you can find it at www.lightscribetoolbox.com.

• CD/DVD LightScribe burner

  I have a 2B09WM of 2000 HP 15.6 "and a 2000 HP 416DX laptop 15.6 im trying to find out if theres a HP Lightscribe CD/DVD drive that will be adapted to the thesis of laptops models?  If yes that maybe on the drive model number?

  Hello chulai6566.  I understand you're wondering if your laptop has a Lightscribe drive option.

  I took a shot of the laptop Service and Maintenance Guide , and the optical drive (page 40) section says that there is a DVD-RW/CD-RW Lightscribe drive with a part number 646126-001.

  You should be able to order that part through HP parts Surfer.

  Have a great day.