Limit bandwidth for VPN users

Similar Questions

• ASA does not propagate any routes for VPN users

  Good afternoon

  I m a problem concerning the spread of the roads to authenticated VPN users through the asa tunnel-group.

  I have a VPN-users-pool where my users receive their IP address, and after authentication and the tunnel is established the idea is that the user get to the networks defined in the following ACL:

  access-list within the standard allow 10.1.0.0 255.255.0.0

  access-list within the standard allow 192.168.15.0 255.255.224.0

  Now, the problem is that, after the tunnel is set up the only way, that the user receives is the default route (which is not supposed to be sent). The user does not receive the roads specified in the ACL list above. It has not received the network mask and assumes one 8 netmask (given that the pool of network from where it receives the IP address is a class A network).

  Network routing works as expected (when I add the static routes directly to PC users, everything works OK). It s just the matter of the ASA do not spread the roads as it should.

  Here is my split tunneling settings:

  attributes of Group Policy DefaultRAGroup

  VPN-idle-timeout 1

  Protocol-tunnel-VPN l2tp ipsec

  disable the PFS

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  (...)

  attributes of Group Policy DfltGrpPolicy

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  (...)

  Any ideas?

  I have apreciate your help

  Best regards

  Just a question, I see:

  attributes of Group Policy DefaultRAGroup

  Protocol-tunnel-VPN l2tp ipsec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value inside

  internal DefaultRAGroup_1 group strategy

  attributes of Group Policy DefaultRAGroup_1

  Split-tunnel-policy tunnelspecified

  It looks like your policy

  DefaultRAGroup_1 you set ACLs and the other doesn't seem to be for L2TP/IPSEC. How do you connect to the ASA, using L2TP/IPSEC or Cisco IPSEC client? In addition, if your users are devoted to this group policy:

  DefaultRAGroup_1 it looks like the acl is missing for the split tunneling

• Download ACL for VPN users. ACS 4.1 & 1841 router

  Hello

  I have configured the router 1841 as a VPN server. All VPN users get authenticated using RADIUS ACS 4.1

  I need to apply downloadable ACLs by user.

  I configured the Downlodabale ACL ACS. Same ACS event report shows that the ACL is applied to the authenticated user, but traffic is not blocked or past accordingly.

  What is your configuration?

  I think that the more easy to do is to use IPSEC TIV in interfaces, as well as the aaa authorization network and on the radius server, use ip:inacl to the cisco av pair, as

  IP:inacl #1 = permit tcp any any eq 80

  IP:inacl #2 = permit tcp any any eq 443

  ...

  Some documents:

  http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t14/feature/guide/gtIPSctm.html#wp1090634

• Doubt on the RA aaa using ACS 5.3 vpn user

  Hello

  I'm putting in place of the VPN on 8.4 ASA with 2 - VPNGp1 and VPNGp2. VPNGp1 groups users will access 1.2.3.0/24 and VPNGp2 users will have access to 5.6.7.0/24. User authentication will be done using RADIUS 5.3 ACS.

  On ASA, I configured pools VPN groups, ACL of VPN, IP, tunnel of groups and group for each group strategies.

  GBA, I created vpn-user1 and user2-vpn for each of the 2 groups.

  I don't know if some configurations more must be done on ASA and AC... Do I need to add new users - vpn-user1 and user2-vpn - on ASA, under each corresponding group policy, using the command political vpn-group?  Or I need to do something else on the ACS?

  Finally, how can I configure authorization and accounting for VPN users? I have to do this on GBA or ASA?

  Please advice.

  Thank you.

  Hello

  Authentication using radius aims to centralize user accounts and policies so that you will not have to configure these on the SAA. You must create a group of authentication servers that points to your ACS, then you will have to refer to this group of servers to your tunnel-group for user authentication queries will be forwarded to ACS for authentication. For accounting you will create an accounting server group and also assign to your tunnel group configuration.

  The GBA, you will need to create a network client that is ASA, and the shared secret will be the same. You create an element of authorization policy network who have the permission settings, or you can choose allowed access, which allows authentication succeed without any special authorization.

  You can debug the sessoin using crypto vpnclient 255 debugging to view the authentication stream.

  Using SSL vpn (anyconnect) for these sessions?

  Thank you

  Tarik Admani

• Limit the bandwidth for WNR614 router n300 wireless devices

  Hello

  I use the WiFi WNR614 N300 router. Is it possible to limit the bandwidth for devices that are connected on it.

  I thank you,

  Vignesh C

  Hi @vic2408

  Welcome to the community!

  To answer your question, there is no way to limit the bandwidth on each of the devices.
  You may need to use a 3rd party software to do this.

• Is RV320 - possible to use the RADIUS for the users of PPTP VPN?

  We replace a Draytek with a RV320 router and have trouble with the last step which is the VPN configuration. We currently have our VPN users defined in a RADIUS server, and the Draytek check credentials against this. However, the RV320 doesn't seem to work in the same way - the server RADIUS is configured but VPN users cannot connect. There is nothing in the system log to indicate if there is a problem connecting to the RADIUS server, or if the router is even able to use RADIUS for PPTP connections. Adding a user manually allows PPTP connection so I don't know the PPTP settings on the client are correct, and that the PPTP on the RV320 server is functional and configured correctly.

  RADIUS authentication should not work for users of PPTP then I could set them up manually, except that the web interface of RV320 has a restriction on the length of usernames - it seems to allow only 11 characters, where I would need to have user names up to about 15 characters for some of our remote users. Why the RV320 have such a length short maximum username?

  Dan

  Dan,

  I got the feedback from the engineering group. Even if she has the RADIUS as a drop-down option, the PPTP server only supports local user database authentication. I was wrong in my first answer. They confirmed THAT SSLVPN & Easy VPN will support RADIUS but not installing PPTP.

• NAC Appliance with ASA (for remote user VPN)

  I have a pair of firewall 5520 cisco which is used as a VPN gateway (for remote user VPN) and perimeter firewall Internet (to provide outbound internet connectivity).

  We allow the NAC to remote VPN users. I have it will be deployed with active 3 layer inband.

  The problem with this design is that how to ensure that outgoing internet traffic does not pass through the CASE?

  I heard about couple of optioins:

  -ACB (for send only IP subnet to VPN users remote to go through CASE)

  -Version 8.x characteristic of ASA (Restrcit access to VLAN under Group Policy).

  I intend to do with ASA firewall where I can set a new subinterface on the SAA (with a new tag VLAN) and under the group policy for remote user VPN, I select the option to "restrict access to the new VLAN.

  My question is: is - it still works (even if the firewall have a route to the internal network by using the 'inside' interface and NOT the new interface of the NAC). If this does not work, please let me know what are the other options for this type of deployment.

  Thanks in advance.

  Hello

  It should work. Please see the attached PDF for more clarity on this topic: https://supportforums.cisco.com/docs/DOC-9102

  HTH,

  Faisal

• Ask/dissemination of certificates for IPSEC VPN user

  Hi all

  I have therefore an ASA established the connection to an LDAP, an SSL certificate signed for the cert of the device and use IPSEC IKEv2 VPN connections that are authenticated by the LDAP username and password and X.509 certificates.

  I have a CA server root of Microsoft Windows server 2012 (State in offline mode) and a Windows server 2012 subordinate certification authority server. Both are 10-year Certification authorities.

  To generate certificates VPN I'm going to the AC Sub, go to certificates (local computer) > personal > right click on the white space > all tasks > advanced operations > ask personalized.

  I have set up my cert accordingly and enable private key export.

  I submit new request to the CERT service. authority on the CA of Sub (same machine as before). I issue the certificate, and then export the certificate with the private key. I send this to my user, then they install this certificate in the personal certificates store and access the VPN access using this cert more username and password they have been assigned (no there is no possibility for them to ask their own PC)

  Question 1: Is there an easier way to do this? Command line? Script? preconfigured with the certificate settings .ini file?

  Question 2: These certificates are only 1 year. How can I generate certificates that are longer than that. I'm jumping for 3 years.

  Thank you!

  BROKEN

  Well it's quite simple setup-wise when you chose to go down the path of the client certificate. It is generally easier to use SCEP (Simple Certificate Enrollment Protocol) Protocol to manually deploy certificates. There is an example of a configuration Definition here.

  There is also a good presentation (or several) of Cisco Live. I recommend that you take a look at this one from 2012: Practice of PKI for VPN.

  In this presentation, he you (slide 39) specifically shows how to create a new certificate template and set the validity period for the value by default 1 years.

• MAR for VPN GBA 4.2 users

  Hello

  I use ACS 4.2 in my setup. We have my company VPN users. Authentication of the identity of the VPN users are currently happenning by ACS and AD. I want users to connect to VPN should be used that company provided laptop computer. That's why I want to impliment MAR who will verify the name of the computer in AD and if the computer name is in the computer to ad group then only his user ID and the password will be validated and based on this validation, the user will be allowed to access network resources. Currently I do not have any server certificate and users can connect to any cmputer VPN (Home computer), just using their login and password.

  All the paper I described x client about 802. 1 with the authentication of certificate through Mar.

  Please help me to achieve this requiremnet. I want without any certificate when a user wants to connect to the VPN its system name is validated through ACS & AD Group, then after username password verification will occure.

  Please help me...

  Satya,

  You cannot apply the MAR for a scenario of remote access since MARCH in the realm of GBA is for customers who are destined for switches using a supplicant and dot1x. In this case using a vpn client and an ASA, you can deploy a DAP policy in which you can search for a specific registry key on the workstations that belong to your network.

  You can ask the same questions in the forums VPN, but this is the configuration for DAP deployment guide:

  http://www.Cisco.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml

  Thank you

  Tarik

• How to limit the bandwidth for each different devices connected to my router

  Hello

  Thanks in advance!

  Can you help me to limit bandwidth on perticular devices, I use NETGEAR (WNR1000v2 - N150 wireless router) and the version of the firmware of the V1.1.2.58, like almost 4 devices are connected to this router, I want to limit the speed of bandwidth to each device.

  I have not found the Qos in my Netgear.

  It might help if you provided in details with screenshots.

  Thank you

  Samira

  Not possible with this model of router

• The upgrade 25 users VPN license for 50 users.

  Hello

  Currently I have ASA5500-SSL-25 = license installed on my ASA 5520.

  I want the same for 50 users now.

  Please help me with the part number for a 25 to 50 users upgrade path.

  The order code is "L-ASA-SSL-25-50 =".

• How to limit maximum SSL VPN sessions by group policy on ASA5510?

  How to limit maximum SSL VPN sessions by group policy on ASA5510?

  There are ideas?

  There are 2-Group Policy: within a maximum of 10 connections, in the second - 15 (total licenses for SSL VPN 25 connections).

  Hi Anton,.

  It is an interesting question.

  Please check the following options, depending on your scenario:

  simultaneous VPN connections

  Pour configurer configure the number of simultaneous connections allowed for a user, use the command simultaneous vpn connections in the configuration of group policy or username configuration mode. To remove the attribute from the running configuration, don't use No form of this command. This option allows inheritance of a value from another group policy. Enter 0 to disable the connection and prevent the access of the user.

  simultaneous vpn connections {integer}

  No vpn - connections

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/uz.html#wp1664777

  There is a global command, although may not be useful, I wanted to share it with you:

  VPN-sessiondb max-session-limit

  --> To specify the maximum limit of VPN session.

  Best option:

  What you can do is to create a pool of IP 10 IP addresses in one and 15 in the other, this way you let only 10 connections and 15 respectively.

  IP local pool only_10 192.168.1.1 - 192.168.1.10

  IP local pool only_15 192.168.2.1 - 192.168.1.15

  Then,

  attributes of the strategy of group only_10

  the address value only_10 pools

  !

  attributes of the strategy of group only_20

  the address value only_20 pools

• Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Hi, can someone help me to disable a user especially wifi?

  Hello

  Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Because I gave the WiFi setting for the particular user who uses more bandwidth. So, I need to disable his WiFi without his knowledge

  I need help on this

  Thanks in advance

  Waiting for a good and simple suggestion

  Change the WPA2 password on your wireless access point and tell them what it is.

• Setting up passwords for new users

  I am the Admin of my group. How to create a new user account (for other users) that accepts a default password (an I put) then ask to set up a new password?

  I don't have access to all the operating systems that are past their support life, but I thought that he used the same under Windows 7. Can you type net help user and see what it shows options available?  Maybe Vista doesn't.

  Here are the options I want.

  NET USER
  [username [password | *] [options]] [/ DOMAIN]
  username {password | *} / add [options] [/ domain]
  username [/ delete] [/ domain]
  username [/ TIMES: {both |}] ALL}]

  NET USER creates and modifies the user accounts on computers. When it is used
  without switches, it lists the user accounts of the computer. The
  user account information is stored in the user accounts database.

  user_name is the name of the user account to add, delete, modify, or
  view. The name of the user account can have as much of as
  20 characters.
  password assigns or changes a password for the user account.
  A password must meet the minimum length set with the
  / The command NET ACCOUNTS MINPWLEN option. It can have as
  up to 14 characters.
  * Produces a prompt for the password. The password is not
  displayed when you type it at the password prompt.
  / DOMAIN performs the operation on a domain controller of
  the current domain.
  / ADD Adds a user account in the user accounts database.
  / DELETE Removes a user account from the user accounts database.

  The options are the following:

  Description of options
  --------------------------------------------------------------------
  / ASSETS: {YES |} NONE} enables or disables the account. If
  the account is not active, the user cannot
  access to the server. The default value is YES.
  / HOW: 'text' provides a descriptive comment about the
  the user's account.  Surround the text in
  quotes.
  /CountryCode:nnn uses the operating system country code to
  implement the language files specified for a
  helps the user and the error messages. A value of
  0 means the default country code.
  / EXPIRES: {date |} NEVER} causes the account to expire if date is
  set. NEVER sets no time limit on the
  account. An expiration date is in the
  form mm/dd/yy (yy). Months can be a number,
  statements, or abbreviated with three
  letters. The year can be two or four digits.
  Use forward slashes (/) (without spaces) to separate the
  parts of the date.
  / FULLNAME: "name" is the full name of the user (rather than a
  (username). Place the quote name
  mark.
  /HOMEDIR:pathname sets the path for the home directory of the user.
  The path must exist.
  / PASSWORDCHG: {YES |} NO} Specifies whether users can change their
  password. The default value is YES.
  / PASSWORDREQ: {YES |} NO} Specifies whether a user account should have
  a password. The default value is YES.
  / LOGONPASSWORDCHG: {YES |} No.} Specifies whether users must change their
  password at the next logon. The default value is no.
  / PROFILEPATH [: path] defines a path to the logon of the user profile.
  /SCRIPTPATH:pathname is the place of the user logon
  script.
  / TIMES: {both |} ALL} this is the logon hours. TIME is expressed as
  day [-day] [, day [-day]], time [-time] [, time]
  [- time]], limited to increments of 1 hour.
  Days can be specified or abbreviated.
  Hours may be the rating of 12 or 24 hours. For
  12-hour notation, use am, pm, a.m.., or
  h ALL, a user can still log on.
  and an empty value indicates a user can never
  Open a session. Separate the date entries, time with
  a comma and split several day and time
  entries with a semicolon.
  / USERCOMMENT: 'text' Add or edit the user allows an administrator
  Comment for the account.
  / Workstations: {computername [,...] | *}
  Lists up to eight computers of
  which a user can connect to the network. If
  / Workstations has no list or if the list is *,.
  the user can log in from any computer.

• Remote VPN users

  Hello

  I would just ask how many simultaneous remote client VPN users is allowed for a Cisco1841 router? Are there licenses required?

  Also, will there be a degradation of the performance of the router if there as 15 concurrent users active remote client and VPN L2L 2?

  Thank you!

  For IPSEC, I don't think that there are all the necessary licenses. For SSL, they (but it still works without the license, but unethical).

  Concerning

  Farrukh